TOKO T14 Digital Wax Iron, Yellow, 1200 Watt
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
This iron isn't the same as the one I reviewed previously. Without a costly transformer, it would not work in Italy. It's designed to be used in the United States. With a 110 volt supply. 220 volts are used in the Eurozone.
No, there is no iron rest included.
I'm not sure if the iron heats up to 160 degrees, but if it does, you're probably risking serious damage to your skis. When I turn on my iron, it automatically heats up to 130°C, but I always reduce it to the lowest setting possible. Many of the junior racers I work with have damaged bases and, in some cases, damaged cores as a result of being treated with too-abrasive chemicals. Irons that are extremely hot. I strongly advise you to use a different wax if your wax won't melt at 160C. Please accept my apologies for the lecture, but wax is less expensive than skis.
Unfortunately, we do not. There are only 120 of us.
Selected User Reviews For TOKO T14 Digital Wax Iron, Yellow, 1200 Watt
I bought this Toko T14 to shrink aircraft fabric, so temperature control and precision are important to me. It was the (correct) USA version that I received. Because there have been some complaints about the temperature control, the first thing I did when I got it was to take my own measurements. Note: I've read a few reviews on here that say their electronic non-fiction books are great. They assumed they had received defective contact (IR) thermometers because they showed low temperatures. It's important to note that unless you have an IR thermometer that can be adjusted for different emissivities, it won't be accurate on this (the basic, non-contact method). Only opaque surfaces can be accurately measured with adjustable IR thermometers - Unpainted metal, silver, reflective surfaces, and other similar materials are not permitted. For more information, see: When I set my Toko to 135°C (275°F) and used a cheap, non-reliable thermometer, I got about 116°F. I had an adjustable infrared thermometer on hand. I took out my multimeter and connected a Type-A cable. I took a K thermocouple and pressed the end against the Toko iron's base with a little pressure. The indicated temperature stabilized around 276 degrees Fahrenheit, indicating that my T14's temperature indicator was spot on. br>br>While the unit itself appears to be sturdy and well-made, The temperature control dial is constructed in a cheesy manner, with a loose and inconsistent "ratcheting" feel. It has the impression that it will not last as long as the rest of the unit. The other "gotcha" is that if you set a temperature, wait for it to stabilize, then lower it, the green LED indicating that the temperature is good will remain lit, and the only indication that you've reached your desired temperature will be when it begins cycling on and off at that new temperature. As a result, rather than "temperature is AT what you selected," it's more like "temperature is AT OR ABOVE what you selected. " You could easily burn something if you don't keep an eye on it and don't realize it's much hotter than you expected.
Aside from the dial action used to adjust the temperature feeling cheap or like I over-did it, the iron's temperature needs to be fairly precise. The physical build and quality feel of the iron were impressive, but it never reached a temperature that was even close to what was advertised. (100°C to 160°C) I used a high-powered oven. To test, I used an end digit laser thermometer with a maximum temperature of 55 degrees C. I assumed I had received a faulty item. I returned it, and Amazon promptly sent me a replacement. AMAZON IS MY FAVORITE SOURCE OF PRODUCTS! It got even worse with the second one! The highest temperature reached 52 degrees. I double-checked it with two separate laser thermometers as well as my own hand!.
Waxing cross-country skis If you're like a lot of other cross-country runners, you're probably looking for a If you're a cross-country skier, you probably started with a budget iron from Swix, Toko, or [insert other brand]. These are serviceable and will suffice for softer waxes or anything as cold as Blue. If you're working with a harder wax than that, you'll likely waste a lot of wax, time, and effort trying to get it into your ski. This is due to the fact that economy wax plates are thinner, lose heat quickly, and are difficult to measure temperature. I spent the better part of 15 years getting by with this type of iron, and while it technically "works," waxing was often a time-consuming chore due to my iron's flaws. br>br>In this review, we'll be looking at the Toko T14 iron: Waxing has become a pleasurable experience once more. The distinction between this iron and the standard entry-level iron is that this one is a bit more expensive. It is immediately apparent that the Swix iron is at a level. The digital display on this iron shows the current plate temperature as well as the target temperature when adjusted. This allows you to precisely dial in the right temperature for your wax, which is critical for avoiding wax waste and ski base burn. The second point to mention is how well this plate retains heat. When you run the iron down the ski to melt in the wax, it loses very little heat and melts evenly from tip to tail. Furthermore, the heat is uniformly distributed throughout the plate. This is in contrast to economy irons, which lose heat quickly and often have a plate surface that is hotter on one side than the other, necessitating the use of more or less pressure on different sides of the iron and more melt-in passes. TL; TL; TL; TL; TL; TL; TL; TL; TL; TL This should be your first choice if you're thinking about getting your first XC wax iron or upgrading from an economy iron.
It's far superior to using a repurposed clothes iron. There's no more smoldering wax, and there's no more fiddling with inefficient temperature controls. When the wax was flowing out, it seemed to maintain a consistent temperature. Once you've bought something, you've only got one chance to cry about it. Years ago, I should have replaced my clothes iron.
In comparison to my old iron, this one is a huge step forward. The iron can be easily matched to the "iron temp" displayed on Swix glide waxes thanks to the digital readout. I can melt glide wax on with one slow pass of the iron (about 15 seconds) because heavy iron holds heat well. Although the wax melts, the ski's base remains warm.
The fact that the temperature can be set to a consistent temperature was appealing to me. Changing the temperature of the iron for a different wax is a bit too difficult.
It is very popular with the law. This was purchased as a gift for my son. I gave it to my brother-in-law for Christmas, and he absolutely adores it! He, my daughter, and my grandchildren all ski, so it gets a lot of use and hasn't caused any problems!.
My Swix cheapo is stomped on. The heat is better held by a thicker plate. When it comes to temperature control, digital is preferable to a guessing knob. In addition, I believe it is 2x the watts. It's something I wish I'd ordered a long time ago.
Related Products For TOKO T14 Digital Wax Iron, Yellow, 1200 Watt
![Dope Skate Wax Bar [Blueberry Kush Navy]](https://cdn.overeview.io/9160622_1642876980893_0.png)
