clp Gun Cleans lubricates Prevent aerosol can, 12-ounce/340gm, bf-clp12, Clear (bf10
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Michael, Breakfree CLP, which has been manufactured since 2012, does not contain teflon. On a technical website, I received an answer to the same question.
It works well in places where a solvent or gun oil won't. It serves many purposes for me. However, I use a good solvent to clean a firearm and a good lubricant to lubricate areas that require it. In the long run, there are better items for protecting bare steel. Bill Wilson, after a competition match, removes his grips and drops his. 45 minutes in a bucket of CLP for soaking After the first few shots, it's a bit of a mess! Then he stores it for a few days until the next match.
I don't see why it wouldn't work on a 709 slim; I switched to clp after using it to clean my arms, which I thought were clean. It is an excellent item.
I used a rag to remove some of it instead of a brush. It was able to get around 90 of it with just a rag. I suppose it depends on the depth of the rust. Finding out is well worth the cost of a small can. A good product.
Selected User Reviews For clp Gun Cleans lubricates Prevent aerosol can, 12-ounce/340gm, bf-clp12, Clear (bf10
I was duped for a while by other ridiculously expensive CLPs that claimed to perform some sort of magic because I'm a complete moron. It's complete nonsense, and a couple of them left a couple of my pistols incredibly dry, even after re-oiling. So I decided to give plain old BreakFree a try, something I hadn't done since my Army days. I wish I'd gone straight for this stuff in the first place. THE BENEFITS: br>br>THE BENEFITS: br>br>THE BENEFITS
- NO odor. Or, if there is, it is so faint that it does not bother me. I live in an apartment with very little ventilation and a grumpy wife, so the lack of any offensive odors is fantastic.
- It Works. Very well done. br>Spray, wait a few minutes, then spray again. I don't use CLP exclusively (I always oil my guns after cleaning), but it's a great cleaner that doesn't dry them out.
- The value for money is excellent. br>I made the mistake of spending a lot of money on cleaning products that didn't work nearly as well as BreakFree. It was a good lesson. THE BAD: br>br>
- I can't think of anything negative to say about this product. br>br>I'm very pleased with it.
This is something I've been using for a long time. She's been meticulously maintained in terms of cleanliness, lubrication, and preservation! Simply squirt some in there and let it run back out after a long, strenuous shooting session. Wipe her down thoroughly to ensure she's completely lubed. Check for adequate internal lubrication with one or two fingers. Also, make sure it works properly after this procedure because you don't want it to become sticky. br>br>Now that she's nice and clean and properly lubed, you can be confident that she'll be ready for the next "round" as soon as you need her. br>br>But most importantly, keep her safely locked up! While you're away, the last thing you want is for unauthorized fingers to touch her without your permission. br>br>However, on a serious note, this is a fantastic product that does exactly what it claims to do. Safety first, as always!!.
to be used by the military of the United States of America After experimenting with a variety of solvents, oils, greases, and CLPs, this has become my go-to solution. for all of my pew pews to be cleaned and lubed It's also much less expensive than a lot of competing products. br>On rare occasions, I use a different solvent to restore bores and heavily carboned parts to near-new condition. I usually use another oil on rails and other high-value items to keep them in mint condition, and I usually use another oil on rails and other high-value items to keep them If there has been some time between cleaning and use, wear points of contact right before going to the range, but BreakFree CLP does an excellent job of protecting all surfaces and removing gunk from receivers, chambers, frames, slides, bores, hammers, pins, and other parts of any firearm. It's an absolute must-have.
The following is a review of the item that was sent to you:
- The can did not include a cap.
- A portion of the shipping box was soaked in productbr>- Instead of a mist, it sprays in a stream. br>- The stream comes to a halt in the same way that a hose is turned off: Instead of stopping abruptly, the can weakens rapidly, causing a significant amount of product to spill down the side of the can, causing a mess.
- The straw is too long to fit through the nozzle! br>br>Called customer service, who said they'd been having problems with Amazon and that the robots were losing caps during the picking process. It was also suggested that I return the item as damaged (this is not permitted by Amazon!). ), because none of the problems listed above should be happening to me. The manufacturer is sending a replacement. br>br>If yours included a cap, consider yourself lucky. If yours didn't, I recommend contacting customer service, although you should be aware that it took about 20 minutes to get someone on the phone.
I have a 22 rifle (which I have owned and shot on occasion for the past ten years) and an SKS (which I have owned and shot on occasion for about a year). Needless to say, there was a lot of dirt there, but it was significantly reduced after I applied a strong dose of CLP both inside and out. br>br>What I like about this product is that any leftovers aren't harmful like a solvent would be, but instead are oil-based. It looks good and keeps your gun from rusting.
I just got it, and I couldn't help but notice that the label was wrinkly, as if it had been wet or used in some way. When I open the cap, I see a few small spots, despite the fact that it appears to be full. The kicker is that it has the tape but no straw, which makes things difficult when I need to use the straw to power out the fouling from the gas tube without having to strip it down and get into the crevices and hard-to-reach places in the lower assembly. One of the main reasons I bought this instead of just using the Hoppes solvent and separate lube was because of this. br>br>Unfortunately, I won't be able to use the WD40 straw because they now come in a flip-out version. I guess I'll have to go to the local hardware store and see what they have or just spray the guns outside in the rain. Thanks.
Just not sure about the 'L'ubrication, to be honest. As a first-time CLP user, one thing I wish I had known when I first used it was how much it foamed up when it came out of the can. When it first came out of the can, I thought it was Great Stuff. It's easy to use too much and end up with a mess as it drips all over the place. CLP appears to do what it says on the tin. It foams up and gets into nooks and crannies, effectively breaking down carbon deposits. This worked great to remove rust and crud from the blade of my powered circular saw. If you spray too much, you'll end up with a mess that's difficult to clean up. Oil was all over the place, so I used a lot more paper towels than I usually do with other products. br>br>CLP also leaves a thin layer of oil on your machined parts to protect them from rust, but I wouldn't trust the lubricant, the 'L' part of CLP. It just appears to be too frail to support weight. Something else should be used. Aside from that, CLP is trusted by a large number of people. This product is also one I recommend.
He claims he only used this to clean his AR rifle while in Afghanistan. Although the stuff has a strong odor, it is extremely clean - lubricate, lubricate, lubricate, lubricate I've had the best results by running a bore brush or bore snake through the rifle, wiping away any excess fouling with a dry rag where possible, and then spraying down the parts with this stuff. Allow for some time to pass before wiping it away - so simple.
Related Products For clp Gun Cleans lubricates Prevent aerosol can, 12-ounce/340gm, bf-clp12, Clear (bf10
