Leviton DSL06-1LZ Decora Universal Rocker Slide Dimmer 300-Watt LED and CFL/600-Watt Incandescent, 1-Pack, White/Ivory/Light Almond
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Unfortunately, not all "dimmable" LED lights are created equal, and neither are all "dimmers." I'm still having the same issue with this dimmer and my dimmable LEDs. I have some experience with electronics and have come to the conclusion that the Leviton dimmer design is flawed in my case. One thing I did while troubleshooting my issue might be useful in diagnosing yours. The dimmer's specification reads "300-watts maximum." LED wattage" Make sure the dimmer's total "load" isn't too high. If you only have one light, it is most likely under 300 Watts. However, if you, like me, have multiple lights connected in series (I have six), the total power consumption could easily exceed 300 watts. Remove all but one of the lights and see how it performs. Check the light's specifications and/or replace it with one of the ones you removed if it doesn't work properly. If the "replacement" light does not work properly AND the light's specifications are compatible with the dimmer's specifications, the dimmer is either defective or poorly designed. I also recommend that you look at the "Comparability Testing" section. Leviton released a document for the DSL06 called "Results." It's on their website; however, many of the ratings are "BETTER," implying that there MAY be flicker with a particular combination, and only a few are "BEST" - - There will be no flickering, flashing, or other similar effects. From completely dark to fully illuminated, the operation is smooth.
A very small amount of current passes through the LED bulb when the locator light is turned on. This current may cause very sensitive LED bulbs to glow. Turn the locator light off to fix the problem.
Yes, it ought to work.
Which is it, please, if it says 5 years in the description specifications?
Selected User Reviews For Leviton DSL06-1LZ Decora Universal Rocker Slide Dimmer 300-Watt LED and CFL/600-Watt Incandescent, 1-Pack, White/Ivory/Light Almond
opener. THINK AGAIN if you think replacing your old light switches with modern ones is a simple task (as it once was). To "economize" my home, I will replace light fixtures and use LED bulbs instead of incandescent bulbs. I went to my favorite online retailer (in this case, Amazon) and purchased a light switch/dimmer that claimed to be suitable for the job. I went with the DSL06 because it met all of the basic electrical requirements in terms of voltage, wattage, and dimmability. But when it didn't dim, I assumed I'd mixed up the LOAD and LINE commands (which I hadn't) or misread the programming instructions (which I hadn't). As a result, I went through the procedure once more. and then there was another. and no dimming has occurred. I spoke with Leviton tech support after the obligatory 30 minutes of elevator music, and what he said left me scratching my head! He starts by going over my wiring, testing, and programming procedures, implying that I had most likely wired the switch incorrectly (naturally). Then he asked for the light fixture and bulb model numbers (WHAT!). I explained that the fixture and bulbs had been installed several years ago and that they had been working flawlessly with a toggle dimmer (yes, Leviton) for the entire time. And, while I don't recommend keeping track of insignificant light bulb and fixture model numbers indefinitely, I did have them! And after going over them, I discovered that I had indeed purchased the incorrect switch. He, on the other hand, was unable to tell me which switch was the correct one. It turns out that there could be up to SEVEN potential switches depending on the fixture and bulbs you have! Not only that, but he couldn't say for sure which of my lights would work! The one he suggested is designed for low-income people. I've had enough of this nonsense about voltage transformers because I don't own a low-voltage transformer. I'm reinstalling the working toggle, oney. As if that wasn't bad enough, the switch isn't returnable any longer! BURN.
The dimmer slider is flimsy and not what I would expect from a Leviton product; I purchased two and they are both flimsy. They send you three different shades of switch colors, which is convenient but wasteful. Greta Thunberg, on the other hand, would be against it.
This dimmer switch is a true rocker switch, which means that the top always turns on the light and the bottom always turns it off (unlike cheaper switches, pressing the top repeatedly will not blink the light on and off). br>br>It's a perfect match for the Decora look. The switch has screw terminals, which are far easier to install than the wire leads found on cheaper switches. br>br>The location LED on the bottom of the switch is very useful for finding the switch in a dark room, and it can be turned off if you don't want it. Overall, this is a good dimmer switch that performs admirably with dimmable LED lights.
These switches are compatible with any "Decora" style faceplate and fit into a standard gang box. Three different (included) colors are available for the rocker panel and surrounding border/dimmer. I prefer the switch style because of its design, which includes a full-length mirror. I bought these for my 75-year-old mother because they had a full-length rocker panel and a slide dimmer on the right side. year- a 78-year-old mother who desired a low-key look with easy access to controls I wanted to keep the look consistent because I was installing them in a switch bank with other Decora switches that were not dimmable. Other switches broke up the uniformity of appearance by emphasizing the "switch" or "dimmer" control. Switches with a similar layout frequently used a very small nub as the dimming slider, which was difficult for my mother's aging dexterity to operate. The low-profile design of this switch's long dimming bar makes it easy to find and move. Finally, these switches have a small yellow/green LED under the rocker that illuminates when the switch is turned off, making them easy to find in the dark. These features and design were ideal for our needs, and they were also reasonably priced, so there was little competition. 1 point deducted: You can't turn the LED on or off, and one of the three I bought flickers instead of providing a smooth, constant light. The switch works fine, but it should have been quality-controlled before being packaged, or the user should be able to turn it off (I have other switches that do).
Just wanted to point out that this switch is shinier than the ones I replaced in 2018. Consider yourself forewarned if this is a source of concern for you. If you're still interested, unlike most dimmers with wires hanging off the back, this one has mount screws like a regular switch. Remember to actually read the instructions on this to adjust the dimmer lower than factory settings, turn the led Light on or off, and select cfl or led bulbs; the lugs allow the installer to wrap the wire behind the screw or insert. See pics.
Finally, a dimmer for my LEDs that not only works but also eliminates the buzz/hum and flickering caused by my previous dimmers. Install was simple; the preset mode is for LED bulbs, but you can switch to CFL bulbs with a flick of a switch. They're also great in a three-person grouping. The other switch is a standard on/off switch in a two-way circuit. One is a five-bulb fixture, the other is a three-bulb fixture, and neither has any issues. I have no experience with or knowledge of the nightlight feature, so I cannot comment on it. The delay between turning on and the bulbs actually turning on is something that takes some getting used to. It only takes a fraction of a second, but it makes a difference. I've also discovered that when these first turn on, they prefer to be on full brightness before dimming.
Related Products For Leviton DSL06-1LZ Decora Universal Rocker Slide Dimmer 300-Watt LED and CFL/600-Watt Incandescent, 1-Pack, White/Ivory/Light Almond
