One Stop Outdoor 3/4 Inch - 25PSI Pressure Regulator, Drip Irrigation Water Distributing Regulator - High Flow

$ 10.99

Score By Feature

Based on 153 ratings

Easy to install

8.50

Easy to use

8.13

Value for money

5.96

OveReview Final Score

How Our Score Is Calculated

Product Description

The right sprinkler zone, faucet, hose, or gravity feed can be retrofitted – installation above grade, in a bubbler box, or in a greenhouse

The pipe thread size is 3/4" FHT and 3/4" MHT (Hose Thread).

The pressure compensation range is 30-100 PSI Regulation to 25 PSI

CONSTRUCTION QUALITY UV resistant and highly impact resistant

Questions & Answers

How do I know if it fits on 3/4 hose bib?

There is no tubing thread on the bubbler it is threaded for 1/2" pipe.

When you adjust the pressure, how do you do it?

It is impossible for you to adjust.

Is there backflow in this system?

Accordingly, the liquid pressure at the tail must be greater than at the head of the arrow.

Selected User Reviews For One Stop Outdoor 3/4 Inch - 25PSI Pressure Regulator, Drip Irrigation Water Distributing Regulator - High Flow

A two-month period is enough for this item to fail

3/5

In the picture you can see that the whole unit has started to fall apart as well. After some consideration, I have chosen to replace it with another.

Skye Friedman

| Jul 04, 2021

I had a leak in my basement due to cracked plastic

5/5

This alarm was used inside in a basement so a very protected environment, yet after less than 12 months I woke up at 4am to find it was set off by a basement flood I was able to get to the basement very quickly since I was at home and was able to see that this plastic device from the house had cracked completely (not on the low pressure side) and was pumping household water across the basement at the maximum rate that my well pump could generate. This was the lesson that we Don't use plastic fittings when you have high water pressure in your home.

Cody Whitaker

| Apr 02, 2021

The patio mister would be great for this

3/5

There used to be a source of water spraying from the connection to the misting line before the hose blew. This small, inexpensive part for drip irrigation systems fixed the problem. Water can no longer leak out of the connections or rupture the hoses due to too much water and no place for it.

Sylvie Mitchell

| Jan 02, 2021

Luckily, the water pressure to my water pressure regulator wasn't exceptional because I have a water pressure regulator for the whole house

5/5

There are just too many problems with the housing.

Ainhoa Ayers

| Mar 12, 2021

Drizzle irrigation is made much easier with this pressure reducer

3/5

I am very pleased with the product. Despite not having Teflon tape, the lid did not leak. By lowering the pressure, I was able to stop the hoses from blowing every time I turned on my irrigation system.

Maddox Spears

| Sep 03, 2020

A cheap waste of time and money

3/5

I have my drip irrigation system completely set up, turned it on and it is spraying water out the side hole as I type.

Anderson Wallace

| Nov 09, 2020

The quality of the product is poor

5/5

I have been using it for two months and now it has It was a Rainbird that had previously been working for three years, so I bought it again to replace it.