2 Pack of Pure Tone Full-contact Output Jack for Guitar/Bass, with Mounting Hardware
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
To be sure, These can be used in amplifiers, speaker cabs, and any other application that uses a panel mount jack with solder lugs. Using them to replace circuit board mounted jacks, however, may be a bit of work, and is probably not a job for a novice. Also be aware that tube amps can produce potentially lethal voltages. Take the amp to a professional for the work to be done if you aren't 100% sure of what the safety procedures are for any amp part replacement or repair if you aren%
A standard US spec 3/8 inch x 32 thread per inch nut is used on Pure Tone jacks (the same nut used on Switchcraft jacks and CTS or Bourns pots). They're widely available on Amazon, and we have them in stock (search for quality US thread potentiometer nuts in our store). Thank you for your inquiry.br>
This is usually done with a stereo jack on active guitars. You should use the stereo version (Model PTT-S) instead of these mono jacks. 2) It was created specifically for that purpose.
They'll fit electrosocket jack plates made in the United States. Just make sure you get a plate with 3/8-inch holes. Not an import plate, but a 32 threaded plate like Allparts.
Selected User Reviews For 2 Pack of Pure Tone Full-contact Output Jack for Guitar/Bass, with Mounting Hardware
br>br>Great idea - installed on a PRS, Epiphone Les Paul Modern, Fender Strat, and Squier Classic Vibebr>br> My only criticism is that this jack only comes with one mounting nut. Two are required to make a Les Paul or PRS look factory original while preventing the threads from protruding 3/8" (as they do on a Fender Strat). Thankfully - br>br> This plug can be used with Fender Strat input jack nuts. It also works with the nut from a coaxial cable M2M adapter. Having said that, if you're looking for a straight-forward way to installation without delay The LP and the Strat are two of the most popular guitars. It's that simple. PRS - In comparison to other jacks, their hot and ground are on the opposite side of the jack. br>br>Fender and Squier - Fender and Squier are two of the most well-known guitar brands. The jack MUST be installed with the threads exposed - In order for the jack to fit, you'll need to do some woodworking. The threads were pulled all the way out (as seen in the photo). br>br>Installation is simple, and this is a HIGHLY recommended mod to ensure that your guitar cable is securely attached to your guitar. br>br>I didn't have to do this on a Squier Classic Vibe because it went deep enough, but I chose to keep it like its Fender counterpart. br>br> Will it prevent the cable from being yanked out if you step on it accidentally while moving? Probably. I'm not particularly acrobatic when I play, but it does keep the cable plug firmly in place in the guitar. br>br>A Fantastic Upgrade!.
These are decent outputs, they just stick out too much. Now, seeing as I am a beginner, it could just be me, maybe there is a way to fix it so it's more flush than what it is in my photos sticking out, but it only came with one nut, and my old nuts on my other output would not fit, I tried for an hour trying to get it to work, thinking maybe I wasn't getting the thread started right, but that wasn't the problem, I ordered two of them and br>br>Now, in terms of connectivity, the connection is tight and secure, and the sound is solid, with no crackling or short sounds, making it feel like a great sound connection. So, if you don't mind it sticking out like mine does in the photo with the cable attached, go ahead and buy it.
With every brand of 1/4" plug I've tried, they provide a very secure connection. When mated with a plug, the contact area is larger by design, resulting in better signal transfer. br>Do you notice a difference in the sound quality? I couldn't tell them apart from the jacks I'd been using for decades. br>Are they worth the money, given the connection's security? Definitely. br>I've also used these jacks as speaker output and input jacks, and they work great; I could tell a difference in this situation, and it was a significant improvement. Using a thicker gauge of speaker wire has the same effect.
This plug was just installed in my son's brand new 2019 Epiphone Les Paul Custom Pro Silver Burst guitar. The threaded portion of the original plug shaft is flat on both sides. The new plug is in the shape of a circle. Fortunately, the frame that holds the plug to the guitar is made of plastic, so I was able to file it round and widen the hole. The diameter of the new shaft has increased. It would have been a real job if the plate had been chrome and metal. IT DOES NOT FIT PERFECTLY. You might want to get a new plate with the correct hole size. br>Next, the jack diameter is a little larger as well, but it fit in the cavity. There is no wiggle room when the jack is installed. This is something I'm going to use on a personal import build. Wishing you the best of luck with your installation.
Neutrix has a solid 1/4" jack as well, but it's too big for most electric guitar applications. This is the first time the 1/4" phone jack has been improved since Bell/AT&T. In 1907, T began using these connectors for telephone patchbays for the first time. The infinitely small flat-screen television A 1/4" jack/plug's round contact is notoriously unreliable, especially for small signals, where the low current flow frequently fails to break through the connectors' slight oxide layer. 1/4" connectors are a terrible idea for high-current applications. Speakon connectors were invented as a result. I'm impressed by the fact that the manufacturer used two connections.
They do the job, and they do it well. Even though I often thought I had the "perfect tone" on my guitars, I still have to dabble because I enjoy tinkering with them. Get your cutters, pots, caps, switches, and soldering iron out and get to work. br>br>Just when you think there isn't much that can be done with something as simple as a jack. They went ahead and completed the task. To my ear, there is no discernible difference in 'tone,' but there is a noticeable difference in contact and feel. The two positive tips grip the plug firmly and provide excellent access to the lugs. Yes, they are more expensive than their competitors, but the difference is immediately apparent when you hold them in your hands. I can't speak to their long-term durability because it's only been a few weeks, but these seem like they'll hold up.
I've put these on at least a dozen guitars now, and I'm never going back to Switchcraft. They're sturdy, have a good weight, and grip your cable better than anything else you've tried. br>br>However, they do take some getting used to. I was used to barely pulling on my cables to unplug/switch to another guitar, but you'll have to put in a little more effort with these; however, they'll definitely be able to hang on after stepping on a cable while playing a hell of a lot better than the traditional type. If you're using a wireless device, this won't be as useful or necessary, but they seem to last a lot longer in any case.
Related Products For 2 Pack of Pure Tone Full-contact Output Jack for Guitar/Bass, with Mounting Hardware
