Quarton Laser Module VLM-650-28 LPT Red Laser Line Generator (ECONOMICAL LINE LASER)

Quarton Laser Module VLM-650-28 LPT Red Laser Line Generator (ECONOMICAL LINE LASER)

$ 22.50

Score By Feature

Based on 69 ratings

Customer service

8.29

Delivery

8.60

Value for money

8.63

Satisfaction

8.74

OveReview Final Score

How Our Score Is Calculated

Product Description

Laser with a Red Line that is suitable for short-range 3D scanning and bar code readers. At a distance of 1 meter, optimize the line width as follows About 2mm thick. The emitting angle is greater than 60 degrees. A 6*5 VDC operation is possible. This item is 9 mm wide x 26 mm tall. There is no power supply, plug for connecting, or other wiring terminals included with laser modules. Please be aware that laser modules are not to be sold with power supplies, plugs, or power supplies behind them. It is because modules are merely components, so you will have to wire them independently to your own power source.

There is a 645*665 nm wave in this pattern. A laser with a power level less than 0 powers is classified as Class I. (Updated 04/13/2021- According to the latest IEC 60825-1 regulations, the output is measured by a 7mm aperture stop at a The Class of the camera will be changed from "Class II" to "Class I" now, but the brightness will remain the same.

This laser has a red line on it. In spite of the fact that it is an economical solution for laser line generator applications, this module offers industrial-grade high-performance design, which means that it can function 24 hours a day, 7 days a week (which does not apply to A mean time to failure (MTTF) of 10,000 hours at 77°F

With this module, you get an integrated wave lens, a collimating lens, a laser diode, and an APC driver. Using an APC driver circuit, the laser's output power can be continuously maintained. You are not using a laser pen with this item. The usage of laser modules is not supposed to be commercial like the use of pen lasers.

It has a patented solid brass structure that is incorporated to increase shock resistance and heat transfer. A plastic lens shaped like an spherical disc and plastic wave lens create an elongated line laser.

Questions & Answers

Is this module capable of pulling a lot of current?

We specify less than 35 mA in our specification, but the typical pull is 25 mA. I am interested in the VLM. From 650 to

How does it work? Can I use batteries or do I need an electrical outlet?

A power source providing between 3 and 5 volts is needed. This may be accomplished with a 5v smartphone charger connected to the leads, followed by the cable pulled apart and attached. This is the basic process I used. If you want to avoid damaging your laser module, just make sure the positive and negative leads are wired correctly. If you're having problems finding one, you may have luck finding two. This will work fine, as long as there are 5 v batteries connected in series (which has been tested).

A thin line is possible, but how thin should it ?

In terms of Laser line width, we find that (is designed to have shorter distance) at 1 meter Quarton customer service center

How long is the laser line if it is hung from 7 feet in the attic to 7 feet in the attic?

Three lines are present in the article. One hundred seventy five feet. This is due to the 90-degree angle of its emitting rays.

Selected User Reviews For Quarton Laser Module VLM-650-28 LPT Red Laser Line Generator (ECONOMICAL LINE LASER)

The rip Buy a laser for $3 that is of better quality

3/5

[Edit] After reading my review, the seller refunded my money without asking (I was already past 30 days, and didn't expect a refund), without asking. I am glad to hear that. Hell, I may even take the risk of buying one of the more expensive lasers now. I'm not sure I could justify spending $50+ on a laser on any of my past projects, even in the perfect world. My rating was five out of five for the seller This still only deserves a 3 star review, so I'm leaving it on the same note as others have done. [end of edit]

There is no focus on this, so it looks terrible from all angles except one. There is about a 2 meter distance between these objects. The middle line, however, is much thicker than the sides. In an ideal range, the $3 cheap-sounding tee shirts would cost between $150 and $200 The lines produced by lasers are of higher quality. "The laser has a bright light Chinese lasers that use class 3 technology while being sold as class 1 are not as bright as comparable devices manufactured in the U. S. , but they are much brighter than the ones sold as After considering several different line lasers, I went back to the $3 line laser I was using before because it was a much better product. Quarton calls this an "ECONOMICAL LINE LASER. ". It is true they are 8x more expensive than better lasers, but that is not exactly the case. Even though it is less than half the price of the next step up in the Quarton line, it is still incredibly overpriced in comparison to other lasers that are more thorough. To make sure the cheap laser is not bad quality, you can buy the best one at the same price and compare the quality of each. The body of the laser is kind of nice it does not have the cheap look of cheap It is the beam that is the basis of a laser The body is not responsible for the content of the text. Additionally, the body is unable to adjust the focus, so it just looks nice, but it is a I would like to convey the following to While I appreciate that you want to offer a cheap laser for people not willing to invest over $50 for a basic line of products, this is just a terrible product that shouldn't exist. Your higher end products probably deserve more credit. Unfortunately, I won't be able to find out because I won't risk putting my money at risk again after using this. Lasers are something I buy frequently, so I wanted to give your company a try for my higher-end My friends and clients will lose your business in the future, as well as future sales from me and my friends. There was no profit on a $25 sale, I guarantee it.

Maxton Bowen

| Apr 18, 2021

The class is The architecture is nice, but the quality of the optics is poor

3/5

Brass packaging is very nice - I like it The reason why I chose this over the very inexpensive one available on Amazon is that this one is built to last.
I also like the fact that it has a Class-II rating It consists of a laser of at least 1mw. The optics, however, are very poor, the line is too thick the effect is not as dramatic as it might be. There is a 3mm difference in the center, and it is As it gets closer to the edges, it becomes narrower. The edges become choppy as well, as it stops being continuous at the edges. A 3D scan is not possible with this object. There may be a problem with this As soon as possible, I will replace it and provide an.

Jamari Escobar

| Apr 20, 2021

I can live with the price, but the width between devices can vary greatly

3/5

For use in a drill press pointer, I purchased two of these. Despite being well made, they work okay for their price, but the laser line widths in the ones I've received are quite different by a factor of two or three. I found that the first one was fine, but the second one had a significantly wider line output, making it very The seller gave me a few suggestions but nothing had a lasting effect. It is also possible to spend more on a laser with better manufacturing quality if you need a wide line width.

Nathanael Lee

| May 01, 2021

I give this rating of five stars

5/5

An ad states that this laser is a good little powerhouse.

Ezra Johnson

| Feb 15, 2021

My project needed a very fine line, so I found this tool to be the answer

5/5

It produces a very crisp line.

Logan Lyons

| Dec 17, 2020

Create a better product

4/5

I got this for a build it better project at university, and it was given an A, but I lost points for its long wire (not allowed to modify its components).