Twinkle Star Pressure Washer Adapter Set, Quick Disconnect Kit, M22 Swivel to 3/8'' Quick Connect, 3/4" to Quick Release

During the six months since I purchased this set, the quick connect fitting for the water line has failed twice. It turned out that the connector gasket used to connect the inside and outside parts of the connector had cracked, resulting in water spraying out of the connector, reducing the pressure in the spray hose. This reduced the effectiveness of the pressure washer as it was spraying water everywhere. My problem was resolved by replacing the rubber gasket around the o'ring. This product may also cause the same problem to you if you purchase it.

Elliott Munoz

| Sep 10, 2020

I have a gasoline pressure washer that has 3,000 PSI at the moment. There is always a challenge in connecting and detaching the hose and spray wand because they are located on the pump in a difficult spot to see, let alone reach. In recent weeks, my old hose started leaking badly, so I replaced it with a new one. In addition to the pressure washer, I also purchased these M22 adapters so that I could get the washer up and running more quickly. The photo I took does not show all of them. It is well made, so I can expect to use it for many years to come. In order to write a review, I waited a bit so that I could test them out several times. Adapters are great. I am very happy with them. The cables can be easily connected and disconnected, and they do not.

Layton Fields

| Jun 27, 2021

A brief addendum Almost Original (The company contacted me to make everything right, so I went from 1 star to 5, and all the other parts worked from my set)

In addition, when I tried to use the gun to hose, the twist on quick connects from the gun lasted about 30 minutes before leaking at the O-ring. There was a bulge in the ring.

Emmett Macias

| Jun 29, 2021

I have male M22 threads for the washer Outpost. That's how they're referred to as M22. For the input of my wand, there are also M22 threads. A new heavy duty 3/8 x 50' air hose was purchased on Wednesday, unfortunately, it has a quick disconnect fitting. It has one female end and one male end. Therefore, the kit comes with two 3/8"x m 22 male connectors, which if I could remove the male connector from the hose, would be fine. That was put in a vise grip and a 2 was used. There was also a hunk of pipe in the breaker. As of now, you are able to see the start of the I believe, however, that it's made of one unitary piece of forged steel. There's nothing wrong with the hose, but I do think it's cheesy that the fittings can't be removed. In the end I was able to find a piece for 9 bucks with a female 3/8 on one side and a female M22 on In order for this kit to be universal, this piece needs to be included. Since I still have my 25, 1/4" hose and would like the option of adding it, I would like to have that option. An M22 female is attached to each end of the cable. To my point of view, the pieces are all light in weight. However, there will be a lifespan limit to the price. My income is low because I am retired, so I am willing to buy them again if they still work. In this case, if you have non-removable quick disconnects on your hose, and your washer and wand both have M22 threads, an additional adapter is needed. Hopefully I will be able to put the link to Amazon for this

EDOU 3/8" Quick Connect NPT to M22 14mm Metric Fitting for High Pressure Washer Gun and Hose,5000 PSI on the above link. In addition 8, there is also one. I would have to return all my stuff if I did not have.

Sage Lara

| Jun 28, 2021

With these connections, I was able to use my 3000 psi machine for just fine. Included were both ends of the pressure hose, two devices (such as spray wands) and two water hose sets (the faucet end and washer end each contain two parts). It took me about a day and a half to wear out the o rings, so you might want to either look for better quality ones somewhere else, or order This price is not a good bargain, but I think it's "ok. " Although they are lower end parts, my machine can still function properly.

Aziel Ware

| Sep 12, 2020

Do not buy this product! This was the first time I had ever used these on a pressure washer. Smog fit was achieved by using Teflon tape on all threaded connections. As soon as the pressure washer is fired up to wash the car, ALL the connectors begin to leak horribly. Furthermore, I also installed one I got at lowe's so I could connect the wand. that the o rings are all bad, but that is an indication of poor quality control on the part of the supplier. We will ask for a refund or replacement.

Serena Hardin

| May 30, 2021

The price of this kit was much lower than what was offered at Lowe's or Home Depot. There were no leaks and I did not have to use teflon tape to seal the connections. I like that all the connections swivel and I am assured that no kinking will occur due to the swiveling mechanisms.

Will Hicks

| May 29, 2021

The part I purchased was for a pressure washer with a 3000psi rating. It's so tedious having to tighten or loosen the hoses by hand. With this wonderful connector set, you can easily connect and connect your hoses, then wind them up, without having to fight with them like an alligator on a lava bed. If you wrap a little pipe threading tape around the connectors, they won't leak and they will slip on and off without a problem. Great value for the money. The quality is excellent and I would have had to pay four times as much at my local home improvement It is well worth your money and you will not regret the purchase in the least.

Margot Bowman

| Feb 28, 2021