Fulton XP15L 0101 Swivel Trailer Tongue Jack with 8" Wheel - 1500 Lbs. Capacity
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In the product description there is this information You travel to The length retracted is 12". Measures 13" from top to bottom, extended length 17". A maximum of 25" (measured from the center of the mount to the bottom of the wheel) top clearance is present.
Thanks for getting in touch, There is a lot of support for the trailer I own, which weighs approximately 3200 pounds dry. A two-bedroom house sounds good, but I'm not sure about the cost This horse trailer pulls horses. It would be a good idea to contact the manufacture to discuss the total weight of your trailer and if this jack is strong enough to lift the weight. If you took me up on the offer, but it couldn't work for you, I would be sad about that. I am Dan
You have to be aware of the dimensions of the back end of the car or truck and of the hitch you will be When you are ready to remove the hitch, you will have to jack up the trailer above the hitch. You also have to consider
A 360-degree swivel will be available.
Selected User Reviews For Fulton XP15L 0101 Swivel Trailer Tongue Jack with 8" Wheel - 1500 Lbs. Capacity
This jacket comes with a tongue. To replace the Fulton 1200 lb. press, I needed to buy a new one. On my boat trailer, I have a tongue jacket. There was a welded bracket on the trailer where the jack was bolted to and all of the options offered on Amazon were never going to be an exact bolt-on replacement based on As a result, I upgraded my weight to 1500 pounds. It was not certain that it would be a direct bolt on so purchased the capacity jacket just as a precaution. Regardless, the jack arrived and will need to be assembled (recommended), which can be done after the main piece is installed or before it is installed. The heavy framework makes the assembly easier, but it still takes a bit of time to assemble. had to enlarge two holes on the mounting plate to allow the bolts to line up with the points on the bolt pattern, but the mounting plate is sufficiently thick to allow drilling of two mounting holes to complete the product Even though I had to alter it slightly so that it could be bolted on, I am pleased with the new jack. You may have to do some work to install it, but it's well worth the effort. I chose to use a welded on mounting bracket in order to maintain the appearance of the overall product. It does come with mounting hardware that should make installation simpler.
As a direct replacement for my outdated trailer jack, this was to be mounted on my enclosed In the description, it states that the frame fits up to 3" x 5". The design is silly, so we can be sure that this will not work on any trailer over 4" thick. Responded promptly after receiving a call. As a result of calling the link provided, I ended up speaking with Draw Tite hitches, who put me on hold for 10 minutes and then no longer answered. I returned the unit. Here we go.
A 5 x 8 cargo trailer is used to transport the truck. Construction that is both sturdy and flexible to fit any frame size. Has great rolling ability and a very solid foundation. The 8" wheel is good for a big bag. I am not usually a fan of plastic wheels, but this seems like a sturdy and reliable wheel. Despite the fact that it installed quite easily, I discovered one problem. It looked as though the zirk fitting was broken off, with some of it remaining in the It was a surprise to discover this problem as the box was intact. I will reach out to CS for assistance. Had the issue not been present, I would have given it 5 stars. A brief update Another piece of damage has just been discovered. As a result, the rubber cap on top of the gears is smashed, and water will enter Can you please tell me how I can purchase a.
Due to the loss of the handle on my original trailer jack, I purchased a replacement. I will not be able to use this for all that it would be capable of handling. The boat trailer seems to be of high quality as was the original, I like the large wheel that makes moving the trailer easy, and the zerk fitting for adding grease makes it a pleasure. It would be helpful to have something to hold the handle against the jack body when the jack is folded up for travel, so the handle does not hang down, but a bungy cord or a hook and loop would work well. The unit has so far proven to be good.
This jack is installed on our T@G teardrop camper in place of the original jack that came with it. I like it a lot. One thing to keep in mind is that because the wheel is attached, you can only lower the tongue so much. You could remove the wheel from the original jack, which made it possible to lower the tongue even further. In this case, the trailer will not be able to be leveled. Our group has used this jack several times this summer and has never had any issues with leveling, though occasionally we were a bit tongue-tie. A high score.
It is easy to assemble thanks to the detailed instructions provided, and it's easy to install as well. enjoy smooth operation and the ability to lock the backrest in either clockwise or anticlockwise rotation when it is locked in a There is a high quality grease nipple on the Zirk trailer and its large wheels make the trailer easy to maneuver. There is no indication that corrosion will be a problem for a long time after installation.
The ability to push the trailer a bit left or right when backing up a trailer to hitch up a 4500 pound boat is helpful when backing up and not quite lined up. Install was a snap, and it seems to be a sturdy jack.
As an alternative to my conventional no-wheel jack, I bought this My boat trailer can be loaded to the truck much more rapidly since I just have to move it around instead of aligning it perfectly in advance. In my case, due to the fact that it is a dual tandem, it is not possible to maneuver it from side to side more than six With a 22 foot deck boat, going straight forward/backward is easier unless you are on grass, in which case it is nearly impossible. I found the installation process to be straightforward. Since I have only had it for a couple of months, I am not sure of its quality. The best review I could give it is if it had a brake/wheel lock. It was necessary for me to get wheel chocks to keep the boat from moving when I crank up the jack to remove the trailer from my truck when there is a slight incline/decline. It is important to consider this when you buy a wheel jack of this type.