SSC Controls DS100-DG Dual Foot Switch with Guard, Electrical, Momentary Action, Two Pedal, 8-ft Cable with Leads, Twin Pedal, Left/Right, Up/Down, or Forward/Reverse

Hello and good morning. This pedal has a shared common, as well as a hot for the left pedal and a hot for the right pedal, as well as a ground. It's set up in such a way that you can't press both buttons at the same time. So, if your circuits are already set up for forward and reverse, you could use this pedal to successfully energize each circuit, and the answer is yes. However, in the cases where I've seen reversing DC, the switch is supposed to reverse polarity, which this won't do. In that case, you'll need a 6-piece set. Setup of the pole: 2 in, 2 out, 2 in, 2 out, 2 out, 2 out, 2 out, 2 output, 2 output, 2 output, 2 output, 2 output, 2 output, 2 output, 2 output, It can be controlled by a foot switch, but it necessitates a significant amount of wiring. Give me a call or send me an email if you'd like to see it. mail. SSC Controls Co.'s Jim Moll thanks you for your time. 440- 205- 1600

This pedal does not reverse the direction of the DC current. To accomplish this, you must physically reverse the polarity of the electricity by rerouting it in an X pattern. A common and two hot leads are included in this product: The first will be energised, followed by the second. As a result, it's only suitable for AC use. Give us a call if you need a DC reversing foot switch, and we'll talk about what you need to do to get one. SSC Controls Company's Jim Moll thanks you. 440- 205- 1600