Ekena Millwork LL1S12X02500BL Lifetime Vinyl Standard Shutter (Per Pair), 12"W x 25"H, Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
During this order, the shutter screws will be provided.
White shutters are available in various colors, such as "Bright White." You can order shutter samples if you like. This item number can be used to order them Colors of LVSample
Generally, the shipping lead time is intended to communicate the maximum shipping lead time, however, it may be shipped sooner than expected.
All weather conditions stayed on your shutters in all types of weather conditions, which would indicate that you have the proper number of screws keeping them in place. Whenever new shutters are of the same size as old shutters, remove old shutters and place them on top of the new, then drill through the existing holes in the old shutters. With your new shutters, you will receive new screws. It is not necessary to use all of them. Be careful not to overtighten screws when re-installing The installation process.
Selected User Reviews For Ekena Millwork LL1S12X02500BL Lifetime Vinyl Standard Shutter (Per Pair), 12"W x 25"H, Black
Shutters like these are lightweight, but rigid enough to stay sturdy even if they aren't rigid. Rather than a real name, there is a fake one They do not have a wood grain look after priming, painting, and hanging them on the house, but they pass for real wooden trim. In order to install the shutters, you need to hold the shutter in place, drill two . 5" holes through the shutter and hold them in place. You need to hammer the anchors or bolts into the house after you have drilled 5" into it. Once they have been installed, the anchors are plastic and have a fairly large button head on them. These have teeth that can't be pulled out once they're installed, so they're impossible to remove. As an attachment system that would sit flush with the shutter, I can fill over the screw, sand, and paint to make the screw invisible - but I was expecting an attachment system that would sit flush with the shutter. However, that is not the way these things Despite their presence on the end, the white buttons still jut out, so it is important to measure and space them evenly to produce a harmonious visual balance.
Moreover, it arrived in undamaged condition and brand new. So, what are the reasons for my 3 star rating, you might be asking. It is the actual product that I have rated three stars. Let me Initially, I bought one set to test if it could replace another set on the backside of my studio building - whichever is the best. However, I won't replace this shutter at all! I will replace all the shutters on that building but not this one! After I removed the old shutters on the test window, I noticed that their hinges were attached to each other by two little chains. In addition to the old set having an internal wood frame, I realized there was an external wood Due to the lack of an internal frame in this product (the Test Set), it is My opinion of the shutters is that they are attractive. These aren't all that To install them, you need to drill and screw the screws in all four corners of the shutter. There needs to be an internal frame for this shutter! It would make the shutters more durable AND could be installed with hinge brackets since it would have an internal frame. A frame installed or attached within the shutter may inhibit its operation Whether it would bend or twist when handled or installed is unknown, so I wonder what its durability would be like. As a result, it could be mounted on the actual "structure" of a door. If this mechanism were implemented all four corners of every shutter could be covered with screws without having to drill into their faces AND thus no holes would have to be drilled into the faces of every shutter once they were installed You wouldn't need to drill 8 holes in your siding for each window or screw 4 screws into your exterior siding for each shutter. When the shutters are installed, do you want to see four screws on the front face of each one? I suppose some people don't mind having holes cut in their exterior siding to check out the surface hardware. If an internal frame is installed, then ALL of these gripe points could be corrected. It's good I purchased only one set after I did a test. I'm also glad this desk is on the back side of my studio facing the forest! To prepare for possible leakage from directional rain, I poured a ball of silicone caulk into each tap hole prior to installing the shutter. I am especially concerned about the screws on the bottom of the Despite the overhanging roof, the top screws are partially protected, but we pre-caulked all 8 holes no matter what. If I were to purchase again, I would definitely buy it NOT AT ALL! Because they are flimsy, they lack an internal frame, and since the shutters do not have an internal frame, their installation requires 4 screws through each shutter AND 8 holes in the siding surrounding each window.
This product was used on the second floor of the building and it looked The fact that they were on the first floor would have been less appealing if they had been prominently placed. What you pay for is what you get A good place to buy these is at a bargain price They are clearly looking at it close up. There is no reason for them to look poorly made, but It's obvious that they're not good at what they do Most people would not mistake these for real wood they are made of plastic. It's true that most people wouldn't be able to notice that level of detail unless they were perfectionists or had shutter experience. As long as these are all your budget will allow, you are good to go!.
You just have to know what you're getting into when you buy You can screw these down and they will bend to the shape of your house when you screw them down. There are no perfectly flat parts on the steel siding, so when screwing these in, there needs to be a small gap to prevent them from distorting. They seem to work fine all in all It probably would have been better to epoxie some plywood, or maybe even plastic rod, to the inside back of these to stiffen them so they wouldn't bend, but the result still turned out very nice without any stiffening.
There are two windows next to each other that will be outfitted with shutters. When I started measuring things I discovered that the shutters are actually 12 3/16" to 12 1/4" wide at the mounting surface (see attached photo). The space between these window frames is almost exactly 24", maybe 24 1/8". While I can make them work, it will require a lot more creative thinking and engineering than I I already have 15" shutters mounted on another window, so that is not a problem for me. Putting the paint on and installing it was fairly straightforward The design is great, and they look terrific. I have updated It took me a while to finish the two windows adjacent to each other. The show is up and they look good, even though it took some creativity to get them there. The photo shows how to do this.
It is inevitable that shutters that are exposed to direct sunlight will On the back of the house, there are plenty of shutters that have shade unfortunately, on the front of the house, where it gets full sun, our shutters are dull and faded, and we've only had them for Since the plugs are placed in a way that cannot be removed to spray paint, you can't remove them. Having to drill them out and not being able to reuse the plugs would result in wasteful practices.
I am happy with how they turned out. Plastics must be primed before painting, which is why you need to do so. Furthermore, it is quite thin, so it will bend and sway as soon as you put the provided hardware into I hope everything turns out well for you. The anchors and screws are included. Before putting the screw on, I primed it, then painted over it with a matching shade of paint. The solution worked perfectly.
I used it to replace a set of wooden shutters on a wall that gets a lot of weather (sun, rain, The wood had been scraped and painted so many times I was tired. The vinyl shutters should work, but we'll have to wait and It has been my great pleasure to buy vinyl shutters for other homes in the past. These are definitely as good as the ones I bought previously and cost much less! In addition, they came a lot faster than the ones I bought 10 years.