Pake Handling Tools Hydraulic Manual Scissor Lift Table - Sturdy and Durable Everyday Use Lift Table 500lbs Capacity

As you can see in the image, it was delivered in this condition. The package was damaged, so I took a chance and opened the package. After I cut through the straps on the package, the box fell apart. When I removed the item, I noticed both bolts were crossthreaded and must have been inserted with an By using a 12-inch socket and a 12-inch wrench I was able to remove the bolts I tried using an inch Cresent wrench, but it didn't work. The good news is that I was able to remove them with my impact gun, clean up the threads, and after several attempts was able to get them through the crossthreaded section of the handle and tighten them
In the box was a lever handle for the foot lever In fact, it was floating in the box along with a bunch of 1/8" plywood pieces used as parts of the shipping base, so it did not fall out. The unit was installed and tried to be raised by pumping it up - it wasn't very successful. In the end, it was a waste. When I lifted the table a few times, it simply went back down again Making sure the cable release was properly adjusted was part of my check. The next time I used the foot pump, it did not raise. After lifting the table several times and letting it fall, I tried again to use the foot pump, and it worked. After that, I raised the table with approximately 100 pounds on it (for safety concerns) and let it sit overnight. At no point did it drop or lower. In any case, I will keep the unit. If you are considering buying, know what you are getting into. I am updating My seller contacted me after I contacted him about a new unit, and offered a different price. They offered a partial credit and apologized for the condition of the unit I had received. I explained the problem I already have sorted out and they offered a partial credit. Having their products backed by a warranty is very comforting.

Anakin Reid

| May 10, 2021

The item arrived entirely assembled. The only thing left to do was attach the A great product. Just what I needed to move concrete art to various parts of the yard. I can raise urens and other art objects to the height of the pedestal and then lift them on the pedestal to be placed elsewhere in the yard. This product definitely deserves a recommendation.

Giuliana RAHMAN

| Dec 31, 2020

Until now, the lift table seems to work well and be of good quality. However, the packaging was in better condition. It arrived torn and dented, with several holes. However, UPS would not have been at fault if the box was not strong enough to handle a product that weighed only a little over 100 pounds. By putting 1/16" plywood around the inside to reinforcate, we simply made a joke out of it. As I picked up the box, I discovered that several pieces had fallen out. The table came together thanks to the fact that I found all the parts.

Adeline Fletcher

| Oct 29, 2020

An enclosure (at the handle end of a caster wheel) had been crushed. It took 90 minutes to remove, to repair with a 5-inch bench vise, big hammer, and pry bar, and to reattach the enclosure. As you can see, I think it is going to be alright now, but only because I had the tools, time, knowledge and physical strength to handle it. In order to raise a bed all the way up, 52 pumps are required. It looks durable enough, but if the pump lasts long it will be the real determining factor for how good the product.

Kaysen Franco

| Dec 28, 2020

Assembling this set was not terribly difficult for me, however, I had trouble figuring out how to assemble the pieces at first. It has been using this cart for a few months already before I could write a review (I am not handy person). My low back thanks you for that adjustable cart! whenever I remove stuff from my car, I can just raise the cart higher (same as the height of my back truck), and move everything to my cart, which decreases the chances of me hurting my The process is so much easier now! The handle needs not be complicated. It is important to release the handle slowly to avoid being surprised by the loud noise it makes when it is released.

Alec Woods

| Jul 21, 2021

Despite its home made appearance, the lift I received arrived in a It had a hole in the side, but it was covered with a piece of cardboard and a whole The table appeared to be fine after I disassembled it and put the handrail and foot pedal on. I was able to raise it, but it was almost impossible. There was a small gap followed by a stop. To bleed the piston, I followed the procedure in the manual. The hydraulic fluid doesn't seem to have been present at any time. In the manual there is no information on how to get support or contact the company. Returning it to you will be the best option for me. You don't have to worry, I'll use another roll of tape to seal the hole in the box and send it back to you.

Brynn Atkins

| Sep 17, 2020

We have been using this table daily for a little more than a year, and it is still running perfectly.

Briggs Smith

| Mar 09, 2021

I don't like the packaging. In addition to scratches, there were several scrapes on the product when it arrived. There are three on the table top, two on the corners, and a third As expected, there are a few scrapes and scratches on the cart after it has been used in a warehouse environment for some time. The condition of the item is essentially "used. ". This product would be returned if it was a consumer item.

From a functional perspective, it does its job. The tool will be used to move tools around the shop, as well as to clean and maintain This is the result of moving Additionally, if a piece of furniture is heavy, it must be moved with care.

Cyrus Dunlap

| Dec 29, 2020