PneumaticPlus SAR400-N04BG Compressed Air Pressure Regulator 1/2

PneumaticPlus SAR400-N04BG Compressed Air Pressure Regulator 1/2" NPT - Bracket, Gauge

$ 42.99

Score By Feature

Based on 28 ratings

Easy to install

7.31

Value for money

7.27

OveReview Final Score

How Our Score Is Calculated

Product Description

Size of port is 1/2" NPT, and flowing rate is 211 SCFM at 90 PSI.

The standard locking knob is of the relieving type

It can be. A maximum pressure of 250 PSI is required. A pressure range of 0-150 PSI is recommended

The kit also contains a gauge rated for 0 to 160 PSI and a bracket

A manufacturer's warranty of one year is provided on this product made

Questions & Answers

If the adjustment knob is mounted on top, can this be mounted. ?

It is possible for the adjustment knob to be located On the other hand, this will change the flow direction from left to right to right to left (there is an arrow located on the front of the knob showing which direction the water will flow). It is necessary to rotate the regulator 180 degrees to ensure that the back of the device is facing forward in order to keep the same flow direction when the adjustment knob is on top. When you move the gauge port block to the new front side (only loosen or tighten the gauge port block screws by hand), you can begin mounting the gauge.

Selected User Reviews For PneumaticPlus SAR400-N04BG Compressed Air Pressure Regulator 1/2" NPT - Bracket, Gauge

I have been buying regulators from Pneumatic Plus for the past two years, and this is the second one I've purchased

5/5

Both regulators have been very helpful. It looks like they are well made and give off a heavy duty feel. It was found that the pressure gauges were pretty accurate after they were installed. For someone who is just a hobbyist and an amateur bike builder, it would be impossible to justify spending hundreds of dollars on a top-of-the-line regulator. For my 60 gallon Ingersoll Rand compressor, I have tried a number of different regulators. Most of them failed after a few months, even only after a few days. Pneumatic Plus will be my first choice should I need any more regulators in the future.

Mylo Bird

| Mar 27, 2021

This is junk

3/5

I was forced to replace the factory pressure regulator on my 80 gallon compressor in my busy shop. I ordered another brand of regulator, but it worked for only a week before it broke down. As if by magic, business stood still once more. After receiving the regulator, I found it to be damaged, with the top seal busted as well as the gauge and glass broken. There seems to be a problem with the return I was sent. My goal is to buy a regulator at Tractor Supply in the morning.

Marcus McIntosh

| May 07, 2021

Everything seems to be going well so far

4/5

It is not the most expensive unit, but it has done its job even after a few hours. Assembly and installation can be done by anyone who has done some piping work. I am pretty happy with the I found the adjustment of the pressure a bit stiff, but I knew the internal spring had to be rated correctly for this pressure rating, so it wasn't a.

Quinn Hoffman

| Aug 29, 2020

This is quality! The five products I've purchased from PnematicPlus are among more than 10 I've bought from the company

5/5

This is an exceptional product in terms of workmanship and quality. The installation process is very straightforward, as well as the operation of the software. This company has taken a different approach to making things in a world where most things are made so cheaply. This is definitely worth checking out!.

Trevor Pacheco

| Jun 19, 2021

Quite a nice, well built, built to last

5/5

I will most likely set it and never adjust it. I will see how long the.

Kingsley BIRCH

| Aug 25, 2020

A maximum output pressure of 150 psi is advertised with a maximum input pressure of 250 psi

5/5

What I wanted it to do, it does. There is only going to be one purpose for it in the near future. It has been attached to an air gun.

Rosalee MAHMOOD

| May 02, 2021

It's a good fit

5/5

An air pressure regulator like this is used in a home shop to control the pressure of tools like paint guns and impact wrenches. The regulator appears well made and is easy to operate.

Ridge Pitts

| Jul 10, 2021

It is worth the money

5/5

The Harbor Freight regulator I was using was replaced by the one I have now. In addition to the higher quality and accurate pressure regulation, the price is also lower. I have been using it for a few months now, and I am.