Goplus Adjustable Workbench, 48" 1500 Lbs Bamboo Top Garage Work Bench, Heavy-Duty Steel Work Table Hardwood Workstation, Easy Assembly

$ 239.99

Score By Feature

Based on 424 ratings

Easy to assemble

9.32

Sturdiness

9.08

Value for money

8.98

Easy to fold

6.29

OveReview Final Score

How Our Score Is Calculated

Product Description

This solid steel frame gives you 15 different ways to adjust the height so that it will suit any project, chair, or task. From 28 to 38 are the tops of the workbench. Various size options are available from 5" to 42" so that it can be used comfortably while seated and whilst This product is suitable for use in a garage, workshop, or at home.

During our manufacturing process, we employ high quality craftsmanship combined with strict quality control to ensure that every workbench is ready for your workshop, and the table's load capacity reaches up to 1500 lbs. Workbenches that include solid steel legs are built to handle everything from everyday use to the most intense

This solid bamboo board desktop is covered in UV oily environmental friendly paint, and made of solid bamboo board. Therefore, we could assure you that there is no formaldehyde in our product and that it is totally safe for use.

All table corners are rounded to avoid unnecessary bruises and scratches, including when it is being used. Adjusting the height of the non-slip plastic table pads on uneven ground is quick and easy, so you will not tilt the table.

The top has pre-drilled holes and that's all you need to assemble it in just a few moments - all you need is an adjustable wrench. The components don't take too much time to put together, so it should not take up much time on your part.

Questions & Answers

Is it possible to drill a small hole in the bamboo top to install a vice?

My vice is very solid, I put an extremely large vice on it.

Do you think I could cut a half circle in the middle of the bamboo board from the front side of the bench?

There is a thin metal frame that runs from the front to the back of the table on the ends, where the legs are, and about 2 inches inside from the edge. If you are cutting in the middle it will not interfere.

How big are the screws on the feet? What is the pitch and diameter of the screws? There is a need to replace them with wheels. ?

Casters will be the right pitch as a replacement for the feet because they have a 3/8 inch screw diameter.

The height of the table at the top setting is how high it is under the table. Is there room for a large box under this?

If so, I'm sure your box will fit. Because I have not extended my table to the highest point and will not in the future, I cannot answer this question accurately, but trust me when I say that it is huge.

Selected User Reviews For Goplus Adjustable Workbench, 48" 1500 Lbs Bamboo Top Garage Work Bench, Heavy-Duty Steel Work Table Hardwood Workstation, Easy Assembly

In the heavy duty category

4/5

It can be used as a table for reloading. The table seems to wobble, as someone said. There must have been a mistake with the assembly. Strong, welded cross members and heavy steel gauge make up the legs. Footpads made from Teflon adjust for a comfortable fit. Anchors for leg bolts are located on the bottom of the table. Two legs and the underside of the table are attached to a metal stabilizer across the back. This table is large enough for me to sit on considering my weight of 200 pounds.

Case Gregory

| Aug 02, 2020

You can get a great deal here! We used it to create a treadmill desk

5/5

We are very pleased with this bench. It is far better than I expected for the price. I would like to note a couple of things Weebles are the easiest to remove if you first eliminate Replace the included M8 fasteners with M10 fasteners to eliminate wobbling in the legs. The stock holes are still able to fit them, but they are much It is ideal to use 5 60mm). We found the packaging to be a bit damaged. Although it did not affect our performance, it is worth thinking about for those who require a perfect packing. The treadmill desk is not quite tall enough if anyone else wants to use it for a treadmill. With 110mm bolts (also M10 1, we replaced the feet. 4) or casters, but you might as well try that. It's just that you'll wish to order casters from Amazon if you want that option. Metric casters tend to be hard to come by at stores.

Lukas Farley

| Dec 18, 2020

The product is exactly what it claims to be

5/5

The pros are Observations 1. There is no doubt that this table is rock solid, it seems like it could support a lot of weight. But wait, it can almost do that! 1. . 2. The assembly is easy, no drilling is required. Lastly, 3. On top side, there is a very appealing finish. The skin is very That's what I did since I put a retractable keyboard tray on it. 4. *br I am very pleased with this purchase. The cons are Observations 1. When it's not in use, it can be used as a second office desk In other words, it doesn't seem to be the prettiest table.

Cecelia Wilkinson

| Feb 24, 2021

The material is thick and sturdy

5/5

In order to use my 3D printer, I needed a sturdy workbench. I was able to store my printer there as well as use it as a computer desk too. In terms of (desktop) its depth is very deep, and even if you bump it, it's sturdy and won't It's quite easy to assemble and you can adjust the height (while putting it together). A great working surface for an office or garage. The finish is elegant and the material is durable. The 200 bucks were well worth it.

Megan Tyler

| Mar 15, 2021

A simple and solid design that is easy to assemble

5/5

My hobby is ceramics, so I bought this to use with it. This purchase has been a great experience for me. I found assembling the table to be fairly easy. Assembly is quick and easy, and the table is rock solid once it's built Without wallowing or moving, I can lean on it without it moving or wobbling. legs of this table can be adjusted to fit any size. The only warning is that to make this table stable you should be very careful when tightening everything, including the bolts that allow you to adjust the In order to get rid of the wobble in the legs, I had to crank down quite hard.

I was pleased with the way my table came packaged as well as the fact it did not have any scratches, dents, or blemishes. It was a great deal to buy the item.

Austin Miller

| Aug 19, 2020

Workbench made of solid wood! Using it as a desk is great

4/5

We are very impressed with the stability and design of this workbench. There were also a few chips attached to it along with the great packaging (see attached photo). This is a recommendation I can 100% endorse.

Milo Key

| Jun 02, 2021

This is a good table, but make sure you use the right tools to assemble it

4/5

I really like the look and feel of this table. There is only one thing I don't like about this work bench its legs can come untightened if you do not use a socket wrench to tighten them. It is vital that you tighten the retaining bolts as much as possible in order to prevent the table from swaying. To remove 'slop' from the table and keep it tight, you should use power tools if you have them. The bench itself is great - other than that.

Remy Bradshaw

| Sep 01, 2020

The stepping stool wobbles, is unstable at its In a nutshell, When you raise the table to its full height of 42", it's so wobbly, it's going to fall over

3/5

This is an unbelievable disappointment.

Magnolia Marquez

| Jan 12, 2021

Related Products For Goplus Adjustable Workbench, 48" 1500 Lbs Bamboo Top Garage Work Bench, Heavy-Duty Steel Work Table Hardwood Workstation, Easy Assembly