HONBAY Parrot AR Drone 2.0 Pinion and Spur Gears Upgraded Design and Material Orange Parrot AR Drone 1.0 & 2.0 Repair Gears Replacement Pinion and spur Spare Parts

I had to replace a single spur and bushing, but. Buying this for my AR 2 was a good decision. It all fits the shaft, as in the pictures. I had to replace a single spur and pinion, but ended up doing the whole thing since my friend crashed it hard. I pulled the originals out and they were bent, so getting a complete set was great. It was a big plus to have the extra C clips. However, I have managed to only lose a single new one, but I can see those things flying out of my hands never to Although the gears appear to be thicker, this does not always mean they are stronger, since we do not know what they are made My sole recommendation for other buyer potentials would be to obtain a tool to remove and install C clip clips. There is no need for it to be a parrot brand product. For me, that was the only bit of difficulty about swapping out these parts.

Keaton Lin

| Apr 23, 2021

Despite the order arriving in very good cosmetic shape, the quality of the item is awful. of the props bend easily when they make contact with an obstacle for the first time. In the event of an accident, the gears are also ground off. In the past (original) shafts were hardened and had to be yanked with a lot of force in order to yield. It works the same way for snap on lock washers. As they were installed, they ended up deforming plastically because they didn't contain much spring back ability. The item will not be recommended as a replacement in any way.

Sariah Braun

| Jan 27, 2021

The pins in this product are so thick that I made the cheap mistake of installing them but as soon as I took them off the motor froze because of the resistance from not being able to free spin it. In the past, I never had any problems with the motor. Now I have to purchase a new one.

Julia Thornton

| Dec 06, 2020

It is a little heavier than the original, This was for an This drone is number A total of 0 repairs and resales.

Brooke Bates

| Nov 06, 2020

During my repair of the prop shaft, I bent it. Having the kit meant I had more than enough supplies to complete the task, but it also meant I had As soon as the shaft is inserted, the prop turns This is an easy-to-assemble product.

Avianna McClain

| Jan 09, 2021

There are no problems with anything and AR 2 fits perfectly. It's time for 0 to fly again.

Natasha Grimes

| Feb 01, 2021

Buying this is a bad idea! The steel shafts in these items are not stainless steel. Alloys of this type are inferior. Even a magnet would not hold it. A bend was found on the installation. To get the bushing to go over the tip and seat properly at both the base and the tip, two out of four needed to be sanded and filed down.

Artemis MARSDEN

| Apr 25, 2021

This kit worked great to fix the broken gear. It turned out that the shaft as well had been bent, so it is good that the shaft was replaced.

Robert Hunter

| Jan 10, 2021