XiKe 4 Pcs 6203-2RS Double Rubber Seal Bearings 17x40x12mm, Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings.
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is a mistake on the peer that it's 120mm, if it's the same size, it will work, it's a sealed bearing and it does work, with that said, the peer is available, so I suppose it makes sense to use that.
Selected User Reviews For XiKe 4 Pcs 6203-2RS Double Rubber Seal Bearings 17x40x12mm, Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings.
When we started it up this summer, the old one started making a terrible sound. To remove the old one from the shaft, I used some bearing pullers and a rubber mallet, and to install this new one, I used a board and a rubber mallet. The situation has remained quiet for the last three weeks. As mentioned by other reviewers, I removed the dust cover and added some wheel bearing grease to it before I installed Since I had already opened it, I figured a little more wouldn't do any harm. There was already a small amount inside already, and it might have been fine. I chose to buy the four pack with the right price, so I now have three spares.
Our granddaughter is going to have a new cradle made for her. I needed some bearings for it. I have not finished it yet, but I did a 'dry run' with the bearings and they seem to work great for my application. The oak cradle is very heavy (with the baby), and it has been tested to support and rock with pretty much all of my weight when a bar is placed between two tables, and one bearing on either side. The last thing I wanted was for the bearings to collapse. Considering I weigh 200 pounds and can stand and rock without so much as a hiccup, these shoes should be able to handle.
The bearing was used to rebuild an idler pulley on a supercharger for a After only 75 miles of use, oil was flowing from the seals of the bearing. Replacing the bearing with an NSK with known specifications will do the trick. In a low-traffic environment like a beach, the Xike might do fine Applications that run under RPM. We would like the specifications on the bearings if the company can provide them.
It is the top bearing. The next day delivery made it so I had to wait two days for the order to arrive. Rain was coming down hard as I hurried to beat it. There was no such thing as that. It didn't matter how they sat in the towers - they were snugly fit. Due to place grease zerks on the spindle towers, I have removed the inner shields so that the towers can be greased properly. I will update this post if they make it through the season. This lawn tractor is a Sears Craftsman YTL2000 lawn tractor with a 42-inch deck that was produced in 2008.
I have a Z246 that fits these. Note that the lower bearings are pressed into the lower housing if you have the same model. Depending on how the lower bearing or shaft is removed, you'll either have to press out the bearing If you want to install and remove it easier, apply a thin coating of silicone on the outside diameter. As well, these bearings contain sealed elements. Make sure the seal cover is off one side if you wish to grease them It is possible.
My 2000 Ford Ranger 3 was squealing because the idler and tensioner pulley bearings were worn out, so I used these bearings to replace them. Before installing, I pulled the grease seal and added a thick layer of grease to both. In all cases, the fit was the same as it was in Now that the bearings are new, the truck is nice and quiet, whereas it was making noise prior. In the afternoon, around For about 5 dollars instead of purchasing a new idler and tensioner for about 50 dollars each, I fixed my problem instead of buying them.
Grease should be included with a sealed bearing. It was apparent that only two out of the four bearings had grease, which was clear & sweet tasting This is not bearing grease, it is thin. It is likely that even greased bearings would fail prematurely as a result of lack/absence of Repacking the seals with bearing grease was necessary after removing them. As far as I can tell, there are no other issues. The quality of what you get depends on the price.
You can purchase these for 00.