BangaRang Condensate Neutralizer 220,000 btu 15''x2.5'' Fittings 3/4''
Score By Feature
OveReview Final Score
Questions & Answers
There are about 15" in length of the unit, not including the fittings, and the diameter of the clear plastic tube is about 2 1/2". There was a 5/8" I on it. A fitting at each end serves as an outlet and an inlet. The I needed to be replaced with a 1/2" one. An I-section with a 5-/8" barb on one end and a barbed end on the other. In my installation, the threaded end fitting was broken, but I was able to buy a replacement fitting for low cost
There is a middle out the top if you look in the bottom
A charge meant to clean the amount of water utilized for that time/rate would not result in an issue with flow. Inspecting the tank might be a problem depending on the area involved.
Center section is made of clear plastic and has a diameter of about 2 1/2". Approximately 2 3/4" high and 2 3/4" wide are the two white plastic end sections. There are tube attachments at each end, and it measures about 14 1/2" long without the tubes. Due to the fact that mine is now installed in my crawl space, it is difficult to get exact measurements, but what you have there probably is good enough for you.
Selected User Reviews For BangaRang Condensate Neutralizer 220,000 btu 15''x2.5'' Fittings 3/4''
Initially, I was somewhat concerned (probably more than I should have been) about the fact that the only thing that went down the drain was the condensate from the condensing furnace I installed. When I tested the PH of the furnace drain, it was a 5, so I concluded that this was a normal value. BangaRang was successfully installed, and now my phone is Purchasing this item has definitely been a pleasant experience for me. It's a good thing they included hanging straps as well, but they can break easily so be careful when hanging them. I added a schedule 40 PVC union (not included) on the inlet side of the neutralizer to make removal easier when it comes time to replace the It also came with two threaded male adapters that are able to connect a neutralizer to a standard 3/4" PVC hose and barbed fittings if you decide to use vinyl tubing instead of PVC.
I have updated The seller promised to send me some fresh neutralizing media, and I am hopeful that it will fix The customer service was excellent, as these (or other items) do not appear to be fancy contraptions, so there is no reason for this. I was originally a fan of As far as my high efficiency furnace goes, I selected the right model. When pH reached 5, it was a sign that the reaction was complete. The day began at 5 and ended at 5 today. In spite of the fact that the pH was not above 6 on day 1, there was no harm done. My suspicion is that there is something wrong with the limestone. It would not be recommended. You will need to replace the media in your phone after barely a month if you don't buy a name brand.
I love how well it works and how cheap it is. I have been using it for just over a year now, and it works perfectly. pH level of 6 for treated water discharging from treatment plant.
The quality is excellent, but it would be great if there were mounting brackets included.
With its ability to refill media, this neutralizer offers an efficient way to disinfect non-combustible surfaces Tankless water heaters are available at a fair price for businesses.
All that's needed is a few pieces of plastic and a clear tube to hold the I would not recommend spending $60 on this. The installation is also easy to remove and recharge because there are no unions. The $5 each had to be bought. Except for the lack of scalability, the program works fine. I think $25 would have been a reasonable price.
It seemed that this was the best deal after considering all the options. My existing condition required that I fit a 1/2" ID screw into a 1/2" ID hose connection, and a 1/2" ID screw into a 3/8" ID hose connection. It was straightforward to set up and I found it easy. A neutralizer rock can be replaced after a heating season by unscrewing one of the ends.
It works well, but the wall holder is too cheaply made. It is advisable to use washers on the screws, or you will have trouble removing the canister if you do not.