TOGGLER Toggle TB Residential Drywall Anchor with Screws, Polypropylene, Made in US, 3/8" to 1/2" Grip Range, For #6 to #14 Fastener Sizes (Pack of 20)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I have no problem with that. If you have a 3/16" or 1/4" hole, that would work too
As far as I have seen, all doors are mounted on the frame around the door, and these frames are An anchor for this kind of material is better suited for drywall, as they are hollow behind the surface. It could be mounted to something hollow if for some reason the hinge was mounted to something hollow. However, a door would be nice. To stand on solid ground, you need to know what you're doing. It might be helpful to apply some wood putty to the wood and wait for it to set. Replacing the screw with the original type is best.
The togglers I bought have a 1, but I purchased the 3/8" to 1/2 " togglers. In the package are five phillips screws of different sizes
It is imperative that grab bars be anchored to studs. Please note that this is only for light duty driving wall applications. Don't forget to be cautious
Selected User Reviews For TOGGLER Toggle TB Residential Drywall Anchor with Screws, Polypropylene, Made in US, 3/8" to 1/2" Grip Range, For #6 to #14 Fastener Sizes (Pack of 20)
It's just one of those things that work. When I first tried to open the first one using the red plunger that came in the kit, I had a bit of a hard time getting it to work, so I just used an allen key of the same size. The screw in the anchor seemed easier, too, since I had to cut the threads into the plastic just before starting it. The screw was removed, the anchor was installed, and then the screw was replaced The screw was installed into the same thread that I had previously cut. By doing this, I was able to reduce the likelihood that the anchor would spin as I drove the screw.
I have been having problems with the plunger. In the vast majority of cases, these are the best wall toggle products. The bag has been my go-to bag for 20 years, and I buy it whenever I can. All I can think about is the red plastic plunger that keeps me from giving these 5 stars There is too much brittleness in the material. My habit is not to bother with the plunger anymore, and instead I just screw into the back of the jug to pop it out. However, it would be nice to have a working plunger, to hear it "pop. " You can use these, but take note of the darn plunger! They work great.
The weight I had was about 15 pounds. Two of these are attached to a coat rack hanging on the drywall That's a 7 out of 10. The screws should be loaded steadily at 5 lbs per each. Although an additional 8 oz is added by the wooden coat rack, it is not heavy. An anchor is assigned a static weight. About a year after it was installed, the coat rack came crashing to the ground. A piece of plastic had snapped off of each anchor. In some spots, the anchor was white after the installation process had fatigued the plastic (this is the correct installation method In its folded and fanning form, the plastic seems to extend One of the anchors snapped, so the only leak was caused by the snapped plastic. As for the holes in the wall, they were fine the snapped anchors folded up and pulled back through the original holes in the wall. There wasn't enough space between the anchors and the holes that I drilled, but they should fit through just fine. Obviously, this is a very dangerous situation. In this case, the load was less than 10% of the rated weight of In addition, if a pet or child had been beneath it, the hard corner of the wooden coat rack could have brought serious injuries.
It is SUPPOSED to be provided with TOGGLER (twenty) Anchors to toggle the The following items are required (20) #8 x 112" Setting key is (1). The answer I got was TOGGLER (twenty) Anchors to toggle the The following are the required screws (22), #8 x 112" Set key (NO) is not required. These anchors work very well, but without the necessary pieces to make them work, it isn't easy to make them work. Using a very small Phillips screwdriver, I was able to fix the problem An appropriate setting key is a screwdriver with a flat head.
1) You will need to drill a pilot hole first, and it will leave about a 1/4 inch hole in the wall (when you install the toggler, it looks like the 1/4" hole, but make sure it isn't all over the wall). If the wall is hollow on the inside, be sure to double check In order for the toggle to work, the drywall must be folded up so that there is enough room for it to go through. Then, AFTER the red nail is used, the butterfly tips will open, which means the toggler works. An insert is like a tab that you push in to expand. In other words, the tabs grab the interior of the wall to hold the toggler (and whatever else you're hanging) up. The tabs should be opened, then you should screw in your screw, and then you should hang your item.
3) They work great They work on drywall as long as it is hollow inside and the drywall is hollow. You won't be able to put them into action if you hit a stud or hit any kind of obstruction. Some might not think this is worth mentioning, but I believe it deserves to be mentioned. As a result of this, the bottom line is My favorite method to hang items on drywall - they're the best I've ever used In addition to hanging shelves and pictures, we have used them as hooks to hang other stuff, too.
These are the best to use if you are able to reach a stud in a wall but can't reach it yourself. I found these at Home Depot several years ago and buy them on Amazon since they're cheaper than locally. The types you just insert into the wall always pull out or break on me. I first found them at Home Depot several years ago, but like to buy them on Amazon because they're cheaper.
If you don't know beforehand what thickness of sheetrock or wallboard you have, you may not be able to flip them out and lock them. As these are plastic, you only can remove them by drilling them out. However, you can easily do this as they are easy to drill out. Furthermore, these are secure once they have been properly installed, and you don't have to worry about them falling apart with time. I have used them to mount glass shelves, wooded shelves, etc and they have all been reliable up until this point.
It has not worked with Zippit styles, even the metal ones, with the standard wall anchors, or even with some of those really expensive Zooks wall fasteners. The only thing that will work is full on toggle bolts, but these The holes are much smaller, each one holds a substantial amount of weight (I can hang 2 wooden wall-mounted bookcases stuffed full of books on all 8 and they do not make any noise or cause damage to the wall) and they are very Only one thing you have to keep in mind is that the tool you use to press them into place stinks. They work, and the ones provided (there are two in a package) last for about 3/4 A small screwdriver is all I needed to push them out after the tool broke - it made it easier, and it didn't necessary for me to replace any.
The only thing I saw were the screws in the failing anchors of the drywall. Leaving huge holes in the ground bought these thinking that I would probably end up with larger I hope they work for you. The walls are now firmly attached with no loose screws to be found. It was no trouble at all because I didn't have to fill any holes!.