Linkind Dimmable A19 LED Light Bulbs, 40W Equivalent, E26 Base, 5000K Daylight, 5.7W 480 Lumens 120V, UL Listed FCC Certified, Pack of 6
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
They are low wattage, however, so I would not see any reason why they couldn't be used with an enclosed fixture * if the fixture used a 100W It should not be a problem to use the 19W LED bulb
In both cases, it is possible to physically fit an E26 bulb into an E27 socket. It is important to remember, however, that just because a bulb fits and operates, that does not mean your lamp installation is within the electrical safety standards for which the lamp and lampholder were designed. An incorrectly matched installation can lead to a greater risk for short circuits and A bulb with an E27 designation should be made from plastic and used with E26 lampholders in general, but E26 bulbs pose a safety hazard when used in an E27 lampholder and with The short answer is that I won't be using
Thanks for your interest in Linkind bulbs, dear customer. The bulbs will diffuse light, not produce accent light, because they have a beam angle of 230 degrees. I appreciate it. A Linkind Team representative has been assigned
This is a 4-part set This click switch sounds like it belongs on a "3-" Three levels of illumination can be achieved with the use of a "three-way" bulb, which has a base that allows users to control two filaments. Despite the fact that there are three Although there are a number of different types of LED light bulbs, the Linkind bulb is not one of them and would have to be paired with a normal An example would be a 3-foot high wall For a two-way socket, they would simply provide an on or off mode.
Selected User Reviews For Linkind Dimmable A19 LED Light Bulbs, 40W Equivalent, E26 Base, 5000K Daylight, 5.7W 480 Lumens 120V, UL Listed FCC Certified, Pack of 6
If you are looking for bulbs, I hope this helps you! I purchased these in the "warm white" version 100 watts. Those cooler leds have a bright blue color, and I hate it. It's my favorite thing to dim bulbs, and I have tabletop dimmer slide switches and rotary dimmers all over my I discovered a good dimmable bulb a couple of years ago called Philips warm glow. In general, the darker you go, the warmer the color/hue appears. They're pricey, but you can choose from a wide variety of styles and models. They cost me an absurd amount of money. The process has been successful overall, I've had a few hiccups. It looks good on me if it's bright and colorful In some spots, there is too much light. These are the Philips 60, 75, and 100 watt bulbs I have used. Now for the crux of the matter. When you increase the power of a bulb, its size will increase as well. According to the size of the base and the bulkiness of the bulb, there appears to be some sort of cooling issue. There are a few overhead fixtures that have glass covers or enclosures. It's not uncommon for me to need bright lighting in these areas (shower, laundry room, It's challenging for me to fit anything above a 60 watt Philips product, as the space is so small. The bulb burned out one day, but other than that it gave off a lovely warm yellow glow.
I looked for higher wattage standard size bulbs and stumbled upon this pair. The reviewer who verified the size (and the product description, which we all know can sometimes be inaccurate, especially when multiple versions of an item are available) was greatly appreciated. As you dim the bulbs, the light becomes less warm and more cool. They have a fantastic warm yellow light when at their brightest. If you look at them at 50% and below, they definitely look like a regular "light" or "cool" That's too bad. The Philips Warmglow is also the exact opposite of this. I am able to fit them into my fixtures because they are sized like a standard 60 watt Hence, the first two are the ones I use most often in areas where I need a very bright light more than a dim light. Shower and It is nice that the option is dimmable, however I need to see what I am shaving and which stains I need I will use these in order to gain this advantage. In exchange for functionality, aesthetics are traded. If you don't care about the blue hue, these are just fine dimmed There is a yellowish hue to it. Whenever the brightness is at maximum, it is extremely warm. When you need a dim light for the bedside table, for general ambience or when you don't need something with a size restriction, I prefer Philips, as it's warm at lower intensities, but I can ramp it up when necessary. No prob, I am very "discriminating" and can be described as such My husband has often said that I am a picky control freak. I see more colors and hues than the average Joe, and old instructors and the guys at the paint store always give me the side eye when I do something for the first time. In addition, I think too hard about things like this, which have no significant consequence. you're like me, then this might be helpful to you!
Obviously, I cannot comment on their longevity, but given their price of a little under three bucks each, I am happy so Certainly would have preferred if they had kept that warmth at a lower brightness!.
It is not true that these are Energy Star certified, although they are advertised as such. There is no logo on the packaging and they do not produce any energy star results. It's the government.
I did not see any flickering. did not measure exact numbers but the lights turned on about 60 seconds after the power was turned on A 70-volt dc power supply. Without jumps in brightness or flickering, the brightness range goes from off to full. * * * all regular incandescent dimmers will work.
Despite the fact that these bulbs may be good, the package is damaged. What should I do if I want to mail these in plastic mailers? My mistake was assuming the lamp was faulty when I inserted the faulty bulb and it worked for a week then died. I thought it was the lamp, but it was the bulbs as the failed one worked after it was reinserted The box of bulbs should be packaged in a cardboard box, since I really wanted to like this product.
The pros are It appears that the lumen rating is accurate. I like how bright they are. The cons are Any slight drop in line voltage causes the lights to flicker. Running appliances such as the washer, dryer, or dishwasher cause them to They completely black out for about half a second when the furnace kicks on. A lot of people find it annoying. In watts, we have 60W and 100W. Both watts are capable of running the system.
These bulbs that I purchased for a bathroom renovation failed to live up to my expectations. It was very important to have "dimmable" lighting, so I bought these based on their indication that they would not flicker As soon as I inserted these bulbs into my new 4 outlets light, they wouldn't even turn on until I flipped the slider switch all the way up, and once they turned on, they flickered badly with my Leviton 6674 dimmers. Using Leviton's dimmer switches, they do not flicker and increase in brightness smoothly. For those who want to save money on bulbs, Amazon Basics is a great option. There is nothing dimmable about these Linkind bulbs.
Using the bulb for one month caused the bulb to burn out. In a six pack, that might not seem like a big deal, but on a ceiling fan 30 feet in the air is not what anyone would consider a small undertaking, which is why the maintenance person has to go through the apartment with a special ladder. the fact that I feel obliged to tip him since it is a pain and the bulbs I bought cost more than what I would have saved by buying a name brand. Definitely wouldn't buy them.
The lights flickered and did all sorts of crazy stuff when I tried to use an Insteon dimmer.