WindyNation 2 Inch 2" Stroke Linear Actuator 12 Volt 12V 225 Pounds lbs + Up Down DPDT Switch + Mounting Brackets (2" Actuator, Maintained Switch)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
An arm in a fixed position is attached to the stroke. On a lawn tractor, I used the actuator to get a 2" lift for a homemade snowplow.
Depending on where the actuator is mounted in your application and how much travel is required to raise the door fully vertically, the actuator will operate either way.
As long as the impact does not exceed this pressure, it should be okay as long as the static and dynamic load limits are both 225 pounds.
Selected User Reviews For WindyNation 2 Inch 2" Stroke Linear Actuator 12 Volt 12V 225 Pounds lbs + Up Down DPDT Switch + Mounting Brackets (2" Actuator, Maintained Switch)
As of now, the actuator appears to be working properly. A couple of screws fell out, so that posed a major issue. As a result, I had to be shipped a new set since the first one At least I got parts from them, so I am grateful. The fact that I know how to work on mechanical things saved me from getting into that situation. It's been the switch that's been causing all of the problems. After being used for a few hours, the first one went bad. The replacement I received was sent by them. The tractor broke within the first hour of using it, so I was left without the ability to finish the project with our tractor! This has happened to me 3 times - the motor or the switch has broken and I could not finish.
I gave it 2 stars because customer service was okay. The pace is just a little The trouble with these items is that they are not very reliable. **Answer the following The update is I used it for just under a year, and it broke after less than 30 hours. There was a tear in the sleeve surrounding the extending tip. My guess is that it wouldn't have coped with what I was trying to do. You will need something that is significantly stronger and has 1/2" ends if you plan to mount an actuator on a garden tractor sleeve hitch to work with ground-engagement implements. A force of 20 pounds can simply not be achieved through any of the 1/4" holes or the locking clips.
It was a very well-made product with a full complement of steel gears, well-lubricated, and properly fitted. They are well worth the money. Additionally, includes end limit switches that are properly wired to protect the travels at the end. The enclosure is made of robust steel and the mounting brackets are rigid. It is provided with one directional switch with well-labeled controls, but it is a little large and would probably be suited for a light industrial environment.
THE USE OF THIS APP DOES WORK THERE WAS A 3 POINT HITCH ON A GARDEN TRACTOR THAT I USE IT FOR. The switch that was sent was the wrong switch, so make sure that you order it with the switch that you need.
Use this for deflecting snow from the chute of a snowblower with no need to worry about finding a switch or mounting hardware (they're all included).
The engine is very loud under load and has a slight oil leak, but as far as build quality goes, it seems to be fine. Designed to be used on aquarium canopy lifts.
These guys are phenomenal. was unsure of how to handle a minor issue, and the staff talked me through it very patiently. My answers stayed with me throughout the entire conversation, no going back and forth over the same ones. An actuator of this quality is very well constructed, with steel gears, heavy wire, and Thank you for your service and look forward to years of wonderful.
The tent system weighs about 150 pounds. I was The battery is only used for very short periods of time. Switches for up and down work well and are robust.
Some of the chips and scratches on metal and plastic appear to be Have not tested whether it works yet. The box it came in looks fine.