AUKENIEN 100 Pcs 0 Ohm Resistor 1/4W Metal Film Resistor RoHS Compliant with ±1% Tolerance, High-Accuracy 0 Ohm 1/4 Watt Resistor for Electronic Circuit, Alternative Resistance Available

It was a good idea to buy a bunch of USBs When I try to charge my C device, I find out it can only be done with A to C cables, not C to C cables. Thus, I was required to bring an extra USB-type charging cable A USB cable and a c to c cable All they need is a charger to charge them. Later, I discovered that they are not charging because they are not connected to a usb electrical outlet It is not automatic that a pd charger produces 5 volts. Your device needs to be told there are 2 5 volts present for it to work. The pins on the board have a 1K Ohm resistor soldered to them. This diagram shows two connections, one going from cc1 pin to ground and the other from cc2 pin to ground (labeled A5 and B5 in the schematic) The common connection for the devices is a 6 pin usb-c connection It is composed of c connectors. The images can be found by following my image. Depending on the device, you may have more or less room near the port. In my cases, I found that the resistors could be easily plugged in right behind the connector. There are no differences in width or height between the port and them. Other times you might need to use an smd resistor, determine which pin is cc1 when the pin layout is different, find out which pin is ground, etc. I have enclosed my usb cable schematic. I can charge it with the same cable as my laptop now that I have a C mouse. I have a lot of fun! Hopefully this is of use to someone!.

Mccoy Sweeney

| Feb 21, 2021

Consumers should have told me about their previous experiences. Using this product, I was unable to produce the correct amount of exact 2 ohms for a test of an airbag. I test all 100 and got 2 out of them as the closest to the real thing. Ohms are 2. It is not recommended to buy these resistors to test airbags If you want something more accurate, you need to go to a. It is common for airbag systems to malfunction if not within a certain range Impedance 1 ohm.

Elena Daly

| Aug 19, 2020

The exact thing I was looking for and more! The service was perfect, and I recommend it highly.

Kylian Rice

| Oct 06, 2020

I am very pleased with my.

Paulina Maddox

| Sep 02, 2020

There are several problems with this product. In the pack of resistors, there are many failed resistors.

Roberto Tanner

| Jun 02, 2021

Item arrived in good condition.

Cillian Vaughn

| Mar 23, 2021

Here, we have a collection of resistors that use a dark enough background to allow the color rings to be seen from a distance. When it comes to these tiny quarter watt jobs, no one actually reads these anyway, so using a DMM to determine their values is I do not have a precision resistor that I can use to calibrate my meter but can say the variability I saw in a random subset makes the "1% tolerance" a bit suspect. Every one read below its rating while most were within 2%. Generally speaking, these are fine for current limiting LEDs (my primary use) and such, but do not delude yourself into thinking they'll be precise.

Clementine Fletcher

| Nov 17, 2020

Previously, I had not had any 10M Ohm resistors on hand to complete a couple Arduino based projects, and this worked perfectly for me, so I went to Amazon to see if I could find any good deals, found these, and decided to give them a shot. I randomly tested a few from the pack, and they all complied with their 1% tolerance. As shown in the photos, they arrived as shown in the photos. Thus, I was satisfied exactly with the services I required and was expecting. I'm all set to purchase more of these, since they are working so well for my projects, such as selecting antenna sensitivity for a radio/EMF based device.

I'm satisfied with my purchase and would make another purchase.

Olivia Liu

| Feb 17, 2021