DIYMAG Neodymium Round Base Cup Magnet,60LBS Strong Rare Earth Magnets with Heavy Duty Countersunk Hole and Stainless Screws for Refrigerator Magnets,Office,Craft,etc-Dia 0.98 inch-Pack of 12
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Magnets with a diameter of 7/8" are used. Because they are smaller in diameter than the numerous 1, they are more common. On Amazon, you can find magnets with a 26" diameter. 3/16" thick is the thickness of the material. A bit smaller than 1/4" (definitely less than 1/4").
The screws I used (I used different lengths and pitched the supplied screws) were about 3/4" long. It is sufficient to use a standard flat head sheet metal screw or wood screw of #6 in size.
Outside would be my first choice if I didn't need to use indoor
On the face where the countersinks for the screws are, there is the magnetic side. feature countersunk holes for retaining flat screws for screws that are screwed into wood battens on a In addition to holding sheet metal artworks against a wall, I use these as well. Additionally, I countersink the round magnets into the wood, but not to a great depth that will interfere with any contact with the metal surfaces. For this purpose, they are strong and efficient. If they were put face to face, their magnetic faces would repel each other. To make shipping easier, they are all stacked in the same spot in a roll.
Selected User Reviews For DIYMAG Neodymium Round Base Cup Magnet,60LBS Strong Rare Earth Magnets with Heavy Duty Countersunk Hole and Stainless Screws for Refrigerator Magnets,Office,Craft,etc-Dia 0.98 inch-Pack of 12
Magnets cannot be separated in order to use them, which is what makes them so awful. It is the strongest magnets in the world that make these so attractive. In our case we used it to hold our jigsaw upside down while cutting on a table. Once I started using them for other purposes, I realized how versatile they were. I keep it around because it's very handy. Besides that, I have used them to hold plastic tablecloths on my large folding table with metal legs (and metal side frames), and they do a great job.
struggled for a long time to separate the steel cups from which they came. They are so strong then you have to slide them to the edge of the fridge in order to remove them without scratching our black refrigerator. My wife hates them because they are so strong that you have to slide them to the edge. Then, I am prohibited from using them on the refrigerator any more. They hold up flags in my work shop just as well as any I've ever used for such a size, though they're not as strong as some I have used.
There are some rounds as well as some bars that I bought. It is expected that the round ones will arrive yesterday and that the bars will There was no damage to any of them. There are no corrosive chemicals in the screws Metal with strong magnetic properties. The two of them are strong enough for one of them to do what I needed.
I purchased these in order to change from using the adhesive that a certain metal poster company sends with them in order to stick to the wall and hold it in place that has a magnetic surface on the other side. The adhesive is one-time usage, I cannot make a change from one spot to another, therefore I cannot move them from one spot to another as I wanted to. In order to remedy this, I instead looked into The medium metal poster, even if only one poster is used, would hold it Due to the fact that it's a circle, it does have a spin point so you have to balance it so it's In the ideal case, 2 would be used. For testing purposes, I hung it up to see how strong it would be. Magnets stick very well to metal, and I had to use an allen wrench to remove them from the metal poster so as not to damage the poster back. The total number of magnets ordered was 12. It appears to be a good batch, so I might order more while there is still some available.
I have other magnets from other brands, and this one is not as strong as the Although I will not use those for my project, my plan is to use them for something else instead. As well. Have I just noticed this product only works at 176 degrees Fahrenheit (80 degrees Celsius)? Unfortunately, I live in California and such a thing may not be suitable for outdoor use, especially if it's mounted on 210 degrees can be achieved by the surface of the car if it gets hot enough.
I might return this to you. In addition, I cannot like that only one side is magnetic while the other side is much less magnetic, as opposed to other magnets I have. The casing made of steel might be so thick that the magnet's strength might be greatly reduced when compared to other magnets I have. My favorite magnets are those that have an equal magnetic field on each side. The magnetic side of my work space is on a metallic wall, and if I add the not-magnetized side to that wall, the magnetic side will not work Since the sticky side of this product is on the wall, if I try to stick something on it, it will not hold what I am sticking to since the sticky side is facing me.
Our metal art is held firmly to the wall by these magnets. They are easy to screw in and easy to remove. By screwing the magnet directly into the wood frame, we were able to hang other canvases around his room by simply putting metal on the wall and screwing the magnet into the frame. We liked them so much we even used them for hanging another canvas around his room. Our kids are able to easily move their poster art around their rooms to display what they are interested in, due to the magnets. I recommend this book highly!.
To mount my camera on my tow vehicle's bumper and to mount it on the back of my RV, I used them. In this way, I can simply take the cameras off the mount whenever I am not using them. I am very pleased with this. Additionally, I use it to keep metal objects in my camper from moving while I am.
pieces of metal used in the grid are ferrous (magnets can attract them). Lights that I use (are very bright, but they're Attaching these 3 lights to a 3" wide plank of white pine, then screwing in two of these magnets at the end points, keeps them in place fine. Even if you use one light and one inch wide, eight inch long square stick, the device still works. There is nothing easier than placing it with the help of this.
In addition, The product arrived within a short period of time, as promised. For an extra hold, used to adhere wall mirrors to the wall. You'll need to determine the measurements and nail the magnets to the wall, line up the mirror frame on the wall and nail it to it. My magnets didn't line up perfectly, but they still connected. It is mounted at the bottom on two black sliding barn door floor guides that are adjustable. The mirror frame is nailed to the wall, and the guide is adjusted to match the depth of the mirror frame. Once the mirror is in place, the magnets hold it in place. The back side of the panel would have two sets of magnets, one in the middle and one Hopefully, this will be of some help to you.