Timken 6203-2RSC3 6203-2RS Deep Groove Ball Bearing 17x40x12mm
Score By Feature
OveReview Final Score
Questions & Answers
The bearings were advertised as being made in the US, but they are not marked as such on either the bearing box or on the bearing itself. On the bearing, however, it is marked Timken.
Grease for electric motor bearings that can be used between -80 degrees F and +120 degrees F Temperatures range from 29°C to 177°C. When Timken deep groove ball bearings are tested with independent electric motors, independent tests reveal a lower vibration level than competitors.
In short, yes. There is a - In the bearing industry, “2RS” is code for dual sealing.
Comparing the measurements of your existing bearings to those of these bearings is an excellent way to check for accuracy. This is the The bearing has a diameter of This is in reference to both the I. (575"). A 17mm (0.) shaft is used for the bearing. In the bottom of the bearing the length is 24 mm (15.62") and the width This is 472. There are two seals on either side of the bearing. Prying the seal out of your bearings is a good option if your bearings have an open side to allow greasing from a grease zerk. The best help I can give you is to use the bearings that you already have since I do not know what they are.
Selected User Reviews For Timken 6203-2RSC3 6203-2RS Deep Groove Ball Bearing 17x40x12mm
What a fool I am! My bearings came from China, as I discovered when I received them. If I had chosen another bearing without the Timken name, I would have paid just one-half of the price Only a third of.
I have no idea where this came from. When you consider Timken's origin in the United States as well as its headquarters in North Canton, Ohio, you can see it as a USA-based brand "American Brand" is said to be the bearing's manufacturer. So, it makes no sense to know where it is made. In the case of The 2RSC3 can be found at 6203 When the 2RS bearing arrived, neither the box nor wrapper, nor the bearing, had any indication of its In addition to my last order from Texas Cargo on Amazon, I also ordered a Timken 6203 on Amazon This bearing measures 17mm x 40mm x 12mm and is made in the United States. While the packaging for these bearings was nearly identical, the "wrapper" was a little more substantial and the bearing itself was marked "USA".
It is hard to believe this is made in China but I ordered them from Timken, a big company that makes a lot of bearings. I paid more for these, and they claimed they were made in China. It'll be a long time before I'll get the ones made in Japan again because they're the best. They're in the pool motor so we'll see how long they last. The OEM bearings were NSK and lasted five Those are the ones I should have bought.
The spindle bearings were purchased to repair the cutting blades on my John Deere Ride mower, 48'' deck, 3 cutting blades. The factory bearings were not very durable even when they were lubricated regularly. This product has lasted two times as long as it should and it is still going today. Until you make a real comparison, you will never know if you are getting what you pay for. It's rusty.
There were two broken pulleys and a faulty tensioner on my 2004/2005 F150. The bearings in the pulleys were replaced and I saved a tremendous amount of money. As always, Timken has done great for me, and they have been doing well for five months now.
My Poulan Pro weed eater's front hub is damaged and I purchased three replacement bearings to upgrade and repair it. Six203zz 6203ZZ bearings were defective as a result of a leak in the metal shield. A rubber boot (6203-) has been attached to the new bearings Two-way radio system. have a perfect fit and I hope that they will last for a long time. As far as I can tell, the original bearings will not.
Thank you! I made an attempt to save money by purchasing bearings from Several weeks after I bought my pool pump, it froze up and failed. It'd be a wise decision for me to continue working with Timken and pay more money.
When I noticed the blade was wobbling, I realized it was a broken part. It turned out that the old bearings were torn up when I took it apart. The bearings in our bearing holder have been replaced with these replacement bearings and the holder runs like new. In the event that the bearings fail prematurely, I will update this review.