FlipSurf Wake Shaper for Wakesurfing - Easier Magnetic Attachment Let's You Switch Sides in Seconds | Adjustable Angle Wakeshaper, Floating Wakesurf Creator, Collapsible for Easy Storage
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In the case of jet boats, FlipSurf does not work.
It is only recommended to use FlipSurf on inboard boats. The use of outboard boats or inboard motors behind a surfing boat is not recommended.
Two strong stainless steel screws are used to secure the mounting brackets to the boat They will not be removed at high speeds since they are taped on both sides. It is a very reliable tape that we use. Also, the brackets are low profile and designed to float through the water to prevent them from falling
Attaching the mounting brackets to the boat is done using two strong screws You can also use double-sided You can install It in a couple minutes with very little effort.
Selected User Reviews For FlipSurf Wake Shaper for Wakesurfing - Easier Magnetic Attachment Let's You Switch Sides in Seconds | Adjustable Angle Wakeshaper, Floating Wakesurf Creator, Collapsible for Easy Storage
I am a new wake surfer. In my Centurion FX22, there are two factory fat sacs at the rear and factory hard ballast at the front. It was a decent wave on Stock, and I was able to surf it but not The rider may have gone ropeless without the wedge if he or she was advanced. The purpose of this purchase was to help extend and push the waves. It just came on a couple of days ago and I've been using it. The angle of the boat tilts downward of 5 degrees when surfing, so I installed the ring at a downward angle. It would have been great to do a 10-day trip Despite my boat's downward angle of 15, I could not make it work. As I reached out to FlipSurf directly, they said the downward angle should not matter as they tested it in both directions. In my head I thought the angle would give a bigger surface area when I moved so I copied that. So I put it on and immediately I was amazed by how large the wave was. It didn't make me a better surfer but it made it simpler for me to surf. As I explained to my wife, this is how the wave should look. The next day I went sailing in a Malibu LSV23 with factory surf gates, and from a quick glance, my wave looked identical to his, and my boat cost one fifth As far as the suction style goes, I have not tried one, but I don't think they are any better either. The bracket would also be much easier to attach to and it would also be possible to switch side of the boat. With my long arm, I can reach over the side and put it on in less than ten seconds. Attachment must be done from a distance, without entering the water. They seem like they might be more difficult to attach thanks to the suction bit, but I don't have any The pros include This wedge is easy to install on the boat
It is easy to swap sides on the wedge
Never came off while using and can be collapsed for storage
good customer support
Cons Be sure the magnet base is always attached to the boat. The way it looks is not a problem to me, and it floats right at the water line, so you can't really tell it's there. This is TDLR This is a great way to get better at surfing with large waves. Easy to install, and a real game changer!.
FlipSurf is the best wake shaper product we have tried. It's much easier to use than suction cups, and can be worn on both sides. We used to have a hard time putting on the other wake shapers, but now we can all adapt. He was the only one who could put on and take off the suction cups. He usually had to jump in the water to set it up and take it down. Sometimes it took a little while for us to switch With FlipSurf, it takes a fraction of the time it used to. Besides being great, this product also comes with other great features. A wave like this never fails to fall off our Malibu Wakesetter LSVs, the wave is enormous and has tons of The wave is as clean or bigger than any new surf boat on the market. With just stock ballast, we are able to surf with four to six people in the boat. In the pocket, when I am at the bottom of the wave, the top is about at my hip, and maybe even This wave had a lot of room to maneuver since the pocket has a lot of space and provides a lot of It was a lot of fun and my husband was able to move up and down the wave with no problems. We had some questions about installation and the FlipSurf customer service was excellent. The FlipSurf is mounted so it is up to an inch under the surface of the We found it to be very effective. It is so easy to attach and remove the boat from this device that I am still amazed at its ease of use. When we tried to shape our suction cups, we had serious difficulties.
Installs easily and allows you to switch between wake sides easily. Furthermore, if you drop it or it falls off (which has not yet happened) you can rest assured that it won't sink since this is a float. In order to make it more visible, we should make it a bright colour. There will be new options in bright colors, I'm told.
Installing the software is quite easy. I've been using it for a few weeks and I'm very pleased with how it works. There is an increase of about 20 percent in wave size compared to other wakemakers. I need to ensure everything is properly in position before I leave. I am very satisfied with the purchase.
I think this surf device is underrated, the way it secures itself is amazing. There are about three sides to it, and the waves created by it are amazing. The 2008 Supra 22SSV is running this in my car. The seat mounts far back in the hull, and when it's time to fold it comes out flat to be stored under the seat. This is a great deal! There's no need to worry about it being heavy.