CVLIFE Rifle Bipod, 6-9 Inch Adjustable Super Duty Tactical Bipod
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It appears to be a good fit for your 17-year-old daughter. When the bipod pins are loosed, they will slide into the rifle's sling mount stud. The tension wheel on the bipod is then turned to tighten it up. It fit perfectly on my Remington 7mm magnum mount, which is similar to yours; hopefully this is of assistance. Good luck with your shots!
If your gun has a screw pin with a hole in it, you should be able to attach your shoulder strap to it.
No, I don't believe so. It's not particularly heavy, has a tendency to loosen up at times, and can only handle a maximum of five people.
You can attach a swivel swivel holder hardware to the stock if you have one.
Selected User Reviews For CVLIFE Rifle Bipod, 6-9 Inch Adjustable Super Duty Tactical Bipod
pod. This was purchased for use with a 22lr plinker. It was a lot less expensive than my usual go-to for under 20 after tax. bi- harris bi- harris bi- harris bi- I thought I'd give it a go. The bi- When compared to a harris and especially an atlas, you can tell a few corners have been cut, but for the average Joe, I'm sure it's fine, and the bi pod would never see hard enough use to fail. For that reason, I think it's fantastic. However, there is one significant disadvantage: after you've loaded the bi- The feet roll as you pod (lean in). Not just the feet, where you could do something to fix it; the feet are actually fixed on the shaft, but the shaft rolls within the sleeve, so there's no way to glue, pin, or fix it without making the bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional bi-directional For the rest of my life, I'll be a one-length pod. I gave it one star because of this. (I'd give it three stars, but I'm afraid no one will read it, and I'd rather save someone the trouble. ) The purpose of the pod is to provide a stable and consistent shooting platform. Only if you're shooting at a barrier that prevents the rolling legs from moving will this be consistent. I don't think there's a viable field hack to fix this flaw, so I hope this helps someone.
So now I'm attempting to prepare for the upcoming deer season.
Creedmoor has a rating of 5 out of 5 stars. This bipod is fantastic! My Ruger American 6 is equipped with it. Creedmoor has a rating of 5 out of 5 stars. And it's fantastic!! It was simple to put together and has withstood the elements in Wyoming, including a few falls. This bipod comes highly recommended!.
In addition to the item's cost - This bipod performs well above average, even when compared to units that cost four times as much. This one costs five times as much as this one. I've bought a lot of similar bipods, and this one is up there with the best in terms of quality for the following reasons:
1. Excellent quality fasteners on legs, struts, and spring retainers (will need to tighten up before installation)br>2. The tension in the springs is just right. Not toy-like, but sturdy, high-quality snappy springs that keep legs in place. br>3. It's easy to set up. br>4. The metal insert INSIDE the metal body, which adds rigidity and appears to reinforce the aluminum mount, appears to be made of steel.
5. Legs have a strong body that does not easily crush and a very solid build.
6. This thing is insanely well-made for the price; please don't raise your prices when I say this, but I'd gladly pay twice as much for it - The price is being held down by the market. If you've ever owned a Harris, you'll know that this is on par, if not better, than the Walmart brand "blackhawk. " "Cons:"br>"br>"br>"br>"br>"br>"br
1. The pins that hold the rubber feet in place can loosen over time, so keep an eye on them. If they do fall out, they're simple to replace - It's simple to maintain if you keep it clean. br>2. The fastening screw (the big round one) is a little short, and it can accidentally run into the base plate before it's fully tightened - This isn't an issue because you can keep tightening, but the circular knob will be slightly marred. br>br>Tipsbr>keep it cleanbr>keep it oiled at the joints (re-oil it once a year). keep an eye on the foot pins)br>oil lightly)br>oil lightly)br>oil lightly)br>oil lightly)br.
It was extremely simple and quick to install, requiring only hand tightening on the front sling stud and no tools. After more than 100 rounds, I was still not loose. I'm very pleased with this purchase, especially given the low price!.
It is very simple to set up. In less than 10 minutes, I had both of them mounted. It folds up nicely and isn't overly heavy. I'm going to the range with them to see how they do.
The springs expand and retract with a great deal of force. Leg extension is very nice and does its job well. The front swivel loop on a Henry H004 swivel kit mounts to the magazine tube rather than the grip ring, so this bipod will not fit properly. If you have the H004, you'll need to machine drill the handgrip and grip ring to be able to mount a swivelnut screw there (disclaimer: any modifications you make should be done by a professional gunsmith). If there is any damage, injury, or death as a result of your actions, I am not liable. ) There's also a video on YouTube that demonstrates how to do it. Models of Savage rifles that it fits perfectly are: FV of Rascal Axis compact, Axis compact, Axis compact, Axis compact, Axis compact, GY 223 and Mark II After installation, a hole on the underside of the bipod allows a sling swivel to be attached. With a 1" sling swivel, it works well. The locking mechanism on different sling swivel brands varies in thickness. The majority of them fit perfectly, but one of mine required a 1mm larger bore. Based on our experience, adding a sling has no effect on bipod operations.
And it's possible that it'll be even bigger. On my high-powered gear, I've been using Harris bipods and have been quite pleased. But on my cheap Savage 22LR, I couldn't justify them. I tried one on and was very pleased. It has a good amount of strength to it. The 6- The 9" version is ideal for flat shooting off a range bench with a standard rear rest; in fact, I use a Caldwell high rest rest with which I glued a piece of 3/4" wood to the bottom. That setup provides me with the ideal, comfortable setup for shooting a Savage Mark 2 22LR on the range bench.
Related Products For CVLIFE Rifle Bipod, 6-9 Inch Adjustable Super Duty Tactical Bipod
