PROGRESSIVE AUTOMATIONS 12V High Force (2000 lbs. / 1 in.) Linear Actuator.IP 65 Protection for Industrial, Agriculture Usage. Brushed DC Electric Motor and Stainless-Steel Stroke. Model PA-17-1-2000
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Thank you for your interest. About 20 Amps at I appreciate your time and consideration
Yes, it does exist. It consists of four parts With the 17 you get an integrated slip clutch that engages when you apply loads greater than 2000 lbs.
There are metal gears within the sealed gear box, and there is a threaded worm gear attached to the body A shaft that can be extended and retracted with a few clicks and has a max and min limit switch.
Dear, Yes, the unit is designed to pull and push 2000LBS both at extension and retraction. Thank you for your question.
Selected User Reviews For PROGRESSIVE AUTOMATIONS 12V High Force (2000 lbs. / 1 in.) Linear Actuator.IP 65 Protection for Industrial, Agriculture Usage. Brushed DC Electric Motor and Stainless-Steel Stroke. Model PA-17-1-2000
In a nutshell, The whole thing went together smoothly and so far works well. It will be interesting to see how it works.
First tried it to open and close a mechanical door and it worked fine. During the first couple of hours, the actuator cycled in and out (very slowly) and was working fine. After about 2 hours and a couple of cycles, the rod bent and the 300 dollars were thrown away.
Based on the data in this report I have a 2016 John Deere TS 2x4 Gator that fits perfectly in the 2000 bhp class. It was the limit switch that was the most challenging to adjust. If it doesn't work the first time, watch the YouTube video again. Set the limit a couple of times to make sure it works. Those teeth are what hold the small limit wheel in place. Changing it by 1 tooth will mean moving it by It is likely that only the max limit needs to be adjusted, and the top wheel is the max limit. I really like this product, it saves me a lot of time and effort.
On a custom-fabricated motorcycle lift with an aluminum frame that's extremely strong, this is used. There is a total weight of The machine was no longer functional (burned out) after 30 days and.
I love it! The deck has a drawbridge that I built. We just couldn't get it done with any other brand of actuator. It is essential that you use a 24 volt power source!.
It is nice. I am using it on a sleeve hitch for an ATV blade with a heavy duty application. In addition to holding the blade firmly against the ground, it could lift my ATV so it was no longer attached to the ground. The best money I've ever spent!.
If mounted upside down, the pa 17 with a 8in stroke and 1/2 in holes will fit perfectly into a mid-size ranger dump box for a 2019 570. You will need to remove the two pins from the factory tilt strut and reuse them to install it on the pan 17. If you want, you can hook up your 12v through a heavy duty switch or, if you want to save 25 bucks, you can use a solenoid controlled by a switch like I You can adjust the limit switches to get just the right amount of control over the stopping point of your unit. I really like the way it works.
The strength of the gun against the gator is probably equal to what's on there, but it's rated higher than how it's rated on the gator.