DOZAWA Workbench Caster kit 700 LBS Capacity Heavy Duty Retractable Workbench Casters All Steel Construction Urethane Wheels[Upgraded]

This is on my workbench, which I estimate to weigh more than 400 pounds. Although the bench is top heavy, they can lift it and I can move it around. However, it is a little tricky since it is heavy. Compared to most Asian imports, it appears the casters are of good quality. It is also heavy enough to support the foot pedal. There is no such thing as a complaint instead, this is an issue that should be noted. It is recommended to install the plate in the following order It appears to be just a typo for "bottom" since it is four spaces from the "button". The first version of mine has been installed. As it worked out, we placed our lift about 5" from the floor (just for convenience) and found it the right height for smooth floors. Adding to the aggravation is the caster tool that comes with it. You will need to hold the nut that's on the caster stud and tighten the top nut onto the lock washer in order to install it. One wrench is provided you need one end that is 17MM and the other end that is 14MM (for the stud nut). My socket is 17mm, so I used the included wrench to hold the stud in place as I tightened it Upon further inspection, I discovered that the wrench was too thick for the space and was jammed in place when the top nut was tightened. My next step was to loosen things up again, unscrew the wrench, and grab the stud with a pair of arc joint pliers once again. Shroud is gripped in the hand. To install the casters, just use your own tools and leave the included wrench at home.

Eliana Ward

| Oct 27, 2020

There are no screws of good quality. In their own right, the casters are well constructed and sturdy. It is problematic, however, to install the screws. Phillips screws are made of very soft metal and have Phillips heads. In the first couple times, the screwdriver bit pops out of the screw, hollowing out the screw head, making it impossible to back out the screw, or to continue to drive the Make sure you have some quality stainless steel screws before beginning your installation so that you won't have any problems.

Lyric Howell

| Jul 31, 2020

This will give the wheel a special amount of clearance. Mount the wheels at 1 1/4" from the bottom of the leg. Get a better set of screws instead of throwing away the old Star heads are what I use, and I drill a pilot hole before I use it. When you mount the wheel hardware you have a hard time reaching the mounting holes. Except for that, the system seems to be working fine. You can get it for a cheap price.

Emerie Bishop

| Jan 27, 2021

For what it costs, it is an extraordinary value. The pros are I like these casters because they are so well built and they work great. I found installation to be quick and simple with easy maneuvering. The con is Casters of this type are extremely expensive, significantly more expensive than anything else on the market. It would have been impossible without Covid Personally, I would not have given them a second glance, as the fact that it could be delivered overnight and I didn't have to leave my house determined my decision.

Kairo O’CONNOR

| Aug 22, 2020

Soft screws are included with the kit. The same is true even without pre-existing Having drilled holes in hardwood bench legs, I ended up with two screws whose heads had sheared off, and two others whose heads had As the heads are tightened, you can see them flex. You'll save yourself some headaches if you choose better screws to begin with. Nevertheless, the scanners are easy to install and I am very pleased with the results.

Cesar Myers

| Dec 04, 2020

Having the system installed was simple, but the screws are cheap and there is no instruction on adjusting tension (two of the wheels just disengage on their own) - a real disappointment. As you can see in the picture, two of them broke on me. On the basis of what I've seen so far, I don't expect these to last long.

Briar CHAMBERLAIN

| Feb 08, 2021

Because of other reviewers' complaints that the screws were of poor quality, I took extra care when installing them. The screws, on the other hand, did not pose any problems for me. Drilling pilot holes for the screws was the most important thing I did. Then I screwed them into place with a hand screwdriver rather than with a drill bit with a Phillips head. These changes made a big difference in my life. As I was installing the lock washer and nut for the wheels, I used my own wrench instead of the one supplied. Please don't hesitate to contact me again. There is a typo in the installation instructions, as has been reported by other reviewers. One and a quarter inches should be left at the bottom of the leg for the mounting plate. The one in the title is not You should be able to see the "button" 4 inches from the top. I would like to apologize for the bad It is a pretty solid installation, as long as you use common sense.

Phoebe Thornton

| Feb 01, 2021

It's one of my favorites. My garage has two sets on tables. I bought them each and put them on the tables. I'm sure glad I have the ability to move all those heavy work tables around so easily. Putting wheels on everything is what I want.

Cameron Norton

| Jan 18, 2021