American Educational Clear Borosilicate Glass 1000mL Bomex Filtering Flask
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
You can use any stopper with a number 10 thread. Don't let your head get too heavy, but be careful not to overdo it. The finnel must be smaller than the flask otherwise there might be a problem
It WILL NOT fit if it is 1/4 inch thick! I am back to buy more since I estimate it is 3/8 inch.
Any size up to 8 inches is suitable, but you need to purchase a set of rubber stoppers to complete the project. The Laboy ASP100001 Pluro Stopper Set Rubber Adapter for Filter or Buchner Funnel Set of 7 by LABOY is priced at $15
Selected User Reviews For American Educational Clear Borosilicate Glass 1000mL Bomex Filtering Flask
The diameter should be 75 mm or less. This pipe has a length of 27 inches and a major diameter of 9 mm. This fish was 35 inches in length, and heavier at the 4th barb (closest to the neck) with 10 barbs. The thickness of the wire is 9 millimeters or less. There are 43 inches in the picture.
2 of these flasks, both of which came branded as BOMEX 1 liter flasks, both of which I have used repeatedly. In terms of quality, it is thick and consistent. There is good construction on the rim and the side arm. In my experience, I have used these under substantial heating conditions, high vacuum, strong chemicals, etc. Therefore, the markings may not be accurate but remember that they are for estimation purposes For the low price and reasonable quality, there is a trade-off that the size of one flask varies significantly from another over time. There is a lot of variation in the height of the flask. Generally, I would say that these are a pleasure to work with, they're high quality, great value, and you don't have to worry about them getting cracked. You should also be careful not to bump other glasses with them if you do, the other glassware will likely be broken and not the The following photos can be used as a This flask has a diameter of 0. Since the red nipple protector is attached, the flask By approximately 9 inches, you are 280 inches taller than you were before. In addition to being 250" taller than the one with a yellow nipple protector, it has a deviation (out of roundness) to the inside of the neck that is about The number 13". It has less than 0 in the flask with yellow protectors. Glass is 0. 002" out of round inside the neck, but there is a near-microscopic void at the neck near the end of the glass. There are 1 to 1-1. 75 mm in diameter in the inner neck. The number 689 is equal to one. From 666 grams to 744 inches, they weigh between 666 and 744 grams. The total weight was 672 grams. comparison, their weight is more than twice as much as that of a typical 1L Karter brand. 325 grams make up the weight of this flask. A side arm with an outside diameter of 0 is shown. 393. 3" at the height of the first barb, and 0" at the height of the second barb. A height of 450" can be seen at the final barb on the fourth A shallow flask with a base that measures approximately 5 inches wide is roughly the diameter of the flask at its widest point. A flask with five inches of side arms will be by far heavier than a flask with ten inches of side arms. This can help some of you, I hope. It is a great investment, without a doubt!.
The product is inexpensive and of good quality. When I got it, it was shipped in a standard Amazon box with a few other items wrapped in bubble wrap and tape, but that's it. No box, no nothing. initially very concerned that I would open it and discover chipped glass or a broken hose stem, but upon unwrapping, I was pleased to discover that there was nothing to worry about since this particular model is very sturdy. Overall, the glass is pretty thick and reinforced on top as well as the stem of the hose, which Even so, I think it could have had better packaging just in case, but it seems unlikely they could be broken without some serious force and a strong intention to do so, Considering that the item cost only around $20, I was very surprised at the quality. I found the glass to be very clear with no I'm very happy with this purchase. In any case, I'm happy enough to actually get off my behind and write a review, which I rarely As soon as I need something like this again, I'll buy it again.
There is a section that says they take #6 stoppers, but standard 1000mL side-arm flasks from other manufacturers take #8 stoppers (what I purchased), and another place in the description says they take #10. Since the #8 stoppers I bought were way too small, I assume the #10 stoppers will fit instead, at least for the ones I got. I think they are selling flasks with different mouth sizes under the same product description, based on previous reviews. Luckily, there are no issues with the flask itself, but there is indication that there are problems with the.
Although I was expecting it to feel like my economy-grade flask of similar size, I was pleasantly surprised to see it had some heft to it and nice thick, even Good that it seems to be able to withstand a prolonged beating from a vacuum during filtration.
I have purchased two of these flasks. They need to be topped with It fits one, but the other requires a smaller stopper due to its narrower size.
I really liked these and they worked well too! A high level of quality in the work with glass.
The flask is extra heavy with a nice thick wall.