LG Electronics 4036ER4001B Washing Machine Tub Seal/Gasket
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Yes, if you're referring to the tub gasket.
In your case, the correct Tub seal for your model WM2050CW I am Terry from AppliancePartsPros
This item is not mentioned in the description, so I wouldn't recommend it.
Your model will be compatible with this. A call to Cierra *br> A call to the AppliancePartsPros
Selected User Reviews For LG Electronics 4036ER4001B Washing Machine Tub Seal/Gasket
When you go to the point of assembling the two tubs of your LG washer, you must follow the following instructions Make sure this tub seal is replaced, 2) tighten all tub bolts evenly by hand so you can feel the effort, 3) visually check the condition of the tub flanges, 4) mount the tub in the appliance enclosure and run the lower pump / drain To figure out if there are leaks, fill the reservoir with a few gallons of water. Final assembly should be carried out if there are no leaks. This is a genuine/authentic part. I highly recommend it.
It took about a week to get all the parts for a complete bearing, gasket, seal replacement. Everything arrived well packaged, and the machine is now quieter than in previous Please remember that this is not an easy repair. The video is 32 minutes long, but freeing up the old bearings will take a lot of time and is Make sure to use ear plugs or ear protectors and plenty of WD40 or locktite to prevent If you want the drum and tank to be free of residual crud, you will need a lot of old rags and towels to clean up all of the years' worth of debris. However, it turned out to be a satisfying task in the end.
For the LG washer plastic tub, should you ever decide to rebuild your Lg washer, do not hesitate to order this part since.
When I put grease on the rubber sealing, it broke a few inches above the red mark. There was a rubber string made out of it. There is supposed to be a red mark at the top of the I'll need to watch the water leak at the top of the drum to make sure there are no leaks. Keep an eye on yourself.
The seal between the tub halves cannot be replaced with the original (4036ER4001B). needed to replace the spindle bearing and the spindle seal of my LG washer model WM2487HWMA. Old bearings were pretty shot - for example, my wife and I had to yell to hear each other, even though at least one of us was in a separate room from the washer. Since I had everything apart, I found no better time than now to Seal between the plastic tub halves (K1414434ER0002A) and there should be no leaks. The 4036ER4001B is a security token This part of the review is being discussed). During the removal of the lifter assembly, one of the bolts (4011FA4353E) spun inside the unit WR4433ER1005A), and I had to cut the head off the bolt to remove the lifter, so I needed two bolts and a lifter before reassembling. All the details seem to have been taken care of.
Took me 4 hours to replace it and that was with me taking my time. It saved me $2000 over the cost of a new washer and dryer! That does make sense, because that's what my wife would have bought, because THEY MUST Yes, I know, it is the reality for all men. It's been great working with you.
you replace the bearings or spider on your washer, you might as well replace this as well. You can get it for a low price and it.
The product fits perfectly and is exactly.