Fedmax Work Bench – Acacia Wood Garage Workbench w/Casters – Tool Table w/Adjustable Height Legs – Benches for Home Improvement

You may not be expecting what you are thinking. I'm not sure it is what the pictures depict.

For a workbench, it would be good, if it didn't arrive The table will show blatantly on the assembled table since it is shown in at least one picture as a kitchen table. However, as that is a kitchen table, you should be aware that there is a 59 inch by approximately 6 inch plate that runs horizontally across one side. In other words, one side of the picture will look It doesn't matter if you plan on using it as a workbench, or if you want to put the plate against a wall so you can use it for work. In all the pictures we see when shopping online, the plate is not shown.

However, if you thought you would use this as a kitchen table, perhaps you would not like the plate hanging just one way over this piece. Therefore, you are not able to decide whether you like that aspect or not before paying for it. As a matter of fact, it's hard to see why it wasn't shown to me. Despite not being shown, and even if it had been seen, it would have been hard to miss. It measures 5 feet long by 5 feet tall, and runs along the edge of the top just under the edge of the wooden surface. My guess is that there were just no camera angles that included In addition to its natural beauty, wood is also quite strong. There is something likable about the metal finish, with its silver and black mottled appearance. A table of this size should theoretically be decently sturdy. However, the bolt fasteners that hold the wooden top against the wall just barely touch the surface of the top. The quality of the product is poor. My fasteners fell out of one of the holes due to its irregularity, bore too large a size, and an oval rather than round hole. This kind of thing is time consuming and expensive My heart is not in good health, so I cannot simply pack this up again.

Brayden Rich

| Jun 30, 2021

From the reviews I've been reading from other users, it appears that "the Internet complains With this workbench you will have a decent sized, sturdy worksurface as well as an attractive hammer holder. A nice oiled finish acacia wood top with a good grain and a paint finish on the metal. The price is also lower than equivalent options at $200. If I needed to make jewelry, solder, or whatever I wanted on it, I could use a stool with it since it adjusts up high enough. There is a metal bar at the back of the workbench that prevents it from being used as a freestanding table accessible from all sides, but this is a workbench, not a table, and is designed to be placed Anyway, as you can tell, I like it and it's a great addition to my work area.

Kaiser Carey

| Dec 07, 2020

I was impressed with this product. It seems to be of high quality. It is beautiful to see the wooden top. In addition, many places pay attention to the needs of the customers. There is a plastic sleeve around the manual, for instance, and the package is exceptionally well done. I still gave it 5 stars, though there were a few things that held me back. I.
1. There is something questionable about the advertisement practice. Wood products from this company are claimed to be harder and stronger than those from Although their competitors had wood that was 50% thicker, they didn't mention that. In my opinion, I highly doubt the fancy wood in this product is sufficient to compensate for the major difference in thickness. Having just received the product, I only found out it was defective. Furthermore, it has a metal backplate to support the legs on one side of the table, which appears not to be visible in this This means that it is not aesthetically correct to place the table in the middle of the room, again, like it appears in the picture. 2.

There is a small error in the location of the backplate hole (or the leg hole, you get the idea). It took a lot of force to assemble the product. 3 In Manual, there are many errors in the writing. The words in all caps. It would be much easier to understand if there were a few pictures.

Lexie Ruiz

| Jul 04, 2021

I wasn't expecting much since it's from Amazon and only costs $200. Its build quality is excellent, it was easy to assemble, and it is almost too nice to use for a work bench (nearly). Perhaps I can buy one for my man cave. My only concern is that at max height, it's a bit wobbly and. too heavy for it to stay steady. An additional level of weight distribution is added to make the weight distribution even.

Laylah Bridges

| Apr 07, 2021

A starred review is in order because this is one of the best movies out Workbench for a relatively low price. This is a very good performance as a result. I was pleased with the weight, easy assembly, and even though there were some complaints, I found all the holes lined up and everything fit together as it should. However, bolts are the only exception It is difficult to unscrew them and reinstall them because they are painted with something OVER top of the nuts This screw turns. It was just plain dumb of them to do it that way. A few needed real effort to break away, though most came apart easily. As soon as the bench is assembled, it is very stable and solid. The answer is unexpectedly yes. As soon as I added the vice, I added the wheels (provided). This platform is nicely stable, even when it is on wheels. In addition, the chair's height can be adjusted in a wide range. of the top is very hard and It is not solid oak like 5" of solid oak, so I do not expect it to be as sturdy). Despite the lack of space in the packaging, it was well protected and came with (disposable) metal corners protecting the top and foam and cardboard that protected it well. Despite some screw issues (see below), the instructions were clear and it took only about 20 minutes or so to install. The adjustable feet and lockable wheels of this chair (on the front only) were a nice touch. Not sure which direction I will go with Finally we come to the bar parts. They're not terrible but a bit clunky. In this frame, the corners are a bit off. In spite of the fact that it is stable and solidly built, it is not really square when you look closely. A sloppy job. As you screen in the wheels, you can see that those bolts do not appear straight (although they fit in fine and roll well). The whole thing is just a collection of "adequate" parts that all work fine, but the work is evidently sloppy. The top is exactly as described - not too small, not too big It looks thick, but it feels thin when you see it. It will feel uncomfortable to hit it or put too much weight on it, not even in the back. The front has no brace (you'll feel comfortable putting foot on it in the front). Aside from being surprised by the thinness of 24", I was also surprised by the texture of the wall itself. Please make sure you do not need one deeper, but again do it exactly as described. There are no differences between how it is advertised and how it is delivered What they promised was exactly what they delivered. As a whole, considering it was relatively inexpensive, I thought it was a good deal and would The product is sturdy once assembled, has a good height, is adjustable, and is fairly The end result is quite satisfactory for me.

Cali Dawson

| Jan 10, 2021