Toroid Core FT240-31 Ferrite
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The average diameter of the object is The width is 40 inches and the height is 61 inches. The measurement range is 0 mm plus or minus The diameter of the tube is 30 mm, while the id is The size of the frame is 40 inches x 35 inches. A margin of safety of 55 mm is recommended There is also a convenient location in the product description in the listing for this size.
According to the listing description and FairRite, these specifications are provided The range of frequencies is as follows The following are the first three In this scheme, 300MHz equals EMI suppression level 1. A frequency of 500MHz
The Gauss B 3900 calculator
A plug's size determines how much power it can provide. According to the specifications, the core has an inner diameter of 1 millimeter. The width of one inch is four The plug should fit if its dimension is less than that.
Selected User Reviews For Toroid Core FT240-31 Ferrite
This product you already know that they are used for since you know what it is. You can rely on them! As a result of RF in the shack affecting my PC and causing WSJT-related problems, I had to turn off my PC. I hit a wall when I ran on 40 meters, causing X to crash. The ferrite chokes on the coax worked well with a few watts of RX power but provided limited success over a few watts of TX Thus, I bought a couple of them and wrapped the USB cable from my IC as follows My PC is connected to my 7300 via one of them. That was the solution to the problem! In a similar manner, I used the others on the power cables for my laptop and my rig. The product worked so well, I bought several more for insurance purposes. I have not tried it yet, but I am told that they are equally effective if you have unwanted RF (from or into) other electrical devices in the house.
A friend of mine is an electronic engineer, so he told me to get these to prevent radio frequency interference. Two sources led me to this information. As a result of the USB connection to my ham radio, it was getting into my iMac and destroying the house's wifi router when I used 80 meters (a separate In order to use the device, I wound 10 turns of the cord through the torroid close by it. Done and dusted. Interference is no longer an issue.
I got rid of a RF issue.
Here are two nice 2s I made. The baluns will be used on loops spanning 80m and 20m.
That fixed the problem and the hum was gone from my remote speaker on my VHF rig and my remote speaker on my remote scanner. This is something I'm going to order more of.
A best toroid core for producing baluns in Ham band. When I have 1500 Harddown in my system, I use 3.
This is very good. It is the power cable that I used with my Samsung tablet. SO I THINK THE INTERFERENCE IS COMING FROM AN ADDITIONAL DEVICE. IT WORKED THEN IT DIDN'T, SO I THINK IT IS AN ADDITIONAL DEVICE.
I purchased this to suppress RF. It worked perfectly. I felt the prices were a bit high.