SWELL Wakesurf Creator Slim H3X Plus
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The answer is yes!
My 2004 Mastercraft X-series is in good condition There are no issues with it on Windows 10
You should be able to do it as long as you have a flat surface about 4" below the water line and around 5" from the end of the boat.
Apparently, the owner advised me not to tie any sort of rope to the holder. As long as it floats, it is okay. I did not think it would float, but it did! You should keep an eye on it just in case it falls If you secure it well, it won't come off that easily
Selected User Reviews For SWELL Wakesurf Creator Slim H3X Plus
The boat I was using had limited room, so I had to use the slim model. I wasn't able to secure the Swell well enough the first time I used it, so it fell off. The good news is that You don't have to attach it to your boat and make it vulnerable to damage. I tried to secure it properly when I realized how to do so, and double checked to make sure it held no matter how hard I pushed or pulled. It was all history from there! So I started the boat at full throttle and forgot to remove it, and it was still attached even when the boat hit excessive speeds. In the meantime, until I upgrade to a boat that comes equipped with surf gates and other gear, the Swell will remain an integral part of the setup.
A couple weeks ago, I received my new Swell Wakesurf Creator Slim H3X Plus Wake Shaper After ordering it, it arrived in a few days, packaged well and was in great condition. Overall, I have been very pleased with the performance. I have also used other shapers in the past, and I feel this is well built and provided an excellent wave, yet I find it to be more compact and light than other manufacturers' models. Taking the following factors into account is most *I even used it first* Without a doubt, this shaper is great. It didn't fall off during my test and it floats (I tried this first).
It's too early to tell much about the performance We were a bit disappointed to spend this much money and to receive a partially assembled product with one suction cup retaining pin loose and the cable not attached I have been missing a clip. In the event that it were to break while safe in a box for shipping, I would be skeptical as to how sturdy it will be if it is tossed around in turbulence and subjected to 4500 lbs of force and 360 horsepower. Water is being pushed through. Since I can't find a professional to repair it, I will need to do it myself. When it fails, they will say it was my fault!.
A slim design at 7/8" width fits perfectly on the I liked that the shaper could be adjusted in size, and also in I made a washed out wave without a shaper that was really clean and long with a lot The construction is high quality and the installation is easy. This combination was used with an additional 650 pounds of ballast on top of full factory tanks in the rear and an extra 400 pounds of ballast under the port side seat under the Make sure two people are in front of you. Waves made by this great product are great.
I love this. It works really well. It is so much easier to make the switch on the Walker now, and takes only a few seconds. There will no longer be a fill and a clean. If you have an x45, this is a must have!.
Despite the all-star creator line, I love the wave I get with the H3X and I like how easy it is to adjust. In the future, we'll be able to tailor the wave to maximize our boat power and efficiency. The Mastercraft I have is now surfing like a boat worth more than $100k. I like the fact that the suction cups are strong, and the unit seems to have been well constructed. The costs are well worth it, in my opinion. Designed for boats with uneven or stepped hulls, this wakeshaper can help you out!.