Barrette Outdoor Living 73044963 Heavy-Duty Gate Wheel, Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Using the Boerboel heavy duty gate wheel, up to 200 pounds of force can be supported.
Located on the Boerboel Gate Solutions 73044963 Boerboel Heavy-Duty Tilt Keys In the Black Heavy Duty Gate Wheel, there are 2" between the inside edges of the installation slots while 2" separates the center of the left slots from the center of the right slots. Three hundred thirteen".
A 3/8 inch bolt is wrapped around a 5/8 inch cylinder.
There is a 200 pound load capacity for the heavy duty gate wheels from Boerboel. Two and three eighths of an inch is the travel distance for the gate wheel.
Selected User Reviews For Barrette Outdoor Living 73044963 Heavy-Duty Gate Wheel, Black
My goal is to have this installed by I am generally pleased with the design and construction of the product that arrived safely to me. way the gate swings and operates while it is open and closed is crucial to the functionality of the device. Turning 180 degrees causes the wheel to spin and not hit the gate as it turns. That would seem like a simple thing to do, but they don't do it. Unlike many of the other models, this one appears to have a very durable tire, and the steel isn't flimsy either. You will find four slots and two holes in the attachment holes. Precisely mark the location of the slots, do a little prestress on the spring, and then tighten the other two screws as soon as the spring is In order to help hold the very heavy gate up as it was closed, I needed to help hold it up. In total, this spring offers a little more than 2 1/2" of movement. My driveway is sloping, which is good, since I have a sloped driveway. There is a difference of roughly that much between open and closed. It said 200 pounds of weight, but my only issue is with the weight rating. Even though I weigh 150 pounds, I was able to compress this with just my body weight. As a result, it is nowhere close to what I had in mind. There may be two of them needed. Eventually, the 7' wide gate on my property will start to sag since it is attached to a 6x6 post. In the hopes of preventing it from happening, I will try to stop it from happening. In the meantime, I'll update if there are any difficulties. But it seemed a good value, and most issues could be resolved.
There is no way it can hold 200 pounds. With the first rotation, the assembly bent, and we had to weld it back together. As a result, the bolt bent in its entirety. This product is not durable in the slightest.
I had to buy some bolts I had to replace the ones that came with it because the heads broke.
The lag screws are provided, all you need to do is drill holes and attach. This gate rolls easily over uneven surfaces and makes the gate's hinges easier to handle.
As I made my own leaf plow, I used these to assist me. I did not feel they were As a result, I upgraded the springs for more weight capacity by welding in reinforcements and upgrading the springs. They work for swing gates well the way they are currently stocked. As a whole, the unit is well constructed, and the wheels are solid.
By hand, I wouldn't be able to move the spring.
There are a lot of things going on in the photo, and you can't really tell from the picture. It is essential that the measurements are accurate. In addition to being strong and heavy, it also weighs a lot.
Despite it being a heavy duty wheel, the wheel is worn down enough after just a few months to have to be replaced.