DOLPHIN Amphenol Plug
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The grade for this is a 4 There are two pins on the connector. Almost all Dolphin pool cleaners can be used with it. The plug has four connections that can be used in conjunction with each other. You just need to match up the power supply wiring.
It is necessary to use an Allen wrench with a size of There are 5 mm in length. In a big box store, you can purchase an allen wrench set. A 10-year look at the data One of the wrenches I purchased was required for installation, so I purchased the set. A 5 mm wrench or any small wrench from the set will do. The one I have is from HD and cost
Selected User Reviews For DOLPHIN Amphenol Plug
In my analysis of the problem, a broken wire was found in the long cable that connected the power unit to the rotating connection of the robot. There appeared to be a bit of twist in the power cable under the plug, and there was no continuity on one wire, so I assumed it was the plug or It has been mentioned in other reviews that you need to check the wiring and connector There are numbers 1 and 2 on the inside of the plug On pins 2 and 3 of my unit, I used a Y-splitter. In order to make sure I aligned the wires to the back of the new plug, I checked continuity between the pins and wires on the old I was correct in thinking that there was a break within the cable after I severed it, or within the plug or the first few inches wholly within the cable itself Keep a few inches of the old plug attached so that you can verify that the wires are pointing at the right pins. The black pin on my unit was connected to number 3, while the white pin was connected to number 2. As the wires go into sockets, I didn't see a way to solder so I just inserted 1/4" or so into the connector and it seemed to work fine. [Updated with information It took me a while to realize I had missed the allen screws the first time. It stopped working and when I disassembled it, I realized that the wires were loose. ] The plug reassembles well after tightening the screws just be sure you assemble the parts on the wires in the right order prior to It has saved me at least the cost of buying a new cable ($200+) and I'm now able to use all of my equipment.
At the connector in my Dolphin Deluxe 4, there has been intermittent behavior in the cable. I was delighted to find a replacement that worked perfectly. As you can see, the original has two A four-star one like this has four stars. So there is no problem with the socket on the power supply having four holes. If you replace the cable, make sure to cut the wires about an inch from the plug so that you can use a continuity tester to determine which pin the wires connect to. I connected the white wire to the top right pin (the index is at the bottom). A black wire ran from the bottom left to the top right. For tightening the connection in the new jack, you will need a tiny allen wrench.
When replacing a faulty plug, it is crucial to carefully disassemble the old one in order to install the new one correctly. Although there were still challenges, having pulled things apart carefully, the order of wires had to be correct after only two attempts. I am sure this is self-evident, but I am sure it is not. It may seem obvious to many people, but it could put someone's life at risk.
It is an awesome product, and I watched the YouTube video on how to install it. It worked like a charm.
Until my dog chewed up the previous one, I thought I would have to buy a whole new one. This one worked great! The only problem is it doesn't give you a visual clue as to which cables you should put into which holes, so if you have only two cables, you'll really have to look at them carefully.
The system worked fine.
As a result, I was able to fix the problem with the wire connector using this product. Replaced the entire device for a fraction of the.