2-Pack 11-Inch Pressure Cooker Canner Rack / Canning Rack for Pressure Canner - Stainless Steel - Compatible with Presto, All-American and More - By Impresa Products
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I use them in a large stockpot for water bath canning. They're what I use to process two layers of jelly jars in the same big pot. I hope this has been of assistance.
1/2 inch and smaller are acceptable. The holes aren't a problem because it's a canning rack, but they could be if you want to use it for something else.
No, but measure your power cooker, then go online and look for one that is about 1 inch smaller than the one you measured.
First and foremost, I do not have a presto canner; instead, I use a standard stovetop canner. And the size and shape of your canner play a big role. There should be no problem if the sides of your canner are straight and have no curves. I have three canners, but only two of them will fit the rack.
Selected User Reviews For 2-Pack 11-Inch Pressure Cooker Canner Rack / Canning Rack for Pressure Canner - Stainless Steel - Compatible with Presto, All-American and More - By Impresa Products
Look at the image. br>br>Another issue is with the design - The rack is not flat enough on either side to adequately support the jars. When I put the racks in the canner with the "finished" side up, the outer raised part of the rack tilts the outer circular row of jars toward the center, causing them to not sit flat. If I put the racks in the canner with the "unfinished" side up, there are three circular raised metal parts that support all of the jars except at the very edge, where there is no support.
I chose this one because it was inexpensive and came in a two-pack, and the reviews were similar on all of them. I was expecting a somewhat cheap flimsy product based on the poor reviews, but boy was I wrong. This is fantastic! They're sturdy and thick, so they'll last for years of canning summer vegetables and meat. They fit perfectly in my canner, and the jars rest evenly on top of them. These are the ones to get if you don't want to have to reoder every canning season! You're not going to be let down.
So I started looking and came across this company that not only has what I'm looking for, but also at a reasonable price. So I placed an order for it, and it arrived a few days later. Perfect fit, very sturdy; I have two of them and will not need to purchase any more. These things are going to last, and these people deserve five stars.
I was taken aback by how light it is, which is a good thing. When filled, the waterbath pot is sufficiently heavy. The best part is that, unlike chrome racks, it does not corrode or grow foreign matter after a few hours in the waterbath. During the processing, some of the product may be released, causing the chrome racks to corrode. This, however, is not the case. Sometimes the entire canning process takes so long, and the pot is so full of boiling water, that I forget to empty and clean it until the morning. This, or rather these, as they came in a pair, should last a long time.
These were purchased to replace the rack that came with my water bath canner (the rack does not allow jars to sit flat). Because I despise handles, I bought these in the hopes that they would be similar to my pressure canner racks. WRONG! They're too thin (you could just put jars on the bottom of the pot). They are far too prone to bending. However, I discovered that they fit perfectly inside my old canner rack, and the jars now sit perfectly flat. br>br>I suppose the problem is half-solved. However, I DO NOT recommend purchasing these if all you want to do is use them as is.
I was afraid I would die or be killed. I was on the lookout for another of those wire racks, but these were much nicer. I've been canning for a few days now, and this is so much better than the old wire system that I think I'll stick with these racks even if I have to buy a new blue canner if mine breaks down. They are less likely to rust and are more convenient to use. There aren't any jars wriggling between the wires. I only had 4 jars left from my last batch of tomatoes and was afraid they would fall over, so I filled some empty jars with water and placed them inside to balance things out. It's unlikely that this is required, but you never know. Anyway, there won't be any more rusty water, and that old rack will be discarded.
However, it is not cheap. This will fit a pressure cooker or canner with a capacity of 20 1/2 quarts. Although it is inexpensive, it is not of poor quality. It took no time to arrive at my home (this was through Impressa Products; I cannot speak for anyone else selling this). It's worth it to learn how to make pint jars (16 jars) in larger batches. Place one tray on the bottom with eight pint jars, followed by another tray with eight pint jars.
Some of these have been described as being extremely thin, but this set is not one of them. My old pressure cooker's rack had started to corrode, so I replaced it. These are a perfect fit and have a nice gleam to them. br>To lift the center of the pot off the bottom, I recommend using them with the raised edge upside down. They're strong enough to hold nine 8-ounce jars without bending or exerting any effort.
Related Products For 2-Pack 11-Inch Pressure Cooker Canner Rack / Canning Rack for Pressure Canner - Stainless Steel - Compatible with Presto, All-American and More - By Impresa Products
