(Pack of 10) 2 3/8" (60 MM) OD Square Plastic Plugs 6-10 Ga ((for ID 1.902" to 2.094") | Flexible Ridges n Side Walls | Heavy Duty Impact Resistant ¼” Thick Top | by SBD
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Your square tubing 10/14 ga ie (is too thin. The number 140. A) Wall Thickness 078 mm
You are probably referring to a 2 1/4 inch OD tube, and if that is right, you need to buy a 2 1/4 inch
Neither I nor my colleagues see any reason for not doing it. A light grit sand paper will be adequate for the prep, and a quality primer should do the trick.
That's a given. Make sure you use a good primer on the plastic.
Selected User Reviews For (Pack of 10) 2 3/8" (60 MM) OD Square Plastic Plugs 6-10 Ga ((for ID 1.902" to 2.094") | Flexible Ridges n Side Walls | Heavy Duty Impact Resistant ¼” Thick Top | by SBD
The parts on the corner ends of my Kubota bed began to disappear. I didn't think it was snug at all as I wore it. The ones I came up with came from a little measuring when I did not find an official Kubota part. There are a lot of "fins" on them and they are a really snug fit that requires some pressure to get them in place. It's unlikely that they will be releasing new music on their own any time As well as looking good, they are really well constructed. An empty square tube end is far better than an empty round.
About 120 feet of aluminum fence not only missed inserts on top of the posts, but also had dozens of square posts of both sizes lacking them. There must have been some reason why the fence installer left them bare. They arrived promptly (both sizes) and were easy to install. All they needed was some tapping with a rubber mallet to tighten them up. I love the way they look and match the original caps perfectly.
They were purchased to replace poorly fitting caps on a brand new BigTex dump trailer which had already suffered damage even before they were removed for a LineX spray-on finish. There is no need to remove the bedliner. They fit perfectly and even look better than what I expected since they are made from metal. It finishes off the project beautifully with a glossy finish and fits tightly to prevent ribs from bending or distorting. I would recommend these to anyone who wants a high quality product to complete.
It is a pleasant surprise how well these plastic plugs fit thin wall tubing. They add an elegant touch to my project.
For my climbing sticks, I used these as plugs for the ends of square tubing.
Sorry I cannot rate it. A mistake led to the order being incorrectly sized.