Adjust-A-Gate | Steel Frame DIY Gate Building Kit | 36”-72” Wide | Up to 6’ Tall | New Black Color | AG72-LTP
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The fence gates 5 are designed with this in mind. The tallest person in the room is 6 feet. If you plan on leaving some space above and below the vertical bar, it needs to be 45" tall. Then it would not work for any smaller gate. It comprises AG36 and AG36-A Designed for gates up to 36", the 36 is ideal for short gates. It may be a better fit for your needs to use that model.
If you have your own latch, you can use it. The frame is flipped over when it is installed so that the hinges and latches are on either side. The AG72 uses a hinge design that would allow it to swing in or out, however, you may need to use a different latch if the unit is to swing out.
I agree - To determine the width of your door, measure down from the top of the top hinge to the You should drill two holes into the post - one 1/2" down from the top and one 1/2" up from the bottom A pre-existing condition To install the bottom hinge, drill a hole slightly smaller than the hinge bolt, and then tighten the bottom hinge where you need it. To install the top hinge, leave the hinge loose . The bottom hinge should be mounted to the 4 bolt and the top hinge should be attached to the top 4 bolt.
Designed to work with posts made of wood, it can easily be used with other types Based on the material that the post is made of, you may just need to find a different solution for connecting the hinges to it.
Selected User Reviews For Adjust-A-Gate | Steel Frame DIY Gate Building Kit | 36”-72” Wide | Up to 6’ Tall | New Black Color | AG72-LTP
As can be seen in the picture on the box, it is sturdy enough to let a person stand on the unlocked side (but only if the hinge anchor is strong). The assembly is relatively straightforward, but the installation needs some basic knowledge. The hinge bolts of mine were mounted to a concrete pillar, which I decided to drill and epoxy. installed a latch on the gate that has been designed to be opened by both sides without having to reach It looks great! I'm satisfied with the result.
There are rarely any reviews from me It was not just a matter of building a gate with this product, but I had to tell anyone who was considering building a gate to look no further - it's the best around! If you want this product, it is It is a complete set of instructions and the hardware runs perfect! My mouth dropped open when I realized how easy it was to build a gate with the Adjust-a-gate system Into the gate! You will not be sorry if you buy it.
Usually, you will be required to attach the latch via self-tapping bolts into the I can't think of a way around this. It is necessary to use a 3/32 drill bit and a 9/64 drill bit to open the hole up. The hardest drill bits you can get are titanium drill bits. You can get them for a reasonable price (Harbor Freight or another company). In all, gate installation was easy except for having to pick up some drill bits from the hardware store.
Due to the fact that I've never built a gate before, this kit was the perfect one for me. Because I do not have the support I need with the 4x4 posts, I will need to add wheels to the gate. It was very useful to use the cable to square off my gate since my driveway is not level anymore. It was necessary to change the position of the brackets as the gate does not open the way I originally intended. It was a simple process of adjusting. My only task is to push my way through the gaps and close them off like I want. Although they are bumper to bumper now, my cars are still able to fit behind the gate.
In addition, the instructions and some of the components were not very It was not the best material for the screws on the sheet metal (Replace the screws with replacements instead of using sheet metal screws! My son in law welded a long latch bar that works perfectly to replace the one that is not set up properly. By notching out the two sides of an existing fence panel for the bars, an existing fence panel was transformed into a tool for mounting the bars and connecting the 2*4s. It took about an hour for two people to install the wing and about 15 inches after welding the wing. Take your time and do it right, as that is what I recommend. The poor instructions led us to having to redrill the two extra holes in the gate hinge due to the lack of extras.
One more is on the way. Easily adjusts to fit a wide range of gate opening sizes. The gate I have opened requires another, and I will get another one of these for it.
In and of themselves, the gate kit and frame are fine, and the gate will swing in both directions, as designed. It is possible, however, to only swing inward with the latch. It is perhaps a good idea to figure out what latch you are going to install before you measure the opening and set the gate posts if you plan to install an outward swing.
I am thrilled to see a product like this! This square and level is extremely sturdy, and it allows squaring & leveling Having a gate that's level is For the gate hinges to be put on, you'll need two people and the strength of your hands. If you can manage that, however, the results are wonderful! Those who want to do it themselves should go for this!.