SPW Hunter PRO-HC PHC-1200i 12 Zone Indoor Residential/Professional Grade Wi-Fi Controller with Hydrawise Web-Based Software - 12 Station - Internet Android iPhone App

Apart from a rain sensor, the C irrigation controller, while functional, lacked wireless capabilities and intelligence to adjust to the weather. As my experience with intelligent adjustments grows, I will update this review. br>br>Decision: br>br> I had to choose between this model and the Rachio. The Rachio had a lot more customer reviews and was highly rated, but there were some obvious drawbacks, such as a lower quality approach to wiring connections and adequate space inside the controller to make the connections, limited ability to control the irrigation system completely from the touch screen as needed, and my familiarity with the Hunter brand. The Rachio has been defeated by the HC. br>br>Installation: br>br>Installation: br>br>Installation: The process of replacing my old controller was simple. I removed the old controller and mounted the new controller to the wall in the same location after photographing all existing connections and labeling the wires. Because my wiring entered the controller through the wall, I drilled a hole in the controller's back in the designated knock out space. The screw terminals made connecting all of the wiring leads a breeze. There is enough room inside the box for access to the wires, resulting in a well-organized installation. br>br>Assembly: br>br>Assembly: br>b The setup wizard on the controller's touchscreen guided me through the process of connecting to my home's wireless network. I have a strong signal inside because I'm close to my access point, and once connected, the controller's touch screen displayed the serial id, which I entered into my Hydrawise account on my phone or computer. The rest of the setup was done using the Hydrawise web page, which was guided by the wizard. br>br>Installation: br>br>Installation: br>br> The web page as well as the iOS app are both fairly simple to use. They make it possible to plan ahead of time. defined schedule based on zone run times and configured start times, with both set days and times and interval based options. The system can then be configured to increase or decrease watering run times based on temperature, rainfall, wind, and other factors, as well as to use smart watering. The scheduled irrigation times, as well as any adjustments made due to weather conditions, will be displayed in a calendar view. If you're on the free plan, you can choose from a free National Weather Service station or local weather underground stations when setting up your station. If you're on the paid plan, you can choose from a variety of local weather stations. If you have your own personal weather station that is broadcasting to Weather Underground, you can send it to Hunter and he will update your account to allow you to use it without having to pay for the paid service plan. Advantages: br>br> br>Professional controller and case with well-considered connections. Support for up to two sensorsbr>Made by a reputable irrigation companybr> I've connected a wireless rain sensor and will eventually add a flow sensor. br>Able to control zones and adjust schedules from my phone or a web pagebr>Can completely control irrigation system at the controller and will continue to run last schedule if internet connection is lostbr>br>Considerations: Online schedule updates are only sent to the controller once a day with the free plan. Hourly scheduled updates are pushed by the paid plan. Granted, I won't be changing my schedule on a regular basis, but this loses me a star. In addition, rather than an immediate push, the controller appears to use a polling approach when manually controlling a zone from your phone or PC. When you choose to manually run a zone from my phone, the app will typically say that it will start in a matter of seconds to a minute - If you are interested in the software, you can create a free account without a controller and configure a "virtual controller" to see if it meets your needs. br>br>If you are interested in the software, you can create a free account without a controller and configure a "virtual controller" to see if it meets your needs. br>br>If you are interested in the software, you can create a free account without a controller and configure a "vir br>br>After a few months of use, here's an update: The ability to adjust the schedule from my phone / web while sitting on my couch or while traveling has been a big plus. I installed a Hydrawise flow sensor, which provides good insight into water usage (though it appears to overestimate actual usage) but primarily provides alerts of unexpected water flow, which could indicate a broken line. The cloud-based logic has suppressed watering on several occasions due to a high probability of rain.

Chaim Page

| Dec 24, 2021

Due to its WiFi capabilities and previous reviews, it has been given a high rating. I upgraded from a non-WiFi Toro GreensKeeper 212, which performed admirably but lacked WiFi. It took me about an hour to complete the installation. Wiring was simple, and if you've installed one before, you won't need to read the manual. The most challenging part was aligning the wires to come in through the back of the panel and drilling out the extra knockout. That necessitated the use of a 1" drill bit. The other part of the setup was to make sure you entered your serial number in the App Wizard so you could control it from your smartphone. This should be self-evident, but I missed it. It worked fine, but it took me about 15 minutes to figure out. It was simple to program from the App once it was connected, and it was also simple to set up the program. It's also important to make sure you set up the location for the area you live in so you get the right weather data. Because of the reliance on weather data, you won't need to turn it on during the colder and rainier parts of the day. When I was away from home, I tested the remote on/off functions, and they worked flawlessly. I'm curious to see if my water bill shows any savings once I've finished watering for the summer. I would advise you to go with the Pro - If you're looking for a WiFi-controlled irrigation system, this is the one to go with. Note: I have an iPhone and a dual-band router that I use to control everything. There were no issues with WiFi at all.

Paige Good

| May 29, 2021

It connects to my wireless network without a hitch. It was a breeze to hire - This Rainbird system was installed by someone who had previously had a Rainbird system. This one has taken the place of my rainbird. My water was not turned on, despite what the console said. On a Sunday night, I emailed Hunter through the "contact us" page on their website. Because I registered the product online, they were able to diagnose the problem and determine that my solenoids were receiving a signal. Everything now works perfectly after I checked a small box in the software/app labeled "MHV, Master Valve. " Excellent, quick, and technologically advanced service.

Makayla McKinney

| May 03, 2021

To upgrade to the Pro HC, I canvassed local contractors. Between $650 and $700 was spent on the controller and installation. SprinklerPartsWholesale has the Pro HC for a little over $200 on Amazon. I figured I'd give it a go on my own. It was a piece of cake. Disconnect the existing unit from power, label or photograph each station, com, pump, and sensor wire, remove the old panel from the wall, mount the new panel on the wall, route each wire to its corresponding post, plug in the controller, and follow the simple instructions to connect to WiFi and set up a watering schedule. It couldn't have gone any smoother. From start to finish, it will take you 60 minutes. SprinklerPartsWholesale actually delivered two days earlier than expected! I couldn't be more pleased.
,.

Elise Morrison

| Sep 13, 2021

I replaced an old rainbird controller that was malfunctioning. br>br>I simply photographed the wiring in the old panel and duplicated it in the new panel - bazinga. br>br>45-minute project. It's simple to use, and the app works well for controlling the system from a mobile device - That's the best way, because the controller's screen is small and easy to fat finger. br>br>My system has two master valves, one for city water and one for water I draw from a pond at the end of my yard, which took some figuring out because not all of the MV and comms ports were identically identified - However, after I installed it, it worked right away on all zones and a test program that I entered. br>br>The app is available for download for free. I did not use a rain sensor because it is able to use local weather data, which is also nice with some added features like local weather forecasting and so on. br>br>I love that I can program my system from the comfort of my armchair, rather than having to lean over an uncomfortable workbench in my garage.

Aila O’SULLIVAN

| Apr 05, 2021