homenote Misting Cooling System 75FT (23M) Misting Line + 28 Brass Mist Nozzles + a Brass Adapter(3/4") Outdoor Mister for Patio Garden Greenhouse Trampoline for waterpark
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I say yes! The 1/4" garden drip hose is all you need to run a system without misters, but we did add extra tubing to support areas without misters. However, I recommend that you purchase the set first before purchasing any extra tubing because you may not need it since there is quite a bit included on one end of the set. There are additional fittings and parts included in the package. Heads can be conveniently removed and the set can be completely customized. The best set we have experienced so far. The set was very powerful.
If you rotate the heads of the mist, it will work. Our previous systems aren't bad but this is the nicest and most powerful one we have bought, and we tend to buy at least one It is wonderful that the misters are removable so you can move them wherever you want after hanging them, instead of having them hung in an odd place. In addition to all those extra parts and fittings, there is also a huge difference in the sheer number of extras included. The experience is not to be missed.
Use a regular water hose to water the lawn. There is a special coupling that is used to connect sprinkler side to water hose, but you'll need to buy it separately. If lowe's or your local hardware store doesn't have it, you can go to one
It is true. It would be necessary to purchase a double sided male hose adapter in order to connect the two.
Selected User Reviews For homenote Misting Cooling System 75FT (23M) Misting Line + 28 Brass Mist Nozzles + a Brass Adapter(3/4") Outdoor Mister for Patio Garden Greenhouse Trampoline for waterpark
I was able to install on my 20x16 detached patio without any problems. We spent about 45 minutes on the phone. I've found it to work well and to make a huge There is a lot of humidity and heat in southern Mississippi. About 20 degrees were taken off the temperature. Be sure that you are installing on outside diameters in order to avoid getting wet. During the day, the sun evaporates the mist in order to make the air In addition, only a small amount of water was used. On the outside faucet, I turned the water on about 1/8 of a turn. This product is great and I absolutely recommend it - and no, I am not paid or compensated in any way for my review.
hello there, I just wanted to say that I was able to save over 200 dollars as I decided to try this instead of getting a mid-pressure The nozzles are one of the best features. It is clever and reusable to use these housings. The design is great. I will share with you my tips on how to install without resorting to rocket science I strongly recommend that you 1) purchase the clamps I have shown The coaxial cables are the same diameter as the hose, so they must be made for coaxial cables. As opposed to the little nail clamps that are included, these large screws are faster and easier to handle. 2) Don't skimp on the clamps, two clamps per nozzle will make a good tight fit. This will allow you to pull the line straight and firm. 3) If you can, buy the calcium filter as this will save you from cleaning (CLR or lime away can be used for cleaning. It is helpful if they get clogged to soak them in water for a few hours (make sure you have good pressure). The lowest pressure is preferable (a pressure of 50 psi or better is terrific). I don't want to go over there again 4) don't go back there It's imperative that you wait to change the nozzle spacing until you have them installed for a while. Wind conditions can change and you want to take all variables into consideration before making any changes.
This is an easy to install plugin! In a nutshell, The order was delivered in accordance with the contract. A box with all the items was present. A set of 3 extra mist nozzles is included. A mist nozzle has a total of two mounting holes for attachment. To mount each section, I used ringshank nails that measure 1 5/8 inches. You will have about 8 feet of line between the hose bib and the first mister when the first nozzle is attached. As part of the process I ran a garden hose from the hose bib to the mister line complete with an inline filter installed between the hose and the mister line. I also shortened Taking the "end" mister and attaching it to it is as simple as removing a mister head and installing The line has been flushed before it has been turned In that part of the machine I didn't use, there were four misters that were dripping, so I turned them off and replaced them with the ones I wasn't Nevertheless, I am pretty confident that in my case, they will work fine after they are flushed out. It took me around 30 minutes to install everything after everything was opened and laid out. The unused portion of the board will be used for another patio I have. I have been very pleased with it so far. Any small object getting in the way of the mister nozzel will clog it, which is why it mists water from a very tight hole. It is easy to take them out and flush them.
The length of the hose could be customized easily. At the moment, it feels like it's in the upper 70s on the deck despite the 92 degree temperature here. However, my garden hose did not have fitting threads that matched, so I had to buy a new.
I believe this is a high quality product and it fits well. After finishing, however, only the first half of the misters produced mist while the second half produced simply a narrow stream of water (not unlike a water gun for kids). As far as I can tell, I didn't have enough water pressure for the large array of misters. In any case, the water pressure in my house is adequate/normal. It is recommended that unless you have a commercial water line with much more pressure than my home line, you get the version that has half the number of.
At the entrance to my house, I have a large courtyard. In the center of the courtyard are the courtyard walls of the house, and an entrance portico adorns them. My courtyard measurements are quite large, so I went for the 54' set. I installed the device on my own, but it would have been easier with a second person to help. The moment I turned it on, water began spraying everywhere, soaking my wooden Not long after I made my mistake, I realized what I had done wrong. While installing the hose, every nozzle is a compression fitting, which results in the hose separating from the nozzle assemblies when being pulled along the ground. Two things I did was check each nozzle to ensure it was snugly inserted into the hose, and use anchor clips one in every position. Still, I had a problem with the water only spraying when I was a certain distance away from the nozzle. A faulty nozzle assembly proved to be the cause of my problem. It worked fine with one of the extras I had in my set. Several reviewers suggested purchasing plugs, which I did, and they proved necessary. All of my systems are working great now and the temperature in my courtyard is comfortable. The price was well worth it. The takeaways are You will be helped A tight seal should be ensured on each nozzle assembly A pair of clips needs to be placed on Dummy nozzles are available for purchase. I'll explain how it's done in a minute.
It was easy to install and they were delivered fully assembled. You can just plug it in and start using it. Our first run was a tension line and our second run was 25 feet. We zip tied the mister line to the tension line first so that there would be no sag from the weight of the mister line. One of our runs is 50 feet and the other is 25 feet long. Our purpose was to test out whether this misting system can cool the patio the way we hoped it would. This set was a great price for us to test out the misting system. Everything seems to be going well so far. I would certainly recommend it.
Related Products For homenote Misting Cooling System 75FT (23M) Misting Line + 28 Brass Mist Nozzles + a Brass Adapter(3/4") Outdoor Mister for Patio Garden Greenhouse Trampoline for waterpark
