Uxcell universal Aceite resistente al agua de refrigeración Bomba Sello mecánico 30 x 52 x 10 mm

$ 8.47

Score By Feature

Based on 31 ratings

Value for money

8.93

Giftable

9.23

Customer service

8.93

Satisfaction

8.96

OveReview Final Score

How Our Score Is Calculated

Product Description

Be sure to enter the right model number when you enter yours.

A Spring Water Seal is made of rubber and named after the spring it seals.

The diameter of the outer rim is approximately 52mm. Inner diameter (approx) 30mm / 1.05" Outside diameter (approx) 30mm / 1.05" The 18-inch range

The width of the part (approx) is 10mm. The garment measures 39" the color is black

The net weight of this product is 9 grams

There are 1 x Spring Water Seals in the package

Questions & Answers

How thick are these springs, and do they come with the thin circular spring that goes inside (and around the axel)?

Since the bearings are non-spring, there is no need for

Is this seal suitable for a 4x8 harbor freight trailer with a 5x4 tow vehicle? A 25 mm axle, with bearings 30205, is on the five hubs. ?

The 30205 Bearings and these bearings were purchased by me for my Harbor Freight boat trailer after my local napa dealer told me there were no bearings left, and that new hub assemblies were the only bet.

I'm wondering if this seal will fit the harbor freight The capacity is 1090 lb for 40-inch wheels Can you give me the item # 62665 and item # 62645, each 1/2 inch by 48 inches with 12 inch wheels?

If it fits this application, it should work. As a spare tire for my trailer, I have a 12inch harbor freight tire. The size should be right.

I know the Harbor Freight seal comes with a thin circular spring located between its inside and its bearing. Does this Sears seal come with a spring too?

I used the seal to replace the Harbor Freight trailer seal, and it worked well. Remember that two seals are needed per side (one inner and one

Selected User Reviews For Uxcell universal Aceite resistente al agua de refrigeración Bomba Sello mecánico 30 x 52 x 10 mm

This Trailer is Not Compatible With Older Harbor Fright Folding Trailers from the 1980s

5/5

It is possible the Harbor Fright Haul will not fit These folding trailers are manufactured by Master. Old trailer I received in early 1990s probably dated from the 1980s and was most likely purchased and assembled during that time. Four lugs on the hub and a highly recommended 30mm rim give this bike a solid construction As a result, it could not be adapted to the old hub because of its diameter. There are 3 L44649 bearings and races on this hub, but it needs 1 in order to work. The size of this sheet is 98"x This seal has a double lip size of 249". There are many places where you can find them. The first option is an option. The size of this sheet is 98"x 25" in length. In spite of the fact that it did not fit my application, I give this bearing a five because it is well made, of reasonable cost, and it was.

Dax Colling

| May 14, 2021

Choosing harbor freight trailers as a replacement should be a good decision

4/5

Everything seems to be going well. I felt that it fit well. When my Harbor Freight 4x8 folding trailer began to leak grease after hauling in hot weather, it needed to be overhauled. Those and some bearing buddies (suppliers) seemed like a good idea to me.

Thatcher GIBBONS

| Sep 20, 2020

The fix is easy - Keep the details in mind! There was a problem with an inner bearing on the The joint is corroded and has no grease on it

5/5

In order to make the seal seat properly, the boss on the spindle where the inside diameter of the seal is located was badly corroded, and had to be ground down to smooth a smooth surface. We applied some Permatex to the area (in order to remove the pitted spindle seal) before refitting the hub assembly with new seals and bearings My husband and I are amazed at how fast and reliable the parts available on Amazon are.

Lana Mathis

| Mar 27, 2021

This is the right hub for my HF trailer

4/5

I have not had any problems despite thousands of miles of travel.

Skyla Gordon

| May 05, 2021

The perfect choice for a Harbor Freight boat trailer

5/5

It is a replacement for the factory seals in my Harbor Freight 600 lb. truck. When initially installing the trailer, I damaged it. I had to purchase a larger capacity trailer. It was the perfect fit. It will be superior to the original seals, which may prove to be less durable in the long run.

Dominick Barnes

| Jun 26, 2021

I have a Harbor Freight trailer that fits this

5/5

The product was as I would order from them I have a Harbor Freight trailer that fits this. Bearings and seals were replaced with factory parts.

Lawrence Barron

| May 09, 2021

Tags that will work well for Habor Freight Wheel bearings are also repacked along with the wheel

5/5

A tag for Harbor Freight- With an axle diameter of 25mm, the Along trailer is equipped. If you are repacking your axle bearings, you will need this seal. The product is well made and appears to work well.