Neodymium Disc Countersunk Hole Magnets, 1.26 inch x 0.2 inch Strong Permanent Rare Earth Magnets with Screws - Pack of 12
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Two bodies will hold more weight when they're side by side.
The front and back of all magnets have the same polarity, so the front of one attracts the back of the other. If they face each other, or are facing each other, they repel each other.
Drill these magnets but do not pierce them. Their ceramic surface is coated in nickel, so they will shatter.
Among the magnets are 12 powerful neodymium (Nd) magnets that come with a metric wood screw equivalent to a #8 x 3/4. With #6 and #10 flat head screws, I verified that the indent did not extend beyond the edge. There is no size difference between the three. There is no need to put the screw that came with the magnets in. For your project, you can use whatever screw size is needed, #6, #8, or #10. These 1. are the important items to remember. It has a size of 25" These powerful Nd magnets are 2" in diameter! In addition to its 12 kg (*25 lb) pull force, each magnet can support a 25 lb weight if it is not vertically pulled. It seems like there are lots of magnetic attractions. It's a nut that I'm using to attach a 4lb engineers hammer to a cast iron I-beam On a workbench, a beam is visible. With that heavy hammer, there was no movement at all.
Selected User Reviews For Neodymium Disc Countersunk Hole Magnets, 1.26 inch x 0.2 inch Strong Permanent Rare Earth Magnets with Screws - Pack of 12
They are designed to mount to the dash of my pickup so that I can hold my cell phone there. The back of my phone has a metal plate attached to it, which is very effective at clinging to a magnet, yet I have no trouble pulling my phone off the magnet. It has remained on the magnet even when I have driven down some of the country's most challenging roads, crossed over railroad tracks, etc. There is only one negative to the magnets the screws included. I'm using them quite a bit, but they have a little too large of a head for the top of the magnet to fit flush. While for many people the size of the screw will be insignificant, if you require full surface contact with the magnet, then you should use something a little smaller.
My goal has been to make a shot, but I've been unable to It has been years since I last tried skiing, but every time I give it a go, I have There's also the fact that most glues tend to deteriorate and look tacky over time, along with the fact you can't take the glasses off the ski for cleaning. In such a situation, gluing shot glasses to skis isn't the best idea. I was struggling to figure out how to fasten rubber gaskets firmly enough to hold the shot glasses to the skis. I had seen bars using rubber gaskets to hold shot glasses to skis, but I didn't know how to fasten them to the skis. The way I set it up also didn't look good so I didn't want to spend a lot of money. One technique some people use is to drill big holes in the ski so that the shot glasses can be inserted directly through it. This method is not appealing to me because I've seen glasses fall out and break, plus have you ever You must make sure that As of now, it has worked pretty well! Despite their relatively weak magnets, the glasses are held firmly down by the magnets. The ski is so stable that you can turn it upside down and shake it around, and the glasses do not move a bit. Cleaning the glasses is also easy since they can be easily removed. I also appreciate how clean and professional it looks. This is a brilliant idea, so why haven't we thought of it.
In addition, This is amazing! The 10 stars I would give them are well deserved. Here's a video to check out. I am sure Melanie is using a heavy pipe wrench through her. Stack of books. Those are what I bought for my boat to secure cushions. My initial plans called for recessing the magnets into the top of the seat and then recessing the second magnet in the back of the cushion. There is no need for that, I just have to attach a piece of metal to the back of the cushions in order to secure them underside up. Even though they secure them all through, you can still take them off and store them easily without having to use This is a 10 star review.
They're what I stick on walls to hang things, generally, and make things. When the latch on my pantry door failed after 35 years, I used one to keep it closed.
There was no adhesive that worked due to the moisture and heat that came I found the nails that came with the lights to be Therefore, I decided to use some magnets and super glue for a test. On the underside of the cabinet, I screwed the magnets, and the other magnets were glued All worked as intended, and the magnets held the lights in place even when the weather got hot and humid. This problem has been resolved!.
For instance, two of these were used to close a steel-framed stained glass window that I placed within a frame to allow it to be opened and closed for cleaning. With the center screw, it is held firmly in place. (Be careful not to tighten too tightly, as the earth magnet is somewhat brittle and will break if the pressure is too high. Very good at keeping the window shut.
In addition, they can also be used to mount a small handgun under cabinetry.
There is so much power in them. They have a countersunk hole and screws so that you can mount them on a wall with the screws flush and not obstructing the view of the tool. I picked these since they were 12 of them, and I wanted them for my utility room since they hold tools magnetically. I was surprised at how powerful they turned out to be. You can watch the video of a magnet jumping up from nearly 2 inches away in the video I posted. Having such a strong grip on them, it is impossible to dislodge them. As a result, I am able to hold any tool I place on them very easily. The screws didn't need to be used to mount them because I have an air handler in the utility room that provided a large metal surface that I could apply the magnets to, and then place the tools on top. This worked like a charm and was very easy to install. The non-metalized surfaces are coated with a metalized coating Although the corrosion-resistant plating is nice, I noticed that there were a couple of imperfections in the plating that created a tiny point that caused a prick to my fingers while the magnets squeezed my fingers strong as the separation occurred. Their power makes it imperative that you keep your fingers away from them to avoid pinching them. These magnets have overall been a great purchase for me.
Related Products For Neodymium Disc Countersunk Hole Magnets, 1.26 inch x 0.2 inch Strong Permanent Rare Earth Magnets with Screws - Pack of 12
