PROGRESSIVE AUTOMATIONS 12V Industrial Linear Electric Actuator. 2 in. 330 lbs. Stainless Steel Rod, High Force, Brushed DC Motor, Durable Stroke for Marine, Automation, Robotics PA-09-2-330
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It consists of four parts An actuator with 330 designation comes with a wire length of 40 inches and a connector made up of two pins molex. Alternatively, you can just cut the tip of the cable off and expose the 2 wire leads, and then splice or solder your own extra wires to the original cable to extend its Whenever you cut less than 1 inch of the original wire, it does not void the warranty as long as the original cable is still within 39 inches.
Good morning, I would like to mention that this unit has an IP65 rating. Water can be splashed on it without destroying it. A problem is likely if the unit is exposed directly to the elements or if the rod is wet at the time of retraction and extension. Despite the shaft's waterproofing, water can still seep in. I appreciate your time and consideration
On the actuator, there are only 2 leads! An electrical switch known as a Double Pull Double Throw Momentary Rocker Switch is required to complete the task. On one end of the rocker switch, the leads will be reversed so that it will pull the actuator out again.
It consists of four parts Actuators of the 330 series operate by extending from a voltage input of +12VDC and retracting from a voltage input of -12VDC An input voltage of 12 VDC is required. If no power is supplied to the actuator, it will stop and remain in the last position it was in before power was cut.
Selected User Reviews For PROGRESSIVE AUTOMATIONS 12V Industrial Linear Electric Actuator. 2 in. 330 lbs. Stainless Steel Rod, High Force, Brushed DC Motor, Durable Stroke for Marine, Automation, Robotics PA-09-2-330
It's what I added to my 30hp outboard on my pontoon so that I could have power steering and tilt, as when I first got it, it was missing. There is very little figure to this actuator, but its force is plenty. Along with the relay wiring kit, I also ordered the mounting bracket for it to be mounted on the transom. No more manually lifting the engine when loading a boat in shallow areas or when loading the engine.
I've just got to find a good reason to use it, or it will just sit on my shelf.
It is used to lift and adjust a custom bed frame. It can handle extremely heavy items. It took me no time to connect two actuators -- they are almost identical in speed.
The actuator worked This is what I used to replace the factory hatch on my boat. The device has been in for just over a month now, and I have yet to notice any problems.
This actuator appears to be well built and feels solid to the touch. The purchase was for the purpose of tilting the skid steer snowblower chute head. It runs a little slow, but overall it meets the application. A test is going to be conducted on weather rating.
The items are well made and of high quality. I can not recommend it.
It is a very good price for good quality, easy to install, and it works perfectly.
The actuator worked perfectly right out of the A UTV snow plow was modified by adding a power angle to it. The system has aided us in three snow storms thus far, one of them was considerable. We received our order in much less time than we were told at the I would recommend it.
Related Products For PROGRESSIVE AUTOMATIONS 12V Industrial Linear Electric Actuator. 2 in. 330 lbs. Stainless Steel Rod, High Force, Brushed DC Motor, Durable Stroke for Marine, Automation, Robotics PA-09-2-330
