Clockwise Tools DTCR-01 RS232 Digital Indicator Data Transfer Cable

An external trigger can also be added It does not have a detailed description of the 5mm jack. The use of this method can be useful if you require an Arduino (or some other device) that automatically triggers It's a good idea to have a spare three. One fifth of a 5mm jack should be stripped so that the wires are visible. According to the schematic, you need to connect one wire to 0V, and the other to One pin must be connected to the Arduino's 0V and the other to a digital pin on the board. To pulse the pin, first raise it and then lower it. Occasionally, the pulse has to be atleast 250ms to turn the switch on. If it's much shorter, it will miss the Arduino's.

Cairo Reynolds

| Feb 16, 2021

When you thought that using an RS-232 device you would be taking many measurements automatically You would be wrong to think that the 232 interface is compatible with your devices. Every measurement must be performed by pressing the button. As soon as the button is pressed, the box pretends to be a keyboard and types in the value displayed on the dial indicator. all there is to Through the serial communications interface, most of the functions of the clockwise interface were reduced making it "easy to use. " It is not possible to read or write data Using this tool in an automated assembly would be a great idea for people making measurements in an excel sheet, not however for those going about their measurements in an excel sheet. The pros are Please note that There is no need to install a driver - The software is good for tasks in the shop that involve less than 10 measurements at a time. Please note that - Can't read anything from the computer - It is not good for large measurements (> 14" - 10)In my opinion, it is not a good product for anyone interested in automation, so I am very disappointed that I gave it an "rs-" The first impression I had of the software was that it worked like a Rx/Tx device, and I hadn't read more carefully when it said it was a keyboard emulator only.

Winnie Sexton

| Jun 24, 2021

Shortly after receiving the call, I got a direct call from clockwise. In order to make sure I got the right cable, the staff checked to make sure I had it In my opinion, that is exemplary customer service, preventing problems before they occur. There are no problems with the data transfer kit. This is well thought out, and I'm really impressed with it. It doesn't matter what the drivers do. You just need to press the pop-up button of the box and the current value is transferred to a spreadsheet. Then you command line return to move A special trick that you can do with pushing a cell to the right can also be performed by holding a cell on the You've got a good one there.

Blake Sutton

| Nov 21, 2020

I use this along with a digital USB cable to transmit the reading to a PC. I am blind, and this function makes it possible for me to use the unit. My first unit had a problem with it not zeroing when connected to the digital cable, but clockwise tools responded to my inquiry within 20 minutes asked one question, and had a replacement on the way within an A replacement was sent within three days because of excellent customer service. It's wonderful to deal with this company's customer service!.

Harlee Foster

| May 06, 2021

It can be used with Excel and Note Book.

Jamie Cain

| Jul 25, 2020

There is no need for a driver or wedge software. There is no problem with the transfer process. glance, I thought that the cable would not fit into the receiver on the indicator, but it fits perfectly. I like that it's simple and easy to use.

Coraline Gross

| May 02, 2021

If you can only send 0, send I spent money of zero. The zero digit is 00. There is no data to send.

Nathaniel Costa

| Jul 03, 2021

A digital readout and logging system.

Kaiden Hull

| Jul 21, 2021