Amazon Basics Bathroom Handicap Safety Grab Bar, 16 Inch Length, 1.25 Inch Diameter
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I purchased an 18-inch grab bar, but the total length of the bracket is 21 inches from top to bottom.
It is dependent on the environment in which you are installing. Wooden studs, masonry, and drywall with the appropriate anchors The finish rings slide onto the bar, revealing a flange with a few mounting points in most cases. I prefer Toggler brand snap toggles for drywall installation because they have two to three fasteners per side.
We just finished installing two of these last weekend in a tiled shower. To keep the screw plate under the cover waterproof, I used a drill bit that said it was ok for tile and caulked around it. The use of a special drill bit ensured that the tiles did not crack. Studs were also used. For added security, the finder was mounted on studs, and inset anchors were used in tile walls to ensure no pull-out. When you grasp something, it comes out. It took a little longer than expected to install them, but once they were done, I didn't have to worry about them coming loose or posing a safety hazard.
The mounting foot cover measures 3 inches in diameter. The total length is 26 3/4" from the end of the foot cover to the end of the foot cover.
Selected User Reviews For Amazon Basics Bathroom Handicap Safety Grab Bar, 16 Inch Length, 1.25 Inch Diameter
SUPPORT RAILS 25" X 48" FOR ATTACHMENT TO MY 2002 FORD F150 TRUCK I AM 89 YEARS OLD AND REQUIRE THE USE OF A WALKER. I HAVE TO WALK AROUND THE TRUCK TO GET TO THE DRIVER'S SEAT BECAUSE I NEED TO PUT THE WALKER IN THE PASSENGER'S SEAT. I DECIDED TO HAVE THE RAILS BOLTED TO THE TRUCK BED BECAUSE I NEEDED SOMETHING TO SUPPORT MYSELF. WALKING AROUND THE TRUCK NOW MAKES ME FEEL SAFE. THESE RAILS ARE EXCELLENT QUALITY AT A VERY REASONABLE PRICE, AND I WOULD RECOMMEND THEM FOR HOUSEHOLD OR ANY OTHER AREAS.
It was very simple to install into the studs. My stepsons also installed the Moen Bars without studs into ceramic tile using large anchors and tap con screws,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,.
I purchased the 12" grab bar with the intention of mounting it vertically over a stud. Because the mounting plate is welded to the bar, a long screw on the inside of the bar cannot be accessed (see photos). However, because the design included some screw holes that were slightly offset from the centerline, I hoped to use at least four of the six stainless steel screws provided on the offset line. br>br>Unfortunately, even that line is too close to the bar. To avoid breaking out, the 2 inch long, 10 phillips head screws must be installed straight into the center of the 2x4 stud. My drill bit reamed out the center of the inside screw head even with a pilot hole, and I had to remove it with vice grip pliers in the end. I was not pleased with myself. br>br>Surprisingly, the bar only required two screws at the end to secure it to the drywall. I decided to live with it because I only use it for balance. The trim plates were snugly snapped into place, and the final installation looks and feels professional. br>br>The price is exceptional. If you're mounting it in any direction other than horizontal, you might want to consider a different grab bar due to the rigid, welded mounting plate.
We went with the 24" x 1" size. Version 25DIA. I'm glad we didn't make it "fatter. " It has a good gripping diameter and is quite sturdy. I put two in our bathtub, which is separate from the shower. It was a significant improvement in terms of bathroom safety. There are a lot of holes for mounting options, but some of them are difficult to reach with a screwdriver. For recommending a 1/8" drill for the screw holes, you will be docked one point. The long screws are too long for the small holes! Installing the screws was by far the most time-consuming aspect of the project, as I avoided having to go to the hardware store to get a slightly larger drill bit. Even after waxing the screws, I had a difficult time driving them home, stripping a couple of screw heads in the process. Fortunately, only a few screws were required to secure this, and the numerous hole options aided in this. I would recommend it, but use a drill bit that is slightly larger than the recommended size.
GRAB Bar does not comply with the Americans with Disabilities Act (ADA).
Although a quarter inch may not appear to be much, I believe it gives the impression of being larger. The smaller one appeared to be the more affordable option. (This isn't to say it doesn't work; I just prefer 1 1/2"). br>It looks great in my new shower, and it complements the brushed nickel shower head and hinges perfectly. I'm very pleased.
My wife and I are growing older, as much as it pains me to admit it. Things that were unimportant as a child, such as staying safe in the bath tub and shower, become more important as you get older. It was time to install a safety bar in the shower because my wife's legs had become a little wobbly. The funny thing is, I find it useful as well. br>br>I was looking for a stainless steel bar that was not chrome plated at a reasonable price. I also needed one that was 32 inches long so that each end could be anchored into a wall stud (studs are typically 16 inches on center). It's not easy to come across something like that, but Amazon was the best place to look. This AmazonBasics bar is available in a variety of diameters and lengths, including the one I needed (1 1/2" diameter x 32 inches long). br>br>You can mount this vertically, horizontally, or on an angle thanks to the mounting holes. I used a horizontal mounting system for mine. I had to purchase longer stainless steel screws because the screws that came with the bar were not long enough to go through the tile and wall and deep enough into the stud to satisfy me. However, because I live in an old house with plaster walls, the screws might be long enough for your needs. br>br>After finding the studs, I used a carbide bit to drill the mounting holes in the tile. Because the holes in the mounting plate are close to the sides of the bar, I used a suitable extension in my drill/driver to provide sufficient clearance for the drill/driver head when I went to install the screws. If that doesn't make sense to you, you'll figure it out when you mount it. A standard screwdriver would have sufficed, but who uses one these days? br>br>I smeared a bit of silicone caulk along the top edge of the flange and over the top of the screws after mounting the bar and before snapping the end covers in place, just to help keep any water from creeping into the wall. I'm not sure if this was necessary, but it makes me feel better. This thing is rock solid! br>br> It is not movable because it is fixed to the studs. I'm much more comfortable with my wife showering now, and I find it useful as well. Is it time to put the soap away? When you bend down to pick it up, it's nice to have something to grab onto. When you're done with your shower, it's also a good spot to hang your wash rag. It has made me very happy. It's difficult to beat for the price, in my opinion.
This looks fantastic, and we had it installed by a tile specialist in our 17-year-old tile shower. We want to age gracefully in our home, so this was a must for my 75-year-old husband. (My requirement was a walk-in closet. ) Ella's Bubbles has a sit-down tub! This bar was a lot less expensive!.