Qguai Aquarium Thermometer, C/F Switch LCD Digital Fish Tank Thermometer with Large Clear Screen, Monitor Water Terrarium Temperature, No Messy Wires in Your Saltwater Freshwater and Reef Aquarium.
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
a tough thing to do, but I was able to remove one of mine from one tank to place in
If the adhesive works as well on acrylic as it does on glass, I believe it should easily stick to acrylic.
In case of a problem, check to make sure you have inserted the battery correctly, if that doesn't work, insert a small piece of paper between the battery and the cover. If you do not wish to do this, please contact us and we will send you a
A sliding mechanism allows the bottom front section to be removed and replaced. The device is easier to remove when it's not actually attached to a tank, but when the appliance is attached to a tank, you can still change the batteries. The bottom of the screen should be easily accessible if you press both sides with your thumbs (one to the left of the C and another to the right of the A), then
Selected User Reviews For Qguai Aquarium Thermometer, C/F Switch LCD Digital Fish Tank Thermometer with Large Clear Screen, Monitor Water Terrarium Temperature, No Messy Wires in Your Saltwater Freshwater and Reef Aquarium.
I no longer need the floating thermometer whose suction cup kept coming loose, as well as the previous digital device with a wire running into the tank and a tiny, dark screen, because this large display tells me the temperature have been monitoring it against those two other devices for a couple of months, and it appears to be During the last six months, my battery lasted me six A CR2032, otherwise known as the common quarter-dollar A thin battery of the right size. You can see the photos here. On the top edge of the cover, there are two tabs that enable the cover to be attached. You will need to remove the battery cover in order to replace it. To do this, pry it open at the seam along I never got the battery out of my pocket when I finally figured out how to open it, so I had to catch Replacing the battery with the positive side outward is the first step. Then, place the top edge of the cover back into the housing and secure the bottom edge. In addition to pressing the top edge of the battery cover upward, I had to push it upwards to close a gap on its top edge where tabs are located. If the temperature is below or above the minimum/maximum values, you will have to reset them. I haven't tested this function, but fortunately the screen is supposed to blink if the temperature outside the range goes above or below 30 degrees.
This is a very stylish digital thermometer. THERE IS A QUICK DEATH. I have added the following I tried the thermometer for only one week and it worked fine. For the next two weeks it would constantly change from F to C, and I would have to re-test it It is set to run every day. I can only use the battery for three weeks in total. Eventually, he died and was no longer alive I was left with a blank screen. (I am deeply The review was reduced to two stars from five. Peel and cut with "peel & cut" You can also use "stick" This is an alarm function that consists of digital numbers blinking on and off. An alarm sounds but no sound is heard. In order to be seen, it needs to be placed in plain sight. Check out - On the front of this tank is a through digital thermometer that looks classy (see attached picture). The item I chose is what I am glad I bought.
There will be a difficult time reading the numbers if your tank does not have a bright background, whether it is rocks, aquascape, or an actual background behind your tank. The most annoying part about this is the fact that I tested it against my current sticker and a digital probe, as well as Hannah's 81 was the same temperature determined by the digital probe and the Hannah. According to the sticker, 81 is at the top and 77 is between the bottom and top. There are two 79s in the number 1. There is a consistent 9 and it fluctuates throughout the day, but the digital probe keeps reading 81 all the time. My heaters are set to 81 degrees on Day 2 of the experiment. It's perfectly fine to hold down the temperature by half a degree F, but this just won't do when you want to maintain that 81-degree mark. This display would be excellent for a tank with colder water, such as for goldfish or guppies, as you would have a bright background to see the numbers through the transparent display and read them more easily. My intention is to return this item as it does not meet my needs nor is it accurate for what it is supposed to do. Note that this is an external monitor with a foam sticker covering a metal thermometer that presses against your water.
Apparently the little oval thermometer I had been using with the probe was inaccurate, so I felt sorry for my betta. Because of this, I raised the heater's temperature when I was experiencing low temperatures. During a water change, I felt it was too warm, and I found that it was 7 or 8 degrees warmer when I used another thermometer, which I use to check the water temp from the sink when I change the water. tried a few other thermometers, and they all confirmed that the one in front of me was in bad shape. It's a good thing my fish didn't lose its head. As a result, I tried a few other brands, but settled on this one. While the positive reviews gave me some hope, I was concerned about the accuracy of the results. In the end, they proved to be accurate. As I've looked at other ones I've got here for other purposes, this one seems to fit the bill perfectly. Depending on my preference, I may put some white paper behind it to make it more visible, but it went on without a hitch and gave me the correct I agree that it would be worth it if you could place it on the side of the screen.
Wow! I am extremely I ordered it here on Amazon and it was reading the temps in my aquarium 24 hours after I ordered it. There is no installation required as the adhesive cover is peeled off and placed onto the water A spare battery was included with this item. Despite the fact that I have floating thermometers in all my tanks, I rarely check the temperature due to the inconvenience of finding them or being able to read them when not facing where they are. By sticking this on the side of the tank exterior (only drawback is it can't be moved to be used with different tanks without acquiring additional units, which I intend to buy), I can easily monitor the temperature even at Because of its transparency, the display isn't obtrusive and doesn't interfere with viewing my tank. The display is large and does not distract me while maintaining a view of the tank. In the long run, it will reveal how long the battery lasts, but for now, it's doing exactly what I expect it to do and I'm very happy. am very pleased with this tank accessory, which is very reasonably priced (even had a 5% discount on the price!). Going to buy a couple more now.
My initial reaction to this product was skepticism, but I was willing to give it a try, and as soon as I opened the box, I knew it was going to be a great one. This thermometer is very accurate, as I found out from another thermometer I have that I have installed in my aquarium. With the built-in functionality, it will blink the temperature when it falls below or rises above the set temperature limits, which you can set with your finger. The book I recommend to aquarium enthusiasts (especially if you are geeky or enjoy technology) is definitely worth your time.
My tank is 100 gal acrylic and the device works fine with a slight loss in temperature due to A temperature reading of two degrees lower is displayed. It is easy to add two degrees to any reading once you know this. It would be possible to improve this system by adding an offset adjustment so the device could be calibrated in place based on the surroundings it is in and the thickness and material.