6501KW2002A Washer Rotor Position Sensor Assembly (OEM) for LG Kenmore Washer - Replaces PS3529186 AP4440680 by TOMOON

In the 11th grade, my daughter I have attached a video of a dangerous screech coming from my old LG front loading washer (model WM2801HRA). After talking with an appliance repairman, I was told that my dryer was toast and I had to buy another. I replaced this sensor since it was such a simple design, and it seemed as though the motor that was failing might be the cause. I need a screwdriver and two sockets for this job and it took me no more than 15 minutes. By spending just $10 I saved over $1000 on a new washing machine. Moral of the story don't waste your time and money! Even if someone is an expert in something, you cannot blindly believe everything they say!.

Eliana McDaniel

| Jun 09, 2021

We had a problem with our washing machine (LG WM3570HWA) (drum did not This error code is LE. My typical thing these days is to search YouTube for ideas regarding what might be wrong. The LG person told me the motor was locked, so I just had to reset the machine. We couldn't make it In the videos I eventually found, it stated that I needed a new hall sensor and cable bundle and to absolutely make sure I got the original LG part.
So, I ended up at one of the parts depots online. Then another, and I could only find one place to order both the sensor and cable(s) without a backorder or being out of I was going to have to pay $90 for them to be delivered within two I found this hall sensor on Amazon to be the best reviewed one, and it was cheaper than the actual LG sensor. I would have it in 2 days with Prime because I have it for less than the non-Prime option The "real" LG part from one of the other places would cost more than the shipping cost. Therefore, I did not hesitate to take the risk. A washer has a capacity of 5. 5 gallons. This year marks the 5-year anniversary of his birth. However, I cannot comment on whether this product or sensor will continue to exist over the long term. I have only been working with him for around three I can say, however, that the two YouTube videos I watched on installing and replacing the television were very simple, and did indeed prove to be correct. As a matter of fact, I spent more time cleaning up behind the washer and dryer (come on, is the space behind your washer/dryer really clean? Is that true? The cables, it turns out, are still working as they should We didn't experience any inadvertent wear like they said would be possible I would be happy if it bothered to last another five years like the stock part did.

Rylan Bowen

| Mar 18, 2021

This was my last hope that my washer would not be a total loss. It seems that my LE error struck just in time to coincide with the expiration of my extension warrant on the WM4270HVA front load washer. It would not spin, acting as though it was unsure if it wanted to spin right or left, and about two minutes later, I would get the LE error code display. I have 3 minutes with you. We tried resetting it, pulling it out of the wall and holding the start/stop button for a few seconds, but nothing changed. Additionally, it sounded like the motor was grinding as if it was trying to move the drum, but nothing appeared to be My research took me to YouTube where I found a bunch of videos that discussed the issue as being this sensor. I admit, I was nervous. I thought it would be easy, but it was a little challenging. tried to remove the part that covers the drum motor to prevent damaging it. I had to be careful and nervous that I might break something that ended up costing me more money or worse have to buy a new washing machine. The hardest part was removing the bolt that secures The wrench I had for adjusting was The nut had to be loosened with some elbow grease, and I was able to break it loose With the screw driver inserted in between the metal to keep it from turning while I tried to loosen the bolt, the rest was basically the same. Once the bolt is off, you have to wiggle the rotor away from the washer motor but after that it's straightforward. My intention was to not put it all back together and find out the problem was with the drum motor, so I ordered this sensor as well as the drum motor (from another vendor). It's a blessing that the sensor resolved my issue, as I'm already on my third session. Though this part - with the drum motor, and the harness - is covered for 10 years by LG, the labor is not. Having said that, I did not want to spend $300 on a technician A job that took me about one and a half hours to complete ended up costing me $400. In my opinion, it was exciting to test out the solution and see that the 56 year old woman who created it resolved my issue on her own. As a note, I also bought some Loctite, the blue kind (not the red) for the bolt that holds the rotor motor on, it says to use it so that the bolt does not come loose depending on how much agitation the drum does. You have to be careful with it because it comes out of the tube quite quickly and is As for the sockets, folks were correct that you needed both a 10mm and 17mm size. Hundreds of YouTube videos are available, so you are sure to find something that suits your needs. I recommend buying this part from this TOMOON, you will be pleased with the results.

Harlow Joyce

| Mar 01, 2021

I was able to fix my problem with such a small part that has very little to it. The washing machine stopped spinning and I was getting a LE error code. A youtube video demonstrates how easy it is to install this part (see below) and how it saved me the cost of a brand new machine. The price is good, the part fixes the problem, and it's a small part. We highly recommend that you at least try it before you throw it out. To repair it, it takes about 30 minutes. The maximum number of bolts was 67 and the maximum number of screws was six.

Sawyer Murray

| Jun 14, 2021

I was still able to use it, and now my LG WM3370HWA washer is working as it should. On this 16-inch monitor, the "LE" error at the start of each program is fixed by this part My washer is an old model from years ago that used to work perfectly. It was a pretty simple job to replace As difficult as it was to pull the magnet hub off the axle was pulling off the magnet hub.

Lucia Meyer

| Nov 09, 2020

" In the wake of receiving a defective part from a different brand (Beaquicy), I ordered one of these TOMOON parts. It's amazing what a difference makes! I made no modifications to this one and it worked perfectly, snapping right into place on the stator without the need for any modifications (it appears to be of the same It's like night and day when it comes to quality. In retrospect, I should have ordered the TOMOON part first, since I saved a great deal of money doing this repair myself. However, I wasted a lot of time and energy ordering the garbage Beaquicy part first. It had to be completely taken apart again for us to check the stator, wiring harness, and control board, only to find that they were all fine, and it was the awful part from Beaquicy that was to blame.

Liam Meyers

| Jul 13, 2021