HGMZZQ 60/40 Tin Lead Solder Wire with Rosin for Electrical Soldering 0.023 inch(0.6mm-0.22lbs)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The answer to this is yes. Instead, it would be better to use solid solder and liquid rosin that is water soluble. It would be more ridged if it was 50/50. Here's my take on it.
A total of 12 meters (470 inches) length is observed.
With this solder, I used basic flux paste and it worked fine.
Tin the battery with just enough heat to get the solder to flow to the battery, and tin the leads, when you are soldering batteries. This ensures the battery does not get damaged by excessive heat. Once the battery has cooled, place the wire on the tinned battery and heat up just enough to attach the wire to The battery needs to cool completely before the second lead is soldered. Having learned that the hard way, I want to share it with you.
Selected User Reviews For HGMZZQ 60/40 Tin Lead Solder Wire with Rosin for Electrical Soldering 0.023 inch(0.6mm-0.22lbs)
Is easy to melt, wets well and holds its shape. It tends to build up slag and may require cleaning its tip more frequently than more expensive solders. Lacks one star because it tends to build up slag. I think the overall performance was excellent.
The truth be told, I am a solder novice. I can tell you this solder melts very quickly and uniformly. When I wrapped a piece of it around my brand new soldering iron, it melted very nicely and uniformly tinned the tip just like watching a video on YouTube! There is a very fine gauge solder that has a number of uses, such as for the soldering of small components to PCBs. The ratio of lead to tin is 60/40 and is much easier to work with than other types, especially since the non-coated types are much easier to handle Components made of tin or lead require more heat and time to work with, and this can lead to heat damage.
It is a good size for hobbyists who spend a lot of time doing both. I use up about 2 or 3 pounds of each each year. . I am 011. Generally, I purchase this size of solder for my travel repair kit. This was the smaller roll. After testing this solder, it compares very well with Kester 60/40 brand. Kester brand was my original choice, but I decided to try this one instead. As I was filling the small plastic copper wick with solder for a smallest roll in my go kit, I realized I needed more solder for a few jobs than I had on hand. A 1 lb roll of solder is quite heavy for me to handle on some jobs. This is an excellent tool and I will use it to the end. Maybe I would buy it if there was a 1 lb roll available.
I would purchase It works great and is very.
What else do you expect, it's solder right?.
recently tried to use an imitation garbage item I had purchased recently from an auction site which turned out to be real garbage and almost destroyed my project. I literally thought I lost my sense of touch due to the situation. This product was recommended here on Amazon, so I bought it. You'll get a very professional result from this, it flows smoothly, shines nicely, and leaves no dust or residue behind. Only mistake I made was that I am a little dyslexic, so I ordered the wrong one. There are only 06 atoms in the universe, You might want to order a wire that is a little bit larger than what I ordered so please do not order what I ordered. In no uncertain terms, the is. There are not many that are smaller than size 6. It is for the very smallest of the fine solder joints on the surface mount technology board. I can still use it, but I wish I planned ahead to go an inch or two larger.
In addition to the spool, there is a total weight of The weight is 22 lb ), meaning you only get two per package. I received 0 ounces of solder, which amounts to 80% of what I was supposed to receive. The Vastar brand was exactly what I was expecting.
With over 50 years of experience in electronics, I'm an expert in this field. As far as solder is concerned, it isn't easy to mess up. Soldering smd components with it is my preferred method. When performing such work, it is best to keep the temperature low. Around 420 degrees F is the temperature I use. The flow is nice.