FIRMERST 1875W Flat Plug Extension Cord 1 Foot, 15A 14 AWG Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In total, there are 16 lines in the item. I measured my finger from tip to tip at 5". At each end, there is 11 feet of exposed cord (not including the bulky fittings or strain relief).
Accordingly, their rated power output is 1875 watts, which is the maximum you should apply to a household 115 volt circuit, so they work.
As the smallest end measures 1 1/16", you won't be able to insert it unless there's some wiggle room with it.
There is an 1875 Watt rating on it. Using this cord with a space heater that uses 1875 watts or less is permissible if the heater's rating plate or label indicates that.
Selected User Reviews For FIRMERST 1875W Flat Plug Extension Cord 1 Foot, 15A 14 AWG Black
The wire seems to conduct electricity well. This warning(s) tag is roughly an eighth of the length of the product. I have no idea what all of the legislative and legal precedents that combine to produce this item are, but I know their parents are proud of them (and spent an enormous amount of money on sending them to expensive universities). There is a need to educate in this.
I needed a one-size-fits-all cord Cord that had a 90-degree bend on it A degree plug was used in my horse barn to run the water bucket heaters (the buckets' cords just reached the outlets, but the outlets weren't wide enough for them). It would have been better to refrain from using rotating plugs since it was a dusty environment, and I wanted to minimize my exposure to it. The cord I was searching for is exactly what I needed. This unit uses a 14 awg wire (heavier than most), so it can handle a load up to 15 amps. There are many short extension cords on the market that only use 16 awg or 18 awg wires, so they can't handle nearly as much current as these powerhouses. There are 16 cords on the cord. From tip to tip, the tip measures 25" (412mm). It is 11 feet from the end fittings bare cord to the end fittings bare cord. As the cord extends away from the plug, it is attached to the 5-prong outlet Place two extension cords at the 11 o'clock position so that they can both be plugged into the same duplex socket. I have to say that it's tight fitting (see the photo), but it works. Plugs are low voltage, so they are low profile. There are just 9/16" (14mm) of thickness. While that's great if you need to hide it behind some furniture, it does make it harder to unplug because there's not much to grab. There, the small lip is what makes the difference. It looks to me like these cords are extremely well made, so I expect them to last a long time even in the extreme cold and heat.
5 minutes of research will tell you that not all extension cords are made Since most extension cords aren't designed to handle that load, I found that most will overheat when I tried to use one for just a small 900W microwave. It is not easy to find the information on here, but this cord had the following information attached to it Small enough to fit in a.
With 37 years' experience in the electrical trade, I'm an electrical contractor. Any electrical items that I purchase without seeing them have always put me on edge. In spite of that, this adapter is excellent. Well designed, reliable, and My wife and I purchased a new home and it has exterior GFCIs that have plastic bubble covers. With this adapter, I can plug into the outlet while leaving the cover raised this allows me to securely close the cover once the plug comes out of the opening at the bottom (fortunately, the grounding opening on the recept is to the left when facing For the backyard outlet, I will purchase another one. This is a great deal at this price. Well worth the money.
I'll give you the pros first The technology will also work with power strips that have perpendicular connections (sideways with the power strip These photos are of the product being marketed). There's a con with this film They followed one after the other. Due to the limited space available, I decided to cascade the plugs/wires between the vertically-mounted power strip and the flat plugs I had. The only way to use these connectors is with every other connection. That doesn't allow me to have enough connections for my needs. Here are some pictures (please see attached). Due to my inexperience, I rated the product at four stars, since the manufacturer provides measurements. As well as the reasonably priced item, I will be keeping these products (3 in the pack) because I'm sure I'll need them in the future and the quality of the products is excellent.
Due to the angle of the design, the outlets must be forced into position if you wish to use both outlets. This would never be a situation where someone would use this on one outlet and not another, so I don't understand why it wasn't tested on two outlets next to each other. The system seems to be working well overall, but the design could use a little tweak.
The cable is slightly pricey compared with others, but you get a thick 14 AWG Since my microwave needs to go flush against the wall and the original plug poked out 3 inches from the wall, I use one behind the appliance. The only outlet in my bedroom is up against my window so I also use one for my window air conditioner- The 18 or 16 gauge versions aren't as good as these as they can handle more watts.
As soon as I tried to pull them out, they wouldn't come out and I will need to get some.