InSinkErator SilverSaver Sink Stopper, Polished Stainless Steel, STP-DS
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
3 is the answer. The diameter of the circle is 25"
There is a stopper here that will fit a three-inch pipe Approximately half an inch diameter for the sink hole. It's recommended that you use InSinkErator parts and accessories with InSinkErator units for the best results.
There are 1.5 years to go on this one.
Thank you so much. You're the best! It's recommended that you use InSinkErator parts and accessories with InSinkErator units for the best results.
Selected User Reviews For InSinkErator SilverSaver Sink Stopper, Polished Stainless Steel, STP-DS
The product is as advertised and works as designed. I have an opening of three inches for my disposal It provides a good 3/8" diameter, so I think it would work great for a 3 inch. This door also has a 5 inch opening. The center of the container lets little food particles pass through when it is lifted, keeping silverware and other objects out of the disposal. With this, you can't go wrong if you have an opening from slightly under to slightly over three inches. The 375" to 3" range. It is five. There is no better solution than this.
A STP is being developed This 2016 InSinkErator Evolution Spacesaver 5/8-inch Sink Stopper is the perfect companion to the 2016 DS InSinkErator Silver Saver Sink Stopper You can purchase HP disposal at It is my mother who has taught me these things The law is from another country and does not speak English at all and jams every document given to her with Both sides of the sink should be wiped down. Eventually, the sink would back up every few days from both the disposal side and the pipe side. My solution was to install two In each sink there should be one. the problem has been I will publish the next issue next week. Silverware was going down the disposal, so it makes sense that the InSinkErator Silver Saver Sink Stopper prevents that type of action while still allowing the garbage to go down If it's in the up position, only peelings and cherios and other small pieces of food go into the disposal as opposed to As with the Silver Saver, the Silver Saver twists down into the stopper to plug and fill the sink, and it appears to hold water just fine.
I paid full price for these products and was not asked to review them. Furthermore, I am in no way associated with InSinkErator.
The sink is sealed remarkably well when water is needed to be retained. However, when the sink is open, it has excellent flow. It is bright chrome against a stainless steel sink, but I have not been bothered by it. If you need to, you could probably dull it a bit with a scrubby or steel wool. However, I have not seen the need to do so so far.
I am pleased with the performance of this element, as it fits correctly into our sink drain (with an InSinkErator disposal), and can be used to drain freely or to seal and fill the sink with water for cleaning It's the first time I've used this type of stopper with a disposal in my kitchen. I've usually used the simple plug that comes with the disposal when it's the idea of having the ability to keep the stopper in place and allow the water either to drain or seal it, without completely removing the stopper. This waste disposal drain's finish is designed to match the disposal itself, which is a nice chrome finish. We are completely satisfied with our purchase. As you can see, this is the original InSinkErator product and it came packaged properly.
It has been years since I have found this wonderful stopper. As far as I am aware, it belongs to the original InSinkErator that I installed in my kitchen sink over 30 years ago, and although the rubber gaskets had swelled and become soft, the stopper itself is still in excellent shape. One of the best things about this device is that it does not come with a stopper and a (sometimes decidedly unpleasant) straining basket to swap out. To close the drain, tighten the inner cap a bit and the drain will drop down. You can open the drain by lifting and turning the valve the rest of the time. As soon as I run my garbage disposal with this device in place, I notice tremendous sound reduction. By picking out all the large debris before running the disposal, I am able to quickly flush the small bits down the drain while the cap is still One disadvantage of using it would be that an object up to about 3/8" in diameter can break through the straining basket and end up in the garbage In the very few instances when this has happened to me, I have had to use my very large tweezers to remove the object. Though a little pricey for what I only really needed to replace the rubber gaskets on the thing, I was glad to find a replacement after 30 years.
It is imperative that I say this loudly I recommend you buy this product. There is an American Standard 1 in my possession. I purchased a 25hp garbage disposal with a terrible black rubber drain insert that let so little water down the drain that I had to cut pieces out of it (and the disposal still did not As soon as I received this product, I removed it (easily) from the package, removed the black rubber insert from my sink drain, and pushed this one in. Once the rubber ring attached itself to the metal ring inside the drain, I could feel it "pop" into place. It took less than five seconds to install. This product has the most important feature of allowing my sink to drain effectively. It also has a great feature of allowing for easy cleaning as needed since it has a design that makes it easy to clean. Its third greatest feature is that the stopper is attached and all you have to do is swivel the top piece to get it into place and it drops into place effortlessly. I had no issues with seepage, you can easily lift the sink back up to let the water drain, and it looks so much better than the
When it comes to this one, it's tough to go wrong, and while I haven't had the cabinet long enough to comment on its durability, even if the finish started looking bad a year from now, I would still buy.
Those who reviewed the manuscript in the past are gratefully acknowledged. Our sentiments are the same as yours What was the reason for not automatically including this with Insinkerator's garbage disposal? InsinkErator makes this product for the Badger 5, which is indeed made by this company. According to its design, it works fine. In addition, the accompanying product notes note that you should avoid exposing the silver plated finish of the Silver Saver Sink Stopper to harsh chemicals, which may corrode the finish. Before you pour in any heavy duty drain cleaner, remove the sink stopper for the duration of the procedure.
Stainless steel comes in a wide variety of finishes, so it's utterly amazing how many different types there are. Polished stainless steel is what this one is listed as. My gut instinct told me that it didn't match my sink as soon as I saw it. There is a fake chrome finish to it. The next day, the equipment was returned. I've attempted to purchase a stopper on Amazon twice now, and the finishing on both had been poor. The other one has the same cheap feel to it. While I like the idea of it staying in the sink so as to prevent large objects from falling into the disposal, the mechanism is fairly simple and it generally Despite the fact that they might have it in the right finish, I still am not confident that it will last.
I am going to have to bite the bullet and purchase one from Kohler that will be five times more expensive.