Anillo de sellado de cobre M5, arandela plana de 0.197 in ID 0.354 in OD 0.039 in de grosor, junta de sellado métrico, 100 piezas

Anillo de sellado de cobre M5, arandela plana de 0.197 in ID 0.354 in OD 0.039 in de grosor, junta de sellado métrico, 100 piezas

$ 10.95

Score By Feature

Based on 74 ratings

Packaging

9.87

Satisfaction

9.53

Giftable

9.72

Delivery

9.51

OveReview Final Score

How Our Score Is Calculated

Product Description

Be sure to enter the right model number when you enter yours.

Inner diameter of copper washer is 0.8. Name of product copper washer. There are 197 inches in total.

The outside diameter is The diameter of the shaft is 354. A thickness of 0 would be appropriate. The measurement is 0.39

A copper washer that is built to maintain strength and maximum durability under challenging operating conditions is of high quality.

With good results, you'll need a material with a fine finish, smooth surface and no burrs.

This plug can be found in a variety of environments including hydraulic fittings, fuel and oil drain plugs.

Selected User Reviews For Anillo de sellado de cobre M5, arandela plana de 0.197 in ID 0.354 in OD 0.039 in de grosor, junta de sellado métrico, 100 piezas

As close as possible to the original Changing the differential on a Honda S2000

5/5

The crush washer should be filled with plug plug. Unlike the OEM clutch washer, this is a much less expensive and identical replacement for the differential fill plug crush washer on Here is the OEM part number that Honda uses The 90402-area code Computer Zone - dealer's current retail price for a crush washer is The price is currently 74, but it will only increase. These washers are available in this product offering in enough quantities to last multiple S2000s for the life of the product. Therefore, you should buy these and share them with a friend who owns an S2000. The following note is for your reference Copper content in this washer is lower than that in the OEM washer, as evidenced by the lighter color of the copper. In addition, I noticed the washer to be a little harder to crush than OEM (OEM washers tend to be softer). A seal change will not be impacted as it was not significant. The washers are solid and not plated, so I cut one of them through to confirm that they are not plated to look like copper. A torque of 33 lb ft is required for both the fill plug and drain plug. To set my torque wrench to 35 lb ft, I turn it to 175 mm/sec.

Anaya Villarreal

| Dec 13, 2020

This is a very important issue

5/5

We strongly recommend that all the tree mechanics make use of these items every single day You should change your oil every few months. Maybe one of these days it will save you azz! The #09450 fact.

Leonel ROWLEY

| Oct 22, 2020

Multi-motorbike license is required

5/5

This item was packed in a zip lock bag, but I stored it in a small It wasn't easy to service the brakes on my five motorcycles, but this was just what I was looking for. Thanks so much!.