XINGYHENG 120pcs M3 M4 M 5 M6 M8 M10 M12 Wire thread Inserts Steel sheath Helicoil Type Screw Repair Sleeve Assortment Kit with Plastic Box

XINGYHENG 120pcs M3 M4 M 5 M6 M8 M10 M12 Wire thread Inserts Steel sheath Helicoil Type Screw Repair Sleeve Assortment Kit with Plastic Box

$ 14.99

Score By Feature

Based on 125 ratings

Value for money

9.52

Easy to use

9.18

OveReview Final Score

How Our Score Is Calculated

Product Description

304 stainless steel was used for the construction of the item. It is beautiful and practical, has high hardness, and does not deform when exposed to heat. As a result of nickel bonding, a thin layer of anti-oxidation is formed on the surface of the material, which has durable wear-resistant properties, rustproof properties and corrosion resistance. Additionally, it is

A thread diameter of 3mm/M3, 4mm/M4, 5mm/M5, 6mm/M6, 8mm/M8, 10mm/M10, 12mm/M12 is accepted. The total is 120 pieces based on 7 values.

A good character is one that is solid and difficult to slick, has a deep thread, uniform force, no burrs in the thread, is clean, and is clear.

In addition to its continuous high strength, high precision, reliable anti-seismic, anti-impact, and anti-abrasion properties, this system can neutralize the pressure within the machine body, protect the threads within the body, and indefinitely increase the longevity of the mechanism.

A wide variety of applications It has been used in diverse industries such as aviation, automobiles, steam turbines, electronic communications, computers, lamps, molds, mechanical equipment, radiators, and semiconductors.

Questions & Answers

Installing these inserts needs a special tool. What do you use?

I bought these inserts for extra inserts you mentioned in your question. This kit comprises 131 pieces Rethreading Recoil Helicoil Repair Tool Set Metric M5 M6 M8 M10 M12 and these inserts to help with threading.

When I screw my barbecue grill, the wheel spins as if there is a problem with the threads or the thread housing. Do you think this would be helpful?

In order to replace damaged threads, helicopter oils are used. Besides the taps and dies, you will also need a set of hammers. It will cut the threads on the helicoil that will fit your bolt. The hole will be slightly larger to accommodate the helicoil and the bolt. Make sure you have plenty of metal to work with when making the new thread. In addition to the locktite, I would also cover the outside of the helical coil with something similar. In this way, you will be able to prevent the bolt from spinning while you tighten it.

Does it get made in a particular place?

It's a China

Is it possible to find out what size drill bit is needed?

It does not, but the one I bought a few months ago does.

Selected User Reviews For XINGYHENG 120pcs M3 M4 M 5 M6 M8 M10 M12 Wire thread Inserts Steel sheath Helicoil Type Screw Repair Sleeve Assortment Kit with Plastic Box

Stainless steel is not used to make them

3/5

As magnetic as steel, the coils can be used as a regular object. No indication can be found on the package that the steel is The Amazon description is the only place that says.

Trinity Costa

| Mar 13, 2021

It is a good product

5/5

I have used it for automotive repairs. This works well, but you need to make sure that the insert is inserted all the way. In the case of an oil pan that I constructed, the insert leaked because I failed to sink it deeply The 6 mm bolt on the pulley snapped off and I had to drill it back in. However, it was not as enjoyable as it could have been. Luckily, it came out fine and didn't need to be enlarged. I just had to resize You tapped the hole and put in a second one. It has a very high pullout force. It is suggested that oil pans, etc. , be gasketed with a suitable compound.

Alana Strong

| Apr 04, 2021

I am happy with the results

5/5

I must add. My purpose for purchasing this kit was that I already had a large assortment of drill bits and a full set of tap and dies. After you drill out a hole, you will need to tap it, but the sizes of the tap are not standard. an abnormal pitch count so as to make the new threads resist rotation with the bolts that you are installing. By doing this, the threads remain apart from the old threads. In my experience, I had found the reason why I was getting 2 thread inserts stuck in holes that weren't tapped properly. A kit of drill bits, taps, threads, and installation tools was the result of my purchase. Therefore, if you do not have the correct set of M4, M5, M6, M8, etc. taps, you will need to purchase The thread inserts come in handy for anyone who has already used up all of their.